Adafruit
Adafruit JST PH LiPo Battery Connector Remover
· MPN: ADA6391
This small accessibility tool helps remove LiPoly and LiIon batteries with JST connectors from a board without tugging on the battery wires.The 3D-printed pu...
This small accessibility tool helps remove LiPoly and LiIon batteries with JST connectors from a board without tugging on the battery wires.
The 3D-printed puller slips over the JST PH connector so you can line it up with the socket and gently lift it out. It is handy for anyone who finds tiny battery plugs fiddly, wants to protect a nail set, or simply wants a little more control when disconnecting batteries.
Use it by aligning the puller with the JST connector on the board, then lifting carefully to pop the connector free.
Specifications:
- Dimensions: 2.41cm × 1.6cm × 0.9cm
- 3D Print Technology: SLA
- Material: 9600 Resin
- Product Weight: 2.6g / 0.1oz
- 3D Files: Available from the manufacturer
Jargon buster
Plain-language definitions for the technical terms used above.
- JST PH
- A small keyed plug-and-socket connector with 2 mm pin spacing, often used for low-power electronics connections. You need the correct JST PH cable, and its current rating limits how much power should be passed through it.
Find this product in
Tools & Equipment
Supplier page — adafruit.com
Supplier Description · 549.8 KB · Click any page to view full size
Resources & Downloads
Guides, code examples, and more
