Wearable Tech & E-textiles

SKU: SF-DEV-14629 | Brand: SparkFun

The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...

SKU: KI-2746 | Brand: Kitronik

When using through hole LEDs it can be hard to form the eyelets and then work out which leg is positive and negative. That's where these Sewable LED Holders come in! The 5mm LED holder boards, quickly and easily take ...

SKU: DF-FIT0743 | Brand: DFRobot

This smooth stainless steel fibre thread is made for sewing conductivity into fabric and wearable projects. It offers low resistance, good thermal conductivity, a high melting point, and high-temperature resistance.Ea...

SKU: DF-FIT0744 | Brand: DFRobot

This smooth stainless steel fibre thread lets you sew conductive paths into fabric for wearable electronics and soft-circuit projects. It offers low resistance, good thermal conductivity, a high melting point and high...

SKU: DF-FIT0745 | Brand: DFRobot

This smooth stainless steel fibre sewing thread is conductive, making it handy for wearable electronics, soft circuits and other low-current maker projects. Each roll includes 10m of thread with a resistance of about ...

SKU: DF-FIT0746 | Brand: DFRobot

This smooth stainless steel fibre sewing thread is conductive, making it handy for e-textiles, wearable electronics and other small-current projects. It has a resistance of about 9Ω per metre and comes as a 7 metre ro...

SKU: DF-FIT0747 | Brand: DFRobot

This smooth stainless steel fibre conductive sewing thread is handy for soft circuits, wearables and e-textile projects where you need to stitch an electrical connection into fabric.Each roll provides 5m of thread wit...

SKU: DF-FIT0748 | Brand: DFRobot

This smooth stainless steel fibre sewing thread is conductive, making it handy for wearable electronics, soft circuits and other small-current projects where ordinary wire is too stiff.Each roll includes 1 metre of th...

SKU: AF-6024 | Brand: Adafruit

Add tiny points of addressable colour to costumes, props, wearables and embedded builds without fighting a fragile flexible PCB. This NeoPixel strand uses solid plated wire cords that hold their shape, making it easie...

SKU: AF-6023 | Brand: Adafruit

For wearable builds and sculptural lighting, this NeoPixel strand gives you lots of tiny RGB points without a flexible PCB to crack. Each coated NeoPixel sits on soft plastic-coated plated wire, so the strand can be s...

SKU: AF-6025 | Brand: Adafruit

Add tiny dots of colour to costumes, props, wearables and embedded builds without the stiffness of a normal flexible PCB strip. This NeoPixel strand uses solid plated wire that holds its shape, making it easier to sew...

SKU: AF-6026 | Brand: Adafruit

This strand puts tiny NeoPixel “pebbles” or “seeds” along solid plated wires, making it easier to add dots of colour to costumes, props, wearables and embedded structures than a flexible PCB strip that can crack when ...

SKU: LB-LR0347A | Brand: Little Bird

This E-Textiles  Coin Cell Battery Holder has a small slide switch installed on the board, in-line with the power so you can shut off your project and save batteries. This slide switch is the same as is found on ...

SKU: AF-4429 | Brand: Adafruit

This 13.56 MHz RFID/NFC sewable button uses an NTAG213 chip in a compact 24 mm laundry-tag form factor. It can be sewn into garments, attached to equipment, or embedded in projects for contactless identification, data...

SKU: KI-2715 | Brand: Kitronik

A starter kit for e-textiles and wearable electronics from Kitronik's Electro-Fashion range. This Discovery Pack includes a curated selection of sewable components — LEDs, switches, coin cell holders, conductive threa...

SKU: PI-TEK004 | Brand: Pimoroni

A four pack of sewable, heart-shaped bright pink LEDs. The voltage (and hence current) supplied from LIR2032 rechargeable coin cell batteries may damage the Teknikio LED boards, so please ONLY USE CR...

SKU: LB-LR0309-45 | Brand: Little Bird

A 1-metre length of soft conductive sewing thread made from stainless steel, designed for wearable electronics projects. Use it to sew electrical connections between LilyPad components, sewable LEDs, and batteries — r...

SKU: LB-BK-LR0347A | Brand: Little Bird

A sewable coin cell battery holder with built-in on/off slide switch, designed for e-textile and wearable electronics projects. This bulk 10-pack is ideal for classrooms, workshops, and makerspaces. Each holder accep...

SKU: PI-TEK009 | Brand: Pimoroni

Introducing "Shivers" the penguin. Comes with eco-felt penguin pieces to assemble plushie penguin and electronic parts to sew a shivering circuit inside. Motionboard is activated when you squeeze him! Set incl...

SKU: PI-TEK005 | Brand: Pimoroni

Two diamond-shaped, sewable LED boards that are colour-changeable! They can be connected to light up in red, blue, green, or any combination of those colours! The voltage (and hence current) supplied from&nbsp...