Adafruit
LM3671 3.3V Buck Converter Breakout - 3.3V Output 600mA Max
·
Your power supply problems just got SUPER SOLVED! This 3.3V Buck Converter Breakout board is great for supplying power to low vol...
Get notified when back in stock
Your power supply problems just got SUPER SOLVED! This 3.3V Buck Converter Breakout board is great for supplying power to low voltage circuits from a single Li-Ion cell battery or USB power. This chip provides up to 600-mA load current across the entire input voltage range of 3.5 to 5.5V. Great for your portable project, we made this "pin compatible" with the LM1117-3.3V TO-220 chip so you can swap it in for better performance (90-95% efficiency!) There's also an ENable pin, tie it low to shut down the output completely.
There's a 2-MHz fixed-frequency in PWM mode and PFM mode extends the battery life by reducing the current during light load or standby operation.
Comes with a fully assembled and tested breakout board. We also include header to plug it into a breadboard.
Find this product in
Power & Batteries
Related Tutorials
Free step-by-step guides
You might also like
Customers who bought this also bought
MPM3610 5V Buck Converter Breakout - 21V In 5V Out at 1.2A
$11.95
Raspberry Pi Pico Clear Acrylic Case
$4.65
ESP32-S3 Round AMOLED Touch Display Board - 466x466, Dual-Core, Dual Mic, QSPI
$56.65
Gravity: UV Index Sensor (240-370nm, UVA, UVB, UVC)
$16.50
Adafruit bq25185 USB / DC / Solar Lithium Ion/Polymer charger
$14.05
ESP32-S3-Zero Mini Development Board – Dual-Core 240MHz, Wi-Fi & Bluetooth 5, 4MB or 8MB Flash, Headers Optional
$9.00 – $13.65
Waterproof DS18B20 Temperature Probe 1M with XH2.54mm Connector
$4.75
Gravity: Analog Waterproof Capacitive Soil Moisture Sensor
$24.85
Jargon buster
Plain-language definitions for the technical terms in the product description.
- breakout
- A breakout board carries a small or fine-pitched component and brings its connections out to standard, breadboard- and header-friendly pins. Describing a part as a breakout means it can be wired into a project without soldering directly to the component's tiny contacts.
- Buck converter
- A power circuit that reduces a higher DC voltage to a lower DC voltage. It is useful when your supply voltage is too high for a module or microcontroller and you want less heat and better efficiency than a simple linear regulator.
- PWM
- Pulse Width Modulation is a way for a digital pin to simulate variable output power by switching on and off very quickly. It matters for controlling things like LED brightness, motor speed, or servo-style signals from a microcontroller pin.