Wearables & E-textiles

SKU: SF-DEV-11893 | Brand: SparkFun

The LilyPad Simple Power is a simple e-textile board that lets you connect and charge a lipo battery and switch it on or off, that’s it! We provide you with a JST connector and a slide switch, you supply the battery a...

SKU: SF-SEN-09673 | Brand: SparkFun

A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approxim...

SKU: AF-1458 | Brand: Adafruit

Sense the world around you! The FLORA Sensor Pack includes many types of sensors for your wearable enjoyment. Sense motion, direction, color, light levels, touch, and connections with FLORA sensor breakouts and con...

SKU: AF-6182 | Brand: Adafruit

A 10-wire silicone-covered ribbon cable that's extremely supple and flexible. The silicone sheathing handles temperatures up to 200°C and voltages up to 600 V — far beyond what PVC-covered wire can manage. Pull and se...

SKU: KS-KS4011 | Brand: Keyestudio

Upgrade your coding and E-Textile Project with the Keyestudio Micro:bit Honeycomb Ultimate Kit. This smart wearable kit allows you to write code and control various sensors and modules with the Micro:bit main board an...

SKU: LB-FINCH-5 | Brand: Little Bird

Bulk pack of 5The Little Bird Finch is our smallest programmable board. The Finch is a tiny little  board designed to add flashy functionality to your project without taking up a lot of room. It has an ...

SKU: M5-K009-F | Brand: Little Bird

A wearable watch kit designed for the M5Stack Core series. This kit transforms an M5Core development board into a wrist-worn smart device, combining the full capabilities of the M5Core with a comfortable strap and int...

SKU: PI-TEK002 | Brand: Pimoroni

A tiny, vibrating motor, easily attachable to paper or fabric! Just connect 3-5V across it, polarity doesn't matter, and it'll BUUUUZZZZZZ!!! The voltage (and hence current) supplied from LIR2032 recharge...

SKU: AF-1246 | Brand: Adafruit

Add light-reactive sensing to your wearable Flora project with this high precision Lux sensor. The TSL2561 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Comp...

SKU: LB-LR0335-Y | Brand: Little Bird

This 5-metre length of EL wire (electroluminescent wire) glows a vibrant yellow when powered by the included battery-operated inverter. EL wire is a flexible, phosphor-coated wire that produces a cool, even glow simil...

SKU: AF-1324 | Brand: Adafruit

Conductive hook & loop tape is just like the stuff you've seen on jackets, clothes, shoes, and bags, but is coated with silver to make it fully conductive. Originally this was designed to the manufacture of static-...

SKU: LB-LR0281-5-G | Brand: Little Bird

A 5-metre length of green electroluminescent (EL) wire with a battery-powered inverter included. EL wire is a flexible, phosphor-coated wire that produces a bright, even glow along its entire length — similar in appea...

SKU: AF-3670 | Brand: Adafruit

High-conductive heating fabrics are Literally! This non-woven fabric feels a little like felted paper but is filled with conductive material that can make the fabric emit heat when powered. Resistive heating fabrics s...

SKU: AF-1657 | Brand: Adafruit

Get started with Adafruit GEMMA with this lovely starter kit! Included is everything you need to make a basic project. There's a GEMMA board, four sewable bright RGB pixels, a battery holder and batteries, 2-p...

SKU: AF-1839 | Brand: Adafruit

Making Wearables with an Arduino-Compatible Electronics PlatformThis book introduces readers to building wearable electronics projects using Adafruit's tiny FLORA board: at 4.4 grams, and only 1.75 inches in diameter...

SKU: DF-DFR0185-LB | Brand: DFRobot

Electroluminecent wire, otherwise known as EL Wire, is a thin phosphor coated wire in a tube that lights up when you apply a high AC voltage to it. EL Wire typically needs anywhere between 20Vac to 220Vac, at a very ...

SKU: SF-DEV-08463 | Brand: SparkFun

This is a small buzzer for the LilyPad system. Use 2 I/O pins on the LilyPad main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusi...

SKU: SF-PRT-11214 | Brand: SparkFun

MOSFETs are awesome. They’re like a switch that you flip electronically! This SparkFun MOSFET Power Controller makes it easy to switch a battery supply on and off using your favorite microcontroller. The board also ha...

SKU: AF-406 | Brand: Adafruit

EL Wire, also known as Electroluminescent wire is a stiff wire core coated with phosphor and then covered with a protective PVC sheath. When an AC signal is applied to it, it glows an aqua (blue green) color. You c...

SKU: SF-COM-10193 | Brand: SparkFun

EL wire, or electroluminescent wire, is a flexible wire coated in phosphor. Apply the appropriate voltage and it lights up! It looks a lot like a thin flexible neon tube. They come in many bright colors (check below f...