All Products

SKU: AF-1602

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has a very nice feature that makes it stand out for us: it will light up the 8 onboa...

SKU: DF-SEN0348

This capacitive fingerprint sensor supports fingerprint capture, image processing, fingerprint storage, fingerprint comparison, and so on. Taking ID809 high-performance processor and semiconductor fingerprint sensor as the core, the sensor adopts built-in IDfinger6.0 algorithm, which can complete...

SKU: DF-SEN0507

Different from our previous liquid level sensors, this capacitive liquid sensor can be used to detect high-viscosity and low-corrosive liquids, such as glue, lubricating oil, grease, ink, engine oil, powder and other special materials. The sensitivity of the sensor can be adjusted by the knob (cl...

SKU: DF-SEN0509

This capacitive pipeline liquid level sensor of high sensitivity is suitable for non-metallic pipes with a diameter of 6mm. The sensor outputs digital high/low level(low when liquid detected) and adopts 3-pin DuPont connector, which can be widely used in beverage machines, small water pipe level ...

SKU: DF-SEN0447

A capacitive proximity sensor with an adjustable detection range of 1–10 mm, capable of detecting both metallic and non-metallic objects. Unlike inductive sensors that only respond to metals, this capacitive sensor detects anything with sufficient dielectric properties — including plastics, wood,...

SKU: DF-DFR0129

A capacitive touch sensor kit for Arduino based on the MPR121 touch controller. Includes three interchangeable touch pads — a scroll wheel, a keypad with backlight support, and a grid pad for gesture and pattern recognition. The MPR121 provides sensitive capacitive detection over an I²C interface...

SKU: LB-LR0214-47

This is a touch sensor for Arduino.   This sensor is a toggle output type: touch-on then touch-off. Onboard TTP223 touch capacitive touch sensor IC.  With an on-board-level status indicator. Working voltage: 2.0V-5.5V PCB board size: 29 (mm) x16 (mm)

SKU: EC-AS00121CTH

This Capacitive Touch Shield has 9 build-on capacitive touchpads, and the other 3 electrodes for further usage. With this shield, you can have a total of 12 touch-sensitive buttons. This Shield uses the MPR121 which is a great way to build simple capacitive touch interfaces using the I2C communic...

SKU: SF-COM-08375

This is a very common 0.1uF capacitor. Used on all sorts of applications to decouple ICs from power supplies. 0.1" spaced leads make this a perfect candidate for breadboarding and perf boarding. Rated at 50V. If you need a bunch of these, you can get good bulk discounts on Digikey, part # : 3...

SKU: SF-COM-08571

This is a very common 22pF capacitor. Used with crystals for loading purposes. 0.1" spaced leads make this a perfect candidate for breadboarding and perf boarding. Rated at 200V.Documents:Crystal Oscillator LectureSold in single pieces

SKU: SF-TOL-14852 · MPN: TOL-14852

This three pack of Carbide 3D ball mills is made for precision 3D machining and fabrication, especially where you need to cut complex, organic surfaces.Each cutter is made from solid carbide for long-lasting use, with a small ball profile suited to fine detail work on compatible CNC machines.The ...

SKU: SF-TOL-14853 · MPN: TOL-14853

This three pack of Carbide 3D flat mills is suited to fabricating flat or prismatic surfaces where small, precise cuts are needed.Each cutter has a 0.0312 inch cutting diameter, making the set useful for precision 3D machining and fabrication work.The cutters are made from solid carbide to help p...

SKU: SF-TOL-14854 · MPN: TOL-14854

This two pack of Carbide 3D flat mills is made for milling flat or prismatic surfaces, making it useful for specialised 3D machining and fabrication work.Each cutter has a 0.25 inch cutting diameter, a 0.25 inch shank diameter and a 0.75 inch cutting length. The cutters are made from solid carbid...

SKU: SF-TOL-14856 · MPN: TOL-14856

This two-pack of Carbide 3D ZrN coated flat mills is made for precise CNC machining and fabrication, especially when working with aluminium. Each cutter has a 0.25 inch cutting diameter and matching 0.25 inch shank diameter, making it a straightforward fit for compatible CNC spindles and collets....

SKU: SF-TOL-14855 · MPN: TOL-14855

This two pack of Carbide 3D ball mills is made for milling curved surfaces and other specialised 3D machining jobs.Each cutter has a 0.25 inch cutting diameter, a matching 0.25 inch shank diameter, and a 0.75 inch cutting length, making it suitable for compatible CNC routers and mills.The cutters...

SKU: SF-TOL-25937 · MPN: TOL-25937

This wood surfacing cutter is made for CNC work where you want to flatten a wasteboard or put a clean finish on end grain timber projects. Its razor-sharp, indexable carbide tips are suited to making light work of lumber on compatible machines.Each bit comes with 4 indexable inserts, so the cutti...

SKU: SF-TOL-25938 · MPN: TOL-25938

The McFly #603E is an 8mm shank surfacing cutter from Carbide 3D, made for quickly flattening timber on compatible Shapeoko machines. Its razor-sharp, indexable carbide tips are well suited to surfacing a wasteboard or finishing end grain cutting boards.Each bit comes with 4 indexable inserts, so...

SKU: SF-TOL-14859 · MPN: TOL-14859

This two pack of V-bit mills from Carbide 3D is made for engraving intricate patterns, fine details, and precision 3D machining jobs on a compatible CNC machine.Each cutter is made from solid carbide for long-lasting use, with a 0.5 inch cutting diameter, 0.25 inch shank, and 60º cutting angle.If...

SKU: SF-TOL-14858 · MPN: TOL-14858

This two pack of Carbide 3D V-Bit mills is made for engraving intricate patterns and fine details. With a 90° cutting angle, these cutters are well suited to precision 3D machining and fabrication work.Each cutter is made from solid carbide for long-lasting use, with a 0.5 inch cutting diameter a...

SKU: SF-TOL-14857 · MPN: TOL-14857

This two pack of Carbide 3D flat mills is made for precision 3D machining and fabrication, especially when working with aluminium. Each cutter has a 0.125 inch cutting diameter and matching 0.125 inch shank diameter for use with compatible CNC machines and tool holders.The cutters are coated with...