Wearables & E-textiles

SKU: SF-TOL-10405 | Brand: SparkFun

This sewing needle set is designed for e-textile projects, with eye sizes large enough to easily thread conductive thread. The set includes both large and small needles to suit different stitching needs — from thick f...

SKU: AF-921 | Brand: Adafruit

This blank 13.56 MHz RFID/NFC silicone bracelet contains a Mifare Classic 1K chip with 1 KB of writable EEPROM storage. The embedded chip and antenna are passively powered — no battery is needed. Simply hold the brace...

SKU: AF-1349 | Brand: Adafruit

A really tiny portable inverter for EL wire. Powers off of a single AAA battery (not included!), it can drive up to 50cm / 20 inches of our high-brightness EL wire or 10cm x 1cm long piece of EL tape for 3 hours (o...

SKU: AF-1559 | Brand: Adafruit

So, you want lots and lots of NeoPixels? And you want them for less? Not a problem! Here's a sheet of Flora NeoPixels fresh from the (reflow) oven. Cut them off as you need 'em and save a pretty penny while you're ...

SKU: AF-1656 | Brand: Adafruit

3M Z-Axis Conductive Tape (9703) bonds two conductive surfaces together while allowing current to flow through the thickness of the tape — but not along its length or width. This anisotropic conductivity is achieved b...

SKU: SF-DEV-14346 | Brand: SparkFun

The LilyPad ProtoSnap Plus is a sewable electronics prototyping board that you can use to explore circuits and programming, then break apart to make an interactive fabric or wearable project. Programming the ProtoSnap...

SKU: DF-FIT0229 | Brand: DFRobot

This inverter is the most common way to power EL wire because they tend to be cheap and batteries generally last a long time. 2 AA Batteries can power an 2.5m strand of EL Wire for about 8-10 hours.We recomend you us...

SKU: SF-SEN-08606 | Brand: SparkFun

A simple flex sensor 4.5" in length. As the sensor is flexed, the resistance across the sensor increases. Patented technology by Spectra Symbol - they claim these sensors were used in the original Nintendo Power Gl...

SKU: SF-PRT-13828 | Brand: SparkFun

A wide roll of copper tape with conductive adhesive backing. At 50.8 mm (2″) wide and 15.2 m (50 ft) long, this tape is suitable for creating low-profile traces, RF shielding, antenna construction, and paper circuit p...

SKU: SF-SEN-12969 | Brand: SparkFun

A 10-pack of disposable biomedical sensor pads (electrodes) for measuring EEG, ECG, and EMG signals. Each pad features integrated latex-free gel for strong skin adhesion and a snap connector that attaches easily to el...

SKU: AF-2855 | Brand: Adafruit

What is better than smart RGB LEDs? Smart RGB+White LEDs! These NeoPixel rings now have 4 LEDs in them (red, green, blue and white) for excellent lighting effects. Round and round and round they go!   This is ...

SKU: AF-1088 | Brand: Adafruit

This conductive fiber is super interesting! It's great for felting and could also be spun into yarn if that's your thing. We tested many different fiber thicknesses for needle felting and found that this one (20um ...

SKU: AF-1126 | Brand: Adafruit

Tin-plated brass sewable snaps in a compact 5 mm diameter, ideal for wearable electronics. Solder one side to a PCB pad and sew the other to your project with conductive thread for a detachable electrical connection. ...

SKU: AF-1285 | Brand: Adafruit

The Adafruit Beginner LED Sewing Kit has everything you need to start stitching glowing circuits with conductive thread. No soldering or microcontroller required — the included candle-flicker LEDs twinkle automaticall...

SKU: AF-1577 | Brand: Adafruit

We've got some awesome LED goggle tutorials, and now you want to make your own, right? So pick up a pair of NeoPixel rings and these costuming goggles and get to it!These goggles look a bit like aviator/welding gog...

SKU: SF-DEV-09267 | Brand: SparkFun

The LilyPad Accelerometer is a three-axis accelerometer based on the Analog Devices ADXL335, designed for the LilyPad wearable e-textile system. It detects joint movement, inclination, and vibration, outputting 0–3 V ...

SKU: SF-DEV-11893 | Brand: SparkFun

The LilyPad Simple Power is a simple e-textile board that lets you connect and charge a lipo battery and switch it on or off, that’s it! We provide you with a JST connector and a slide switch, you supply the battery a...

SKU: SF-DEV-13902 | Brand: SparkFun

This is a simple pack of five White LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-t...

SKU: AF-653 | Brand: Adafruit

This sewable CR2032 battery holder makes it easy to add power to wearable electronics projects. Two small 1mm holes in the metal connection tabs are perfectly sized for a #5 or smaller needle to pass through, so you c...

SKU: SF-SEN-09673 | Brand: SparkFun

A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approxim...