AI agents & screen readers: for a machine-readable, text-only catalogue, start at /llms.txt. Products are available as Markdown (/products.md, /products/{handle}.md) and JSON (/products.json, /products/{handle}.json).
Store

Adafruit

·

$35.69 |
Out of stock
No reviews yet

Generate multiple clock frequencies from one compact breakout. The Si5351C uses a precision 25 MHz temperature-compensated crystal reference, internal PLLs a...

Get notified when back in stock

Qty
Estimated Delivery
Arrives
Disclaimer
View Markdown
Secure checkout

Generate multiple clock frequencies from one compact breakout. The Si5351C uses a precision 25 MHz temperature-compensated crystal reference, internal PLLs and dividers to produce eight independently configurable outputs. CLK0–CLK5 cover 2.5 kHz to 200 MHz.

Configure the clocks over I2C using the onboard reference or an external clock input. Outputs are available on breadboard-friendly header connections, while four alternating outputs can take optional edge-launch SMA connectors for RF work. The SMA connectors are sold separately.

STEMMA QT connectors on both sides support solderless connections and daisy-chaining with compatible STEMMA QT or SparkFun Qwiic devices. An onboard 3.3 V regulator and level shifters support 3 V or 5 V power and logic. Adafruit provides a tutorial, an Arduino library and code for CircuitPython/Python devices with I2C support.

Specifications:

  • Clock generator: Si5351C with eight independent outputs
  • Reference clock: Precision temperature-compensated (TCXO) 25 MHz crystal
  • Frequency generation: Up to eight non-integer-related frequencies; CLK0–CLK5 cover 2.5 kHz to 200 MHz
  • Configuration interface: I2C user-definable configuration
  • Frequency synthesis: Exact frequency synthesis at each output (0 ppm error)
  • VCXO: Highly linear
  • Optional clock input: CLKIN
  • Output period jitter: < 70 ps pp, typ
  • Spread spectrum: Configurable, selectable at each output
  • Phase offset: Supports static phase offset
  • Rise/fall time: Programmable control
  • Frequency changes: Glitchless
  • Power supply rejection: Excellent PSRR eliminates external power supply filtering
  • Power consumption: Very low
  • PCIe compatibility: PCIe Gen 1 compatible
  • Output swing: Supports HCSL-compatible swing
  • Default output level: 3 Vpp; lower levels configurable via VDDA/B/C/D breakout pads
  • TCXO tolerance after 2 times reflow, referenced to nominal frequency: ±1.5 ppm
  • TCXO stability vs temperature, TA=-30~+85C, referenced to frequency (TA=+25C): ±0.5 ppm
  • TCXO stability vs supply voltage, VCC=+3.3V±5%: ±0.2 ppm
  • TCXO stability vs load variation, LOAD_R//C=(10kΩ//10pF)±10%: ±0.2 ppm
  • TCXO ageing, TA=Room ambient: ±1.0 ppm/year
  • Dimensions: 46.0mm x 17.7mm x 4.8mm / 1.8" x 0.7" x 0.2"
  • Design resources: Datasheets, PCB CAD files and Fritzing objects available in Adafruit's tutorial

Find this product in

Si5351 Datasheet

Datasheet · 1.5 MB · Click any page to view full size

Download PDF

Si5351 Clock Generator Breakout Guide

User Guide · 3.0 MB · Click any page to view full size

Download PDF

Si5351 Datasheet

Datasheet · 1.5 MB · Click any page to view full size

Download PDF

Source Code

Open-source libraries, firmware & example projects for this product

Stella
Stella Expert

Ask me anything about this product

Jargon buster

Plain-language definitions for the technical terms in the product description.

breakout
A breakout board carries a small or fine-pitched component and brings its connections out to standard, breadboard- and header-friendly pins. Describing a part as a breakout means it can be wired into a project without soldering directly to the component's tiny contacts.
CircuitPython
A beginner-friendly version of Python designed to run directly on microcontroller boards. If a product supports CircuitPython, you can often program it by copying code files onto the board rather than setting up a more complex toolchain.
I2C
I2C is a two-wire communication bus used by many sensors and small modules. It matters because several I2C devices can share the same two wires, but each device needs a compatible address and your controller must support I2C.
PCB
A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.
ppm
ppm means parts per million, a common way to express very small gas concentrations in air. For CO₂ sensors, the ppm range tells you what levels the sensor can measure, such as normal indoor air through to poorly ventilated spaces.
Qwiic
Qwiic is a plug-in connector system for I2C devices that uses small 4-pin cables, so you can connect compatible sensors without soldering. It matters because your controller or adapter also needs Qwiic, or you will need a cable or breakout to wire it up.
RF
RF means radio frequency, referring to signals used for wireless communication and other high-frequency electronics. A low-noise, stable power supply is important for RF circuits because power noise can affect signal quality and measurements.
SMA
SMA is a small threaded coaxial (RF) connector widely used to attach antennas and other radio-frequency cables. A device with SMA antenna ports needs antennas or pigtails with matching SMA connectors, or a suitable adapter, to connect to them.
STEMMA QT
A small plug-in connector system for I2C boards that lets you connect compatible sensors and controllers without soldering. It matters because it can make wiring faster and less error-prone, especially when adding several small modules to a project.
Tolerance
Tolerance tells you how far the real resistance value may be from the printed value. A 1% resistor is useful when a circuit needs more predictable behaviour than a looser 5% or 10% part.
VCC
VCC is the positive power-supply connection on a chip or module. Connecting it to the correct supply voltage is needed for the part to power on and helps avoid damaging the electronics.
Maddy, co-founder of Little Bird

Need help? We're here for you!

Hi, I'm Maddy. My team and I are ready to help with your order or any questions.