Adafruit
Adafruit USB Type C Vertical Breakout - Downstream Connection
· MPN: ADA5993
The Adafruit USB Type C Vertical Breakout (Downstream Connection) provides easy access to all the pins on a USB-C connector in a vertical orientation, ideal ...
The Adafruit USB Type C Vertical Breakout (Downstream Connection) provides easy access to all the pins on a USB-C connector in a vertical orientation, ideal for breadboard use and enclosure mounting. Two 5.1K resistors on the CC pins signal the upstream host to provide 5V at up to 1.5A, mimicking classic USB 2.0 downstream behaviour.
The vertical design includes two identical breakout strips on either side so the board sits flat on a breadboard, plus four mounting holes for enclosure attachment. For most projects, simply connect VBUS to your 5V input, GND to ground, and D+/D- as expected.
Key Features
- Vertical USB Type-C Connector – Stands upright for easy breadboard and enclosure use
- Downstream Configuration – Pre-configured with 5.1K CC resistors for device/sink mode
- All Pins Broken Out – Access to VBUS, GND, D+, D-, CC, and SBU pins
- Dual Breakout Strips – Identical pin access on both sides for stable breadboard mounting
- Four Mounting Holes – Secure attachment to enclosures and panels
- USB 2.0 Compatible – Drop-in replacement for older Mini or Micro B connectors
- Up to 1.5A – CC resistor configuration requests up to 1.5A from the host
Ideal For
- Breadboard prototyping with USB-C power and data
- Enclosure-mounted USB-C ports
- Upgrading projects from Micro B or Mini B to USB-C
- USB-C pin analysis and learning
Package Contents
- 1× Adafruit USB Type C Vertical Breakout - Downstream Connection
Resources
Jargon buster
Plain-language definitions for the technical terms used above.
- breakout
- A breakout is a small circuit board that makes a tiny or hard-to-solder component easier to connect to with standard pins. It matters because this OLED module can be wired into a microcontroller project without needing to solder directly to the display’s fine contacts.
- USB Type-C
- A reversible USB connector used for power and data on many modern devices. On this kit it indicates an alternate 5V power input, which may be useful for setup or charging without the solar panel.
- USB-C
- A modern reversible USB connector used for power and data connections. On this product it matters because it can connect directly to a computer as well as to a microcontroller project.
- VBUS
- A label often used for the main bus or supply voltage being measured or distributed on a board. Knowing what VBUS refers to helps you wire the monitor to the correct point in the circuit, especially for high-side measurements.
Find this product in
Brands
Prototyping & Wiring
00001953a
Datasheet · 486.2 KB · Click any page to view full size
Related Tutorials
Free guides on learn.littlebird.com.au
