Wireless & Connectivity

SKU: DF-DFR0654 | Brand: DFRobot

The FireBeetle Board ESP32-E is a compact IoT development board based on the ESP-WROOM-32E module with a Tensilica LX6 dual-core processor running at 240MHz. It supports Wi-Fi 802.11 b/g/n and Bluetooth 4.2 (BR/EDR + ...

SKU: DF-DFR1096 | Brand: DFRobot

The Arduino Nano ESP32 brings the ESP32-S3 (u-blox NORA-W106 module) into the familiar Nano form factor with a USB-C connector. It supports both Arduino and MicroPython programming, making it an accessible entry point...

SKU: AF-3269 | Brand: Adafruit

The Espressif ESP32 Development Board breaks out all ESP32 module pins to standard 2.54 mm (0.1 in) headers, with a CP2102 USB-to-serial adapter for programming, boot and reset buttons, and an onboard 3.3 V regulator....

SKU: DF-DFR1075 | Brand: DFRobot

The FireBeetle 2 ESP32-C6 is a low-power IoT development board built around a 160MHz RISC-V single-core processor. It supports Wi-Fi 6 (802.11ax), Bluetooth 5, Zigbee 3.0, Thread 1.3, and the Matter smart home standar...

SKU: EC-ARS01119B | Brand: Elecrow

ESP-WROOM-32 is a powerful, generic Wi-Fi+BT+BLE MCU module that targets a wide variety of applications, ranging from low-power sensor networks to the most demanding tasks, such as voice encoding, music streamin...

SKU: DF-DFR0625 | Brand: DFRobot

ESP32-PICO-KIT is a mini IoT development board with functionalities of WiFi and Bluetooth. With a size of 52x 20.3x10mm, the module integrates a 4 MB SPI flash, and a USB-UART Bridge circuit, allowing the developer...

SKU: DF-DFR1139 | Brand: DFRobot

##Introduction The FireBeetle 2 ESP32-E (N16R2) IoT development board equipped with 16M Flash and 2M PSRAM. It is designed to provide superior performance for applications such as the LVGL graphics library for interfa...

SKU: AF-5344 | Brand: Adafruit

ESP32-WROOM-DA (the DA is for Dual Antenna) is a powerful Wi-Fi + Bluetooth Classic + Bluetooth LE MCU module, with two complementary PCB antennas in different directions. Packed with 8 MB of internal QSPI Flash, it ...

SKU: SF-WRL-28434 | Brand: SparkFun

The SparkFun IoT RedBoard combines the powerful ESP32-D0WDQ6 microcontroller with MicroPython pre-installed, letting you start coding IoT projects right out of the box. No need for complex toolchains – just connect vi...

SKU: AF-5750 | Brand: Adafruit

TinyPICO is the world’s smallest, fully-featured ESP32 development board, designed to unlock the power of the ESP32’s dual-core 240MHz and internet connectivity, in a package smaller than your thumb! Please note: Thi...

SKU: AF-5778 | Brand: Adafruit

The Adafruit Matrix Portal S3 is the next-generation plug-and-play controller for HUB-75 RGB LED matrix panels. Powered by the ESP32-S3 with built-in WiFi and Bluetooth LE, it plugs directly into the back of any compa...

SKU: PI-PYC001 | Brand: Pimoroni

The Pycom WiPy 2.0 is a compact, MicroPython-enabled IoT development platform built on the Espressif ESP32 chipset. With dual processors, 1 km WiFi range, and Bluetooth Low Energy, it delivers enterprise-grade wireles...

SKU: PI-PYC002 | Brand: Pimoroni

The SiPy from Pycom is a multi-network IoT development board combining Sigfox, WiFi, and Bluetooth (classic + BLE) on a single ESP32-powered module. Programmable with MicroPython and the Pymakr IDE, it enables rapid I...

SKU: PI-PYC012 | Brand: Pimoroni

With WiFi, BLE and cellular LTE-CAT M1/NB1, the GPy is the latest Pycom triple-bearer MicroPython enabled micro controller on the market today – the perfect enterprise grade IoT platform for your connected Things. Cre...

SKU: PI-PYC003 | Brand: Pimoroni

The Pycom LoPy is a compact, triple-network MicroPython development board combining LoRa, WiFi, and Bluetooth on the Espressif ESP32 chipset. It can function as both a LoRa node (up to 40 km range) and a Nano LoRa Gat...