DFRobot
LilyPad Buzzer
All Products
E-Textiles
New Arrivals
Wearable Tech & E-textiles
Brands and Manufacturers
DFRobot
Sewable LEDs
Audio & Video
Little Bird Electronics
Sound & Audio
Speakers & Buzzers
$17.10
|
In stock at supplier
This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusively loud.
LilyPad is a wearable e-textile technology developed by Leah Buechley and cooperatively designed by Leah and SparkFun. Each LilyPad was creatively designed to have large connecting pads to allow them to be sewn into clothing. Various input, output, power, and sensor boards are available. They're even washable!
This is an inductive buzzer meaning that is will act as a short to ground if you are not actively driving it. We recommend you put both I/O pins to low (0V) when the buzzer is not used. Also, it's come to our attention that washing these buzzers will damage them.So please be careful.
Note:Avoid washing any portion of your project that contains one of these buzzers.
SPECIFICATIONS
- 20mm (0.79") outer diameter
- Thin 0.8mm (0.031") PCB
DOCUMENTS
SHIPPING LIST
- LilyPad Buzzer x1
Jargon buster
Plain-language definitions for the technical terms used above.
- PCB
- A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
Find this product in
Audio & Video
Wearables & E-textiles
Supplier page — dfrobot.com
Supplier Description · 595.2 KB · Click any page to view full size
