All Products

SKU: EC-ASC7503RTC

The RTC Data Logger Shield adds SD card storage and a real-time clock to your Arduino, making it straightforward to log timestamped sensor data. It supports SD, SDHC, and microSD TF cards via an onboard toggle switch to select the card type. The shield is compatible with 3.3V and 5V logic levels...

SKU: SF-GPS-19984 · MPN: GPS-19984

The RTK Facet is an all-in-one high-precision GNSS surveying device designed to deliver centimetre-grade position measurements with a simplified field workflow. It combines the core electronics, antenna and logging hardware into a compact unit for geolocation, surveying and RTK projects.For every...

SKU: SF-SPX-24706 · MPN: SPX-24706

This connector assembly is a replacement part for repairing a SparkFun RTK Facet or RTK Facet L-Band. It is intended for users who are comfortable opening and servicing their device.The assembly is supplied for repair work rather than general prototyping or GNSS development. If you need a high-pr...

SKU: SF-SPX-24705 · MPN: SPX-24705

This replacement kit is for repairing the front display and exterior button area of an RTK Facet or RTK Facet L-Band. It includes the front display PCB assembly, a new overlay sticker with button, and a replacement flex cable.It is intended for users repairing a device where the display or outsid...

SKU: SF-PRT-19642 · MPN: PRT-19642

Keep your high-precision GNSS gear organised and better protected when you are working out in the field. This carrying case is designed for the RTK Facet kit and provides dedicated storage for the main receiver and common accessories.Custom moulded slots inside the case are shaped for the RTK Fac...

SKU: SF-SPX-24674 · MPN: SPX-24674

This replacement housing kit provides the enclosure and small parts needed to repair a SparkFun RTK Facet L-Band. It is intended for users who want to service their own open-source hardware rather than replace the whole unit.The kit includes the enclosure, protective foam, replacement stickers, d...

SKU: SF-SPX-24064 · MPN: SPX-24064

This is the main PCB assembly used in the RTK Facet, supplied as a replacement part for repairing an existing device.It is intended for users who are comfortable disassembling and servicing their RTK Facet. The open source hardware design helps make it possible to understand the unit and carry ou...

SKU: SF-SPX-24673 · MPN: SPX-24673

This replacement housing kit provides the enclosure and small parts needed to repair an RTK Facet unit. It is intended for users who need to replace a damaged housing and are comfortable following the device disassembly and repair process.The kit includes the main enclosure, battery protection fo...

SKU: SF-SPX-24707 · MPN: SPX-24707

This black silicone protective sock stretches over a SparkFun RTK Facet or RTK Facet L-Band to help restore a damaged or worn unit during repair.It is intended as a replacement part for users maintaining their own RTK hardware. The open-source hardware design makes it easier to disassemble, under...

SKU: SF-PRT-18246 · MPN: PRT-18246

Keep your high-precision GNSS gear organised and better protected in the field with this RTK kit carrying case. It is designed for transporting an RTK receiver and key accessories between survey, mapping, robotics, and positioning jobs.The interior has custom moulded slots for an RTK receiver, a ...

SKU: SF-GPS-26916 · MPN: GPS-26916

This compact high-precision positioning board combines a Quectel LG290P GNSS RTK receiver with an Espressif ESP32-PICO-MINI-02 MCU module. It runs SparkFun’s RTK Everywhere firmware, letting it operate as a base station or rover for precision navigation projects.The ESP32 adds WiFi, Bluetooth® an...

SKU: SF-GPS-25662 · MPN: GPS-25662

Built for field surveying, this heavy-duty RTK unit combines a multi-band GNSS receiver, internal antenna, battery, Bluetooth, WiFi and a 915MHz LoRa radio in a rugged enclosed design. It is intended to make Base/Rover setup straightforward while handling rough use across varied environments.Gali...

SKU: DF-KIT0044

This is a DFRobot designed black rubber wheel kit. The custom-designed kit contains two 136mm rubber tires tested over 6 indoor conditions,packed with shaft couplings, two M8 screws and 2 washers. Designed to fit on DFRobot HCR(Home Care Robot) platforms and other indoor mobile robots, the ...

SKU: DF-FIT0003

This wheel is used in our most popular A4WD Mobile Platform and 2WD Arduino Mobile Robot Platform. Mounted directly on micro gear motors. Sold in pair. SPECIFICATIONS Outer Diameter: 65mm(2.6'') Wheel Width:26 mm(1'') Hub:6mm(0.2'') DOCUMENTS Gool...

SKU: DF-KIT0085

This is a quality pack for indoor robots especially our Home Care Robot platform, comes with 12V Low noise DC Motor 146RPM, Encoder and Rubber Wheel 136x24mm (Pair). 12V Low noise DC Motor 146RPM w/Encoder One of our favourite customized high quality DC motor. Low noise, high torque ou...

SKU: LB-LS3917

4 Wheel Set Get your next robotics project in motion with the 4 Wheel Set—an essential component for any small robot or moving platform. Designed with both form and function in mind, this set of four wheels is perfect for compact, lightweight designs, providing smooth and reliable performance ac...

SKU: AF-3424

This chrome-plated rugged metal pushbutton features a built-in RGB LED ring light and a latching on/off mechanism. Press once to latch on, press again to release — unlike momentary buttons, it stays in position. Simply drill a 22mm hole into any panel up to 6mm (1/4") thick and secure with the in...

SKU: AF-915

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surroun...

SKU: AF-916

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, surroun...

SKU: AF-917

These chrome-plated metal buttons are rugged and look real good while doing it! Simply drill a 16mm hole into any material up to 1/2" thick and you can fit these in place, there's even a rubber gasket to keep water out of the enclosure. On the front of the button is a flat metal actuator, su...