Wearable Tech & E-textiles

SKU: LB-BUZZER | Brand: Little Bird

This is a small buzzer for use with E-Textiles. Use 2 I/O pins on the Buzzer main board and create different noises based on the different frequency of I/O toggling. Loud enough to hear inside a pocket but not obtrusi...

SKU: KI-2726 | Brand: Kitronik

Ultra-slim sewable LED boards from Kitronik in sakura lilac, designed for e-textile and wearable electronics projects. Each LED board runs from a 3V coin cell battery and illuminates continuously when powered. The dou...

SKU: AF-1126 | Brand: Adafruit

Tin-plated brass sewable snaps in a compact 5 mm diameter, ideal for wearable electronics. Solder one side to a PCB pad and sew the other to your project with conductive thread for a detachable electrical connection. ...

SKU: AF-1285 | Brand: Adafruit

The Adafruit Beginner LED Sewing Kit has everything you need to start stitching glowing circuits with conductive thread. No soldering or microcontroller required — the included candle-flicker LEDs twinkle automaticall...

SKU: KS-KS4011 | Brand: Keyestudio

Upgrade your coding and E-Textile Project with the Keyestudio Micro:bit Honeycomb Ultimate Kit. This smart wearable kit allows you to write code and control various sensors and modules with the Micro:bit main board an...

SKU: DF-FIT0823 | Brand: DFRobot

Start your creative DIY project with this high-quality wire pack! The pack contains several kinds of conductive materials that basically meet your common needs of wiring. It includes conductive cloth tape with excelle...

SKU: LB-FINCH-5 | Brand: Little Bird

Bulk pack of 5The Little Bird Finch is our smallest programmable board. The Finch is a tiny little  board designed to add flashy functionality to your project without taking up a lot of room. It has an ...

SKU: AF-4762 | Brand: Adafruit

With our fun assortment of conductive materials, cosplay and wearables have never been easier to craft! These Conductive Nylon Squares go great with our other interesting materials, such as copper tape,...

SKU: SF-DEV-13735 | Brand: SparkFun

Blink any color you need! Use the LilyPad RGB LED board as a simple indicator, or by pulsing the red, green, and blue channels, you can produce a broad variety of colors. Each of the colors in the RGB LED are connecte...

SKU: PI-TEK002 | Brand: Pimoroni

A tiny, vibrating motor, easily attachable to paper or fabric! Just connect 3-5V across it, polarity doesn't matter, and it'll BUUUUZZZZZZ!!! The voltage (and hence current) supplied from LIR2032 recharge...

SKU: AF-6201 | Brand: Adafruit

A warm-white LED filament shaped as the letter "J", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6210 | Brand: Adafruit

A warm-white LED filament shaped as the letter "S", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: AF-6217 | Brand: Adafruit

A warm-white LED filament shaped as the letter "Z", made from COB (chip on board) LEDs — the same technology found in Edison-style LED bulbs. Dozens of micro LED diodes are bonded onto a thin metal backing and coated ...

SKU: LB-SLIDE-E | Brand: Little Bird

Introducing our E-Textiles Slide Switch pack, perfect for all your electronic textile projects! This pack includes 5 slide switches, each designed to provide a seamless and reliable connection for your e-textiles. Wit...

SKU: AF-6077 | Brand: Adafruit

If you’re looking to add a USB-C connector to your wearable tech project, check out our sewable connectors! This USB Type-C connector is mounted horizontally on a flexible, sewable base, with red and black power wires...

SKU: AF-6076 | Brand: Adafruit

If you want to add a Micro-B connector to your favorite garment for a wearable tech project, check out our sewable connectors! This Micro-B connector is mounted horizontally on a flexible, sewable base, with red and b...

SKU: AF-6075 | Brand: Adafruit

A 5.5/2.1mm DC barrel jack mounted on a flexible, sewable base for wearable tech and fabric-based projects. The jack sits horizontally with red (positive) and black (ground) wires extending from the bottom for easy po...

SKU: AF-5605 | Brand: Adafruit

These dLUX-dLITE succulent-shaped LEDs from Unexpected Labs are handcrafted decorative LEDs that look like tiny succulents when lit. Each LED is individually made, giving every piece a unique appearance — perfect for ...

SKU: AF-5491 | Brand: Adafruit

These ultra-fine wired LEDs are designed for model-makers and crafters but they could also come in handy for folks who want to add tiny points of light to a design without needing SMT-level soldering skills. Use ...

SKU: PR-PIM402 | Brand: Little Bird

This handy little speaker with onboard analogue amplifier works great with micro:bit, and it's sewable and croc-clippable!We use this little speaker in our MINI.MU kits, and it's an ideal way to add some sound to your...