Wearables & E-textiles

SKU: SF-DEV-14346 | Brand: SparkFun

The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming, then break apart to make an interactive fabric or wearable project. Programming the ProtoSnap...

SKU: DF-FIT0229 | Brand: DFRobot

This inverter is the most common way to power EL wire because they tend to be cheap and batteries generally last a long time. 2 AA Batteries can power an 2.5m strand of EL Wire for about 8-10 hours.We recomend you us...

SKU: SF-SEN-08606 | Brand: SparkFun

A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Gl...

SKU: SF-PRT-13828 | Brand: SparkFun

A wide roll of copper tape with conductive adhesive backing. At 50.8 mm (2″) wide and 15.2 m (50 ft) long, this tape is suitable for creating low-profile traces, RF shielding, antenna construction, and paper circuit p...

SKU: SF-SEN-12969 | Brand: SparkFun

A 10-pack of disposable biomedical sensor pads (electrodes) for measuring EEG, ECG, and EMG signals. Each pad features integrated latex-free gel for strong skin adhesion and a snap connector that attaches easily to el...

SKU: AF-615 | Brand: Adafruit

This gold-eye sharps needle set is perfect for hand-sewing with conductive thread and wearable electronics parts. The pack includes 20 needles in sizes #3 to #9, giving you the right needle for any e-textiles or gener...

SKU: AF-2328 | Brand: Adafruit

Adafruit DotStar LED strips use 2-wire SPI instead of the single-wire protocol used by NeoPixels, allowing much faster data rates (up to 32 MHz) and a 20 KHz PWM refresh rate. This makes DotStars ideal for persistence...

SKU: AF-2855 | Brand: Adafruit

What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixel rings now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Round and round and round they go!   This is ...

SKU: AF-1088 | Brand: Adafruit

This conductive fiber is super interesting! It's great for felting and could also be spun into yarn if that's your thing. We tested many different fiber thicknesses for needle felting and found that this one (20um ...

SKU: AF-1126 | Brand: Adafruit

Tin-plated brass sewable snaps in a compact 5 mm diameter, ideal for wearable electronics. Solder one side to a PCB pad and sew the other to your project with conductive thread for a detachable electrical connection. ...

SKU: LB-LR0183 | Brand: Little Bird

A LilyPad-compatible microcontroller board based on the ATmega32U4, designed for e-textile and wearable electronics projects. The built-in USB communication allows the board to appear as a mouse, keyboard, or virtual ...

SKU: AF-1577 | Brand: Adafruit

We've got some awesome LED goggle tutorials, and now you want to make your own, right? So pick up a pair of NeoPixel rings and these costuming goggles and get to it!These goggles look a bit like aviator/welding gog...

SKU: AF-2239 | Brand: Adafruit

The Adafruit DotStar Digital LED Strip (60 LED/m, black flex PCB) delivers superior performance over traditional NeoPixels with its 2-wire SPI interface. Push data at up to 32 MHz clock speed with no critical timing r...

SKU: SF-DEV-09267 | Brand: SparkFun

The LilyPad Accelerometer is a three-axis accelerometer based on the Analog Devices ADXL335, designed for the LilyPad wearable e-textile system. It detects joint movement, inclination, and vibration, outputting 0–3 V ...

SKU: SF-DEV-11893 | Brand: SparkFun

The LilyPad Simple Power is a simple e-textile board that lets you connect and charge a lipo battery and switch it on or off, that’s it! We provide you with a JST connector and a slide switch, you supply the battery a...

SKU: SF-DEV-13902 | Brand: SparkFun

This is a simple pack of five White LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-t...

SKU: AF-653 | Brand: Adafruit

This sewable CR2032 battery holder makes it easy to add power to wearable electronics projects. Two small 1mm holes in the metal connection tabs are perfectly sized for a #5 or smaller needle to pass through, so you c...

SKU: SF-SEN-09673 | Brand: SparkFun

A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approxim...

SKU: WS-32769 | Brand: Waveshare

The ESP32-C6 Touch AMOLED 2.06 is a smartwatch-style development board built around the ESP32-C6 RISC-V processor. Featuring a vibrant 2.06" AMOLED touchscreen, WiFi 6, Bluetooth 5, and Zigbee connectivity, it's a com...

SKU: AF-6182 | Brand: Adafruit

A 10-wire silicone-covered ribbon cable that's extremely supple and flexible. The silicone sheathing handles temperatures up to 200°C and voltages up to 600 V — far beyond what PVC-covered wire can manage. Pull and se...