200 Ohm 0.5 Watt Metal Film Resistors - Pack of 8

Jargon buster

Plain-language definitions for the technical terms used above.

Axial

Axial components have one lead coming out of each end, so they lie flat or span holes on a circuit board or breadboard. This matters when checking whether the resistor will physically fit your prototyping or through-board assembly method.

LED

A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.

PCB

A printed circuit board (PCB) is a board, usually rigid, with etched copper tracks that connect electronic components together without loose wiring. Components are mounted on the board and signals route between them through the copper layout.

through-hole

A mounting style where the component leads pass through holes in a circuit board and are soldered on the other side. Through-hole parts are often easier to handle and solder by hand, which is useful for classroom and hobby projects.

Tolerance

Tolerance tells you how far the real resistance value may be from the printed value. A 1% resistor is useful when a circuit needs more predictable behaviour than a looser 5% or 10% part.