SparkFun
Triple Output LED RGB - SMD
This is the very popular RGB combo but in SMD form. These units have four pads with a common anode configuration. Use this one LED for three status indicator...
This is the very popular RGB combo but in SMD form. These units have four pads with a common anode configuration. Use this one LED for three status indicators or pulse width modulate all three and get mixed colors! Simple breakout board available below.
Iv (Typical):
- Red: 81mcd
- Green: 130mcd
- Blue: 54mcd
Vf (Typical):
- Red: 2.0V
- Green: 3.5V
- Blue: 3.5V
Wavelength (λD - nm):
- Red: 615nm
- Green: 530nm
- Blue: 470nm
Documents:
Jargon buster
Plain-language definitions for the technical terms used above.
- breakout
- A breakout is a small circuit board that makes a tiny or hard-to-solder component easier to connect to with standard pins. It matters because this OLED module can be wired into a microcontroller project without needing to solder directly to the display’s fine contacts.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
- RGB
- Short for red, green and blue, usually referring to an LED that can mix those three colours. It matters because controlling an RGB LED teaches how separate outputs combine to create different colours.
- Torque
- A twisting force that causes something to rotate, usually measured in newton-metres or kilogram-centimetres. It matters when choosing motors, servos, gears, and tools because higher torque is needed to lift heavier loads, turn larger wheels, or move mechanisms without stalling.
Find this product in
Brands
Triple Output RGB LED SMD Datasheet
Datasheet · 3.0 MB · Click any page to view full size
Supplier page — sparkfun.com
Supplier Description · 683.4 KB · Click any page to view full size
Related Tutorials
Free guides on learn.littlebird.com.au
