USB Cables

SKU: AF-5652 | Brand: Adafruit

Some days we're feeling extra fancy here at the 'fruit warehouse, and we have a big soft spot for woven fabric cables. Like, peep this fully reversible pink/purple Blinka-inspired cable or this mithril-like 3-in-1 Syn...

SKU: DF-FIT0903 | Brand: DFRobot

The cable is compatible with LattePanda 2 Alpha&Delta, and LattePanda 3 Delta 864.With the DC 5.5x2.1mm Power Cable, LattePanda can be powered by a common 12V DC power supply or a 12V battery pack easily. Feat...

SKU: WS-21358 | Brand: Waveshare

Turn an M.2 SATA SSD into a portable USB-C flash drive. This compact adapter accepts M.2 NGFF (B-key / B+M-key) SSDs and connects to any USB-C port at USB 3.2 Gen 2 speeds — up to 6 Gbps (limited by SATA III interface...

SKU: DF-FIT0784 | Brand: DFRobot

A DC 5.5×2.1mm female to USB Type-C male power adapter plug, allowing you to power USB-C devices from a DC barrel jack power supply. Useful for powering Raspberry Pi 4/5, LattePanda, and other USB-C-powered boards fro...

SKU: DF-FIT0783 | Brand: DFRobot

A DC 5.5×2.1mm female to Micro-USB male power adapter plug, allowing you to power Micro-USB devices from a DC barrel jack power supply. Useful for powering Raspberry Pi, LattePanda, phones, and tablets from existing D...

SKU: AF-5216 | Brand: Adafruit

If you have a USB Type C port on your computer over here and you want to connect something over there then this extension cable will do the job right quick!This cable is 2 meters long, with all the pins connecting fro...

SKU: AF-4471 | Brand: Adafruit

The Adafruit MCP2221A Breakout lets your computer talk directly to I2C devices, sensors, and GPIO — no microcontroller required. Drive an OLED display, read a colour sensor, flash LEDs, or read buttons straight from P...

SKU: AF-4472 | Brand: Adafruit

This USB Type A to Type C cable provides a simple way to connect modern USB-C devices to computers, hubs, and chargers that use the standard USB Type A (rectangular) port. At just 6 inches long, it's perfect for short...

SKU: AF-4432 | Brand: Adafruit

As technology changes and adapts, so does Adafruit, and speaking of adapting, this right angle adapter is USB C socket-to-plug.USB C is the latest industry-standard connector for transmitting data and power. Like Ligh...

SKU: AF-4331 | Brand: Adafruit

Just about all electronics use a UART serial port with RX and TX pins for debugging, bootloading, programming, serial output, etc. But it's rare for a computer to have a serial port anymore. Thus, a serial cable is an...

SKU: AF-4212 | Brand: Adafruit

If you need to add a panel-mount connection for USB B, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's a...

SKU: AF-4106 | Brand: Adafruit

If you love DIY cable-rigging, then these USB adapters are right up your alley! Making custom USB cables has never been easier. Just grab one of our ribbon cables, then swap and switch any of our USB adapters on...

SKU: SF-CAB-14743 | Brand: SparkFun

USB C is fantastic. But until we have converted all our hubs, chargers, and ports over to USB C this is the cable you’re going to need. Supporting USB 3.1 speeds, this 1 meter cable is perfect for high data rate tr...

SKU: AF-974 | Brand: Adafruit

This flexible USB swivel adapter will extend your USB port out of the way. Useful when you want to attach a 'bulky' USB device without blocking a secondary port. We thought this would be handy for BeagleBone or Raspbe...

SKU: SF-DEV-15096 | Brand: SparkFun

This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G and takes advantage of the handy USB-C connector. With USB-C you can get up to three times the power delivery over the pr...

SKU: AF-1389 | Brand: Adafruit

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a tw...

SKU: AF-1388 | Brand: Adafruit

Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. These DIY "USB shells" are available in USB A plug, micro B, mini B and USB A socket.Each shell comes with a tw...

SKU: SF-CAB-14574 | Brand: SparkFun

These 2-pin JST-SM pigtail connectors mate perfectly with LED strips and other applications that require only two lines and an option for quick connection and disconnection. Even if you don’t have a specific use for t...

SKU: AF-2225 | Brand: Adafruit

This is just a standard USB-A jack.  It's a sturdy metal with 4 pins in the back and 2 small mounting tabs that make it easy to use in your next USB projectWe use this USB-A jack for everything, really. With a li...

SKU: SF-CAB-14276 | Brand: SparkFun

USB On-The-Go (OTG) is a really useful USB specification! It allows some small devices that would normally be unable to act as a host to have limited hosting capabilities! USB OTG is common for things like tablet c...