Wireless & Connectivity

SKU: SF-WRL-13002 | Brand: SparkFun

This ANT500 is a telescopic antenna designed for operation from 75 MHz to 1 GHz with a total length that is configurable from 20 cm to 88 cm long. Each ANT500 is constructed of stainless steel and features an SMA male...

SKU: SF-CAB-10759 | Brand: SparkFun

Integrating Ethernet support into your project is a great way to relay data through a local area network and even bounce information out to the internet. Sometimes it’s hard to get power to your Ethernet devices. Woul...

SKU: AF-3320 | Brand: Adafruit

The ESP-WROOM-32 is Espressif's flagship WiFi + Bluetooth Classic + BLE module, built around the dual-core Tensilica LX6 microprocessor. It targets a wide variety of applications from low-power sensor networks to dema...

SKU: DF-DFR0373 | Brand: DFRobot

The Particle Photon is a compact WiFi development board for building connected Internet of Things (IoT) projects and products. Powered by a Broadcom BCM43362 WiFi chip and an STM32F205 ARM Cortex M3 microcontroller ru...

SKU: SF-WRL-10534 | Brand: SparkFun

A simple 434 MHz ASK RF transmitter module for creating basic one-way wireless data links. Breadboard-friendly and easy to pair with a microcontroller, this transmitter works with compatible 434 MHz receiver modules t...

SKU: SF-WRL-10532 | Brand: SparkFun

The RF Link Receiver is a simple 434 MHz wireless receiver module designed for one-way data communication with a compatible 434 MHz transmitter. It fits easily into a breadboard and pairs with microcontrollers to crea...

SKU: SF-WRL-12861 | Brand: SparkFun

This is a basic SMA (Sub-Miniature A) male to female connector cable. Each cable is 25cm (9.8") long and has a 50Ω impedance that can handle frequencies up to 17 GHz. The SMA connectors at each end are small enough...

SKU: SF-WRL-12847 | Brand: SparkFun

XBee radios are an awesome way to add wireless capability to your Arduino project and now it’s even easier with the SparkFun XBee Shield. The shield form-factor mates directly with any dev board that has an Arduino...

SKU: SF-WRL-12823 | Brand: SparkFun

This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile r...

SKU: DF-DFR0409 | Brand: DFRobot

INTRODUCTION  The Arduino Proto shield allows an Arduino board to communicate wireless using a wireless module. It is based on the Xbee modules from Digi, but can use any module with the same footprint. The ...

SKU: AF-1859 | Brand: Adafruit

This 2.4"/61mm long antenna has 2dBi of gain and 50Ω impedance so it will work fantastically with just about any 850/900/1800/1900/2100 wireless receiver/transmitter such as any Cellular or GSM/GPRS device. Anten...

SKU: SF-WRL-12569 | Brand: SparkFun

This is the XBee WiFi Module with RP-SMA connector from Digi. XBee WiFi embedded RF modules provide simple serial to IEEE 802.11 connectivity. By bridging the low-power/low-cost requirements of wireless device network...

SKU: AF-2267 | Brand: Adafruit

The Bluefruit LE Friend is your new BLE BFF! This USB-to-BLE board makes it easy to get your computer talking to your BLE enabled phone or tablet using a standard serial/UART connection. In it's simplest form, it w...

SKU: AF-2022 | Brand: Adafruit

The ACKme WiConnect Mackerel Evaluation Board (AMW004-E03) provides a quick way to evaluate and develop with the WiConnect WiFi platform using the surface-mount AMW004 Wallaby module. Designed by the team behind Rovin...

SKU: DF-FIT0505 | Brand: DFRobot

A 2.4 GHz omni-directional antenna with 6 dBi gain and an IPEX MHF1 connector, providing strong WiFi signal reception and transmission. The 15 cm cable makes it easy to position the antenna away from the board for opt...

SKU: SF-WIG-09555 | Brand: SparkFun

This board allows you to interface with your car’s OBD-II bus. It provides you a serial interface using the ELM327 command set and supports all major OBD-II standards such as CAN and JBUS. The board also provides a fo...

SKU: SF-WRL-21293 | Brand: SparkFun

Build low-power 2.4GHz Bluetooth beacon prototypes with this compact breakout based on the InPlay IN100 NanoBeacon. It is designed for wireless sensor monitoring, asset tracking, retail beacons and DIY beacon tags for...

SKU: SF-DD-27675 | Brand: SparkFun

This Thing Plus board is a wireless development platform built around the Raspberry Pi Foundation RP2350 microcontroller. It combines the familiar Thing Plus form factor with Qwiic expansion, a µSD card socket, USB-C,...

SKU: SF-WRL-25134 | Brand: SparkFun

Build connected sensor nodes, data loggers and battery-powered IoT projects around Raspberry Pi’s RP2350 microcontroller. This Thing Plus board adds wireless connectivity, extra memory and the familiar Feather-compati...

SKU: SF-WRL-30414 | Brand: SparkFun

Turn a wired UART link into a dependable short-range Bluetooth® serial connection for microcontrollers, computers and mobile devices. It pairs, connects and passes data between TX and RX lines, buffering serial stream...