Wearables & E-textiles

SKU: PI-TEK002 | Brand: Pimoroni

A tiny, vibrating motor, easily attachable to paper or fabric! Just connect 3-5V across it, polarity doesn't matter, and it'll BUUUUZZZZZZ!!! The voltage (and hence current) supplied from LIR2032 recharge...

SKU: LB-LR0309-45 | Brand: Little Bird

A 1-metre length of soft conductive sewing thread made from stainless steel, designed for wearable electronics projects. Use it to sew electrical connections between LilyPad components, sewable LEDs, and batteries — r...

SKU: AF-3781 | Brand: Adafruit

You're at New York's hottest cyberpunk club is Near Field Commune(ication), and it's got everything, Collin's wondrous, mind-blowing, heart-stirring Pulse Room, and more! And you are dressed to the cyber-...

SKU: AF-2852 | Brand: Adafruit

What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixel rings now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Round and round and round they go!   This is...

SKU: AF-2853 | Brand: Adafruit

What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixel rings now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Round and round and round they go!   This is...

SKU: AF-2851 | Brand: Adafruit

What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixel rings now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Round and round and round they go!   This is...

SKU: AF-1093 | Brand: Adafruit

Pulse Sensor Amped is a greatly improved version of the original Pulse Sensor, a plug-and-play heart-rate sensor for Arduino and Arduino compatibles. It can be used by students, artists, athletes, makers, and game & m...

SKU: AF-1246 | Brand: Adafruit

Add light-reactive sensing to your wearable Flora project with this high precision Lux sensor. The TSL2561 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Comp...

SKU: LB-LR0335-Y | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant yellow when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow simil...

SKU: AF-1324 | Brand: Adafruit

Conductive hook & loop tape is just like the stuff you've seen on jackets, clothes, shoes, and bags, but is coated with silver to make it fully conductive. Originally this was designed to the manufacture of static-...

SKU: AF-588 | Brand: Adafruit

A starter pack containing 2.5 metres of high-brightness pink EL (electroluminescent) wire with a pocket inverter and soldering supplies. The EL wire comes pre-cut and soldered, ready to connect to the included battery...

SKU: AF-1481 | Brand: Adafruit

This is hot! Literally! Apply 5-12VDC and the stainless steel fibers in this heating fabric will warm up, creating a little heating pad. On one hand, it's just a gigantic resistor. On the other hand, it's flexible,...

SKU: LB-LR0281-5-G | Brand: Little Bird

A 5-metre length of green electroluminescent (EL) wire with a battery-powered inverter included. EL wire is a flexible, phosphor-coated wire that produces a bright, even glow along its entire length — similar in appea...

SKU: AF-3670 | Brand: Adafruit

High-conductive heating fabrics are Literally! This non-woven fabric feels a little like felted paper but is filled with conductive material that can make the fabric emit heat when powered. Resistive heating fabrics s...

SKU: AF-1657 | Brand: Adafruit

Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA board, four sewable bright RGB pixels, a battery holder and batteries, 2-p...

SKU: AF-1870 | Brand: Adafruit

A simple sewable breakout board with a CR2032 coin cell battery holder pre-soldered on and 0.1" pitch breakout pins for easy connection. Ideal for powering very low-current projects or adding a battery backup circuit ...

SKU: AF-1839 | Brand: Adafruit

Making Wearables with an Arduino-Compatible Electronics PlatformThis book introduces readers to building wearable electronics projects using Adafruit's tiny FLORA board: at 4.4 grams, and only 1.75 inches in diameter...

SKU: DF-SEN0086 | Brand: DFRobot

A simple flex sensor 2.2" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power G...

SKU: DF-DFR0185-LB | Brand: DFRobot

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to 220Vac, at a very ...

SKU: SF-DEV-08777 | Brand: SparkFun

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to dig...