Name: Adafruit NeoPixel Digital RGB LED Strip - Black 60 LED [BLACK] 3 meters
Availability: Discontinued

A mid-density NeoPixel strip with 60 individually addressable RGB LEDs per metre on a flexible black PCB, supplied in a 3-metre length (180 LEDs total). Each pixel offers full 24-bit colour control with only a single data pin required. Also available in 1-metre and 2-metre lengths.

The strip is 12.5 mm wide (10 mm without casing) and comes with weatherproof sheathing. Cut lines are spaced every 1.7 cm (one LED each) for precise custom lengths. Sold by the metre from 4-metre reels.

Key Features

60 RGB LEDs per Metre – Double the density of 30 LED/m strips for smoother colour transitions
3-Metre Length – 180 LEDs total, ideal for medium to large installations
Individually Addressable – Set each LED's colour independently with 8-bit PWM per channel (24-bit colour)
Single-Pin Control – Only one digital output pin required; built-in PWM controller in each LED maintains colour without continuous data
Black Flex PCB – Blends into dark enclosures and provides high contrast when LEDs are off
Weatherproof Sheathing – Included protective casing (removable if not needed)
Chainable & Cuttable – Connect strips together or cut every 1.7 cm with wire cutters

Power Requirements

Voltage – 5V DC (do not exceed 6V or the strip will be damaged)
Max Current – ~10.5A at full white (54W for 3 metres)
Typical Current – Colourful patterns typically draw 1/3 to 1/2 of maximum
Recommended Supply – A 5V 10A power supply is recommended; inject power at both ends for 3+ metres

Warning: You must use a 5V DC power supply to power these strips. Do not exceed 6V or you risk destroying the entire strip. For runs of 3+ metres, inject power at both ends to avoid voltage drop.

Compatibility Notes

Works with Arduino (8 MHz+), Raspberry Pi, ESP32, and other fast microcontrollers
Requires precise 100 ns timing — not compatible with interpreted platforms (Basic Stamp, NETduino) or processors slower than 8 MHz
Each LED requires 3 bytes of RAM — 180 LEDs uses 540 bytes, within Arduino Uno limits (~1,500 bytes free)
For processors without strict timing capability, consider DotStar LED strips which use SPI-based control

Ideal For

Accent and ambient lighting with smooth colour transitions
LED art installations and props
Under-cabinet and architectural lighting
Stage and event lighting

Package Contents

1× NeoPixel Digital RGB LED Strip – 60 LED/m, 3 metres, black PCB

Note: These strips come from 4-metre reels. If you order less than 4 metres, you will receive a cut piece which may or may not include a JST SM connector. If the piece comes from the end of the reel, the connector may be on the output end.

Resources

NeoPixel Uberguide – Comprehensive wiring, coding, and power guide

Adafruit NeoPixel Digital RGB LED Strip - Black 60 LED [BLACK] 3 meters