Wireless & Connectivity

SKU: LB-LR0307 | Brand: Little Bird

Upgraded Version ESP-01,all Flash are upgraded to 1M byte.Also support Cloud service remote transmission.This Upgraded Version module are fully supports the previous firmware The latest firmware version 1.0.1, the ...

SKU: DF-DFR1096 | Brand: DFRobot

The Arduino Nano ESP32 brings the ESP32-S3 (u-blox NORA-W106 module) into the familiar Nano form factor with a USB-C connector. It supports both Arduino and MicroPython programming, making it an accessible entry point...

SKU: DF-DFR1056 | Brand: DFRobot

Note: The Arduino GIGA R1 WiFi Development Board is available for pre-order and is expected to be shipped in late September. This Arduino GIGA R1 WiFi Development Board measures only 101 x 53mm and has the same for...

SKU: SF-WRL-24113 | Brand: SparkFun

The SparkFun BlueSMiRF v2 is a wireless Bluetooth® serial link. These boards work as a wireless serial UART pipe and are a great wireless replacement for serial cables. Simply pair, connect, and transmit serial data b...

SKU: SF-WRL-23287 | Brand: SparkFun

The SparkFun BlueSMiRF v2 with headers is a wireless Bluetooth® serial link. These boards work as a wireless serial UART pipe and are a great wireless replacement for serial cables. Simply pair, connect, and transmit ...

SKU: SF-WRL-20854 | Brand: SparkFun

The SparkFun NINA-B306 Thing Plus offers a unique combination development platform in the Thing Plus form factor featuring the NINA-B306 from u-blox™, the ISM330DHCX 6DoF IMU from STMicroelectronics™ and the BME280...

SKU: AF-3653 | Brand: Adafruit

Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption w...

SKU: AF-3654 | Brand: Adafruit

Add WiFi connectivity to your Arduino-compatible board with the Adafruit WINC1500 WiFi Shield, featuring the FCC-certified ATWINC1500 module from Atmel. This 802.11b/g/n shield supports WEP, WPA, and WPA2 encryption w...

SKU: SF-WRL-13287 | Brand: SparkFun

The SparkFun ESP8266 WiFi Shield is an Arduino compatible shield for the ESP8266 WiFi SoC – a leading platform for Internet of Things (IoT) or WiFi-related projects. There are a variety of designs based around the ...

SKU: DF-DFR1083 | Brand: DFRobot

##Introduction The Arduino Portenta C33 is a streamlined module that offers the high performance of the Arduino Portenta family at a lower price point, thanks to optimizations and streamlined features. Ideal to develo...

SKU: DF-DFR1057 | Brand: DFRobot

##Introduction Arduino Opta, specially designed for PLC engineers, is a secure, easy-to-use micro PLC (Programmable Logic Controller) with industrial IoT capabilities. Opta is equipped with frequently used networks an...

SKU: DF-DFR1033 | Brand: DFRobot

##Introduction Portenta H7 Lite Connected is a high-performance MCU development board with integrated Wi-Fi and Bluetooth connectivity, and is a product in the Arduino Portenta H7 series. It uses the same STM32H7 MCU ...

SKU: SF-WRL-21637 | Brand: SparkFun

The SparkFun Thing Plus - NORA-W306 is a Feather form-factor development board equipped with the u-blox NORA-W306 module. The module contains a Realtek RTL8720DF, which has an integrated single-chip low-power dual-ban...

SKU: SF-WRL-22627 | Brand: SparkFun

XBee RR 802.15.4 RF Modules are embedded solutions providing wireless end-point connectivity to devices. These devices use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking....

SKU: EC-CRT12036K | Brand: Elecrow

The IOT kit will supply you with Crowtail modules, which inclueds ESP8266 NodeMCU, OLED, RGB LED, Moisture sensor, Temperature & Humidity sensor, Flame sensor, Buzzer and Relay. This kit comes from our Philippine cust...

SKU: AF-4363 | Brand: Adafruit

Give your ItsyBitsy project WiFi connectivity with the Adafruit AirLift Bitsy Add-On. This compact daughterboard uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL ...

SKU: AF-4264 | Brand: Adafruit

Give your Feather project WiFi connectivity with the Adafruit AirLift FeatherWing. This add-on uses an ESP32 as a WiFi co-processor, handling all the heavy lifting of network connections and TLS/SSL encryption so your...

SKU: DF-TEL0026 | Brand: DFRobot

A Bluetooth 2.0 serial module for Arduino, featuring the CSR BC417143 chip with a double-board design for electrostatic protection. Provides transparent serial data communication over Bluetooth with a configurable bau...

SKU: SF-DEV-14285 | Brand: SparkFun

The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast and easy as possible. The heart of the Wireless Motor Driver Shield i...

SKU: AF-2999 | Brand: Adafruit

The Adafruit ATWINC1500 WiFi Breakout adds 802.11b/g/n WiFi connectivity to your Arduino or other microcontroller project over SPI. Built around the Microchip ATWINC1500 module, this FCC-certified breakout delivers re...