Wearables & E-textiles

SKU: SF-DEV-13814 | Brand: SparkFun

This is 12 meters of smooth conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable el...

SKU: LB-EAGLED-BUZZ | Brand: Little Bird

EagLED is Little Bird Electronics' wearable development kit. It's a complete Arduino compatible microcontroller that has LEDs, Light Sensor, Push Button and Buzzer built into a snippable board. USB Support The Ea...

SKU: LB-LR0220 | Brand: Little Bird

Light up your E-Textile projects with this set of 5 E-Textile Compatible LED modules. With a working voltage of 3V - 5V and a current of 40mA, these LEDs are perfect for adding a touch of brightness to your wearable e...

SKU: AF-3351 | Brand: Adafruit

Listen up! This 2.8" x 1.2" speaker is a great addition to any audio project where you need 4 ohm impedance and 3W or less of power. We particularly like this speaker as it is small...

SKU: AF-3960 | Brand: Adafruit

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft!  This Conductive Nylon tape goes great with our other interesting materials, such as copper tape, ITO gl...

SKU: SF-DEV-09350 | Brand: SparkFun

This is a simple slide switch for the LilyPad. Use it as a simple ON/OFF switch, or to control LEDs, buzzers, sensors, etc. The swtiches on each board are rated for 4 volts at 300mA, but will work at 5 volts with a re...

SKU: SF-DEV-14010 | Brand: SparkFun

A pack of five pink LilyPad LEDs designed for wearable electronics and e-textile projects. The LEDs come attached to one another on a snap-apart strip, ready to be sewn into clothing, accessories, or fabric-based circ...

SKU: AF-659 | Brand: Adafruit

FLORA is Adafruit's fully-featured wearable electronics platform. It's a round, sewable, Arduino-compatible microcontroller designed to empower amazing wearables projects.FLORA comes with Adafruit's support, tut...

SKU: AF-603 | Brand: Adafruit

This 316L stainless steel conductive yarn sits between a thick thread and a thin yarn in weight. Its high conductivity and soft, flexible texture make it particularly well-suited for making touchscreen-compatible glov...

SKU: SF-DEV-08776 | Brand: SparkFun

We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).LilyPad is a wearable e-textile technology develo...

SKU: SF-DEV-10867 | Brand: SparkFun

This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics...

SKU: AF-3501 | Brand: Adafruit

The Adafruit GEMMA M0 is a tiny, coin-sized microcontroller board designed for wearable electronics and small projects. Despite its quarter-sized footprint, it packs serious power with an ATSAMD21E18 32-bit Cortex M0+...

SKU: AF-4607 | Brand: Adafruit

Copper sheet can be an interesting addition to your toolbox. The sheet itself is made of thin pure copper so its extremely flexible and can take on nearly any shape. You can easily solder to it, and the material it...

SKU: SF-DEV-14012 | Brand: SparkFun

This is a simple pack of five Blue LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-te...

SKU: SF-DEV-10899 | Brand: SparkFun

The LilyTiny is a compact LilyPad board with a built-in ATtiny85 microcontroller that drives four pre-programmed LED patterns. Simply sew on four LEDs and connect a battery — no programming or main board required. Ea...

SKU: AF-5463 | Brand: Adafruit

This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play ...

SKU: SF-ROB-08449 | Brand: SparkFun

A vibration motor! This itty-bitty, shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protecte...

SKU: AF-640 | Brand: Adafruit

After months of searching, we finally have what we consider to be the ultimate conductive thread. It's thin, strong, smooth, and made completely of 316L stainless steel. Once you start working with this thread you'...

SKU: AF-3377 | Brand: Adafruit

Add a little sparkle to your wearable project with Adafruit LED Sequins. These tiny sewable LED boards are the simpler sibling of Flora NeoPixels — they display a single colour with no digital control needed, making t...

SKU: KI-5625 | Brand: Kitronik

The ZIP Halo is a circular LED board for the BBC micro:bit featuring 24 individually addressable full-colour ZIP LEDs (WS2812B). Each LED can display a huge spectrum of colours, enabling vibrant rainbow effects, colou...