Tools & Equipment

SKU: SF-TOL-09162 | Brand: SparkFun

This is your basic tube of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 15 grams (around 5ft). Easy to solder with - recommended for beginners. Mix: 63% Sn / 37% Pb

SKU: SF-TOL-08793 | Brand: SparkFun

Mini Pliers. These are great little pliers! A must have for any hobbyist or electrical engineer. Crucial for inserting devices into bread boards and bending pins. 4" long.

SKU: AF-149 | Brand: Adafruit

A 1.5 m (5 ft) spool of desoldering wick (braid) for removing excess solder and cleaning up solder joints. Particularly useful for surface-mount (SMT) rework — press the wick against the joint with a hot iron, and the...

SKU: AF-1930 | Brand: Adafruit

A 50 g spool of lead-free SAC305 solder wire in a fine 0.5 mm (0.02″) diameter — ideal for both through-hole and SMT soldering work. The no-clean rosin core flux makes for clean joints without the need for post-solder...

SKU: AF-2414 | Brand: Adafruit

The all-mighty Jimmy from IFixIt is the best way out from an iRock and an iHardPlace. Slide, cut, twist, poke, slice, part, uproot, divide, lift, dissect, separate, and pry your devices to check out the...

SKU: LB-LS4437 | Brand: Little Bird

A festive DIY soldering kit that assembles into a two-sided LED Christmas tree, complete with a clear acrylic display case. Perfect for beginners learning to solder or hobbyists who enjoy seasonal electronics projects...

SKU: DF-FIT0736 | Brand: DFRobot

These hook test clips provide a quick, solder-free way to connect to breakout boards, IC pins, and circuit test points. The set includes 10 wires in 5 colours for easy circuit identification, with silicone-insulated l...

SKU: AF-4747 | Brand: Adafruit

If you've got a lot of wire-stripping to do, you may want to try out an automatic stripper/cutter! They are fantastic for stripping and cutting stranded and solid-core 24 or thicker AWG wires and ribbon cables. The...

SKU: LB-LS1610 | Brand: Little Bird

These handy little pliers are great for you electronic and 3D printing need.  Use them for trimming and twisting.Pack contains 1 x Nose Plier1 x Wire Plier1 x Diagonal Plier

SKU: AF-1468 | Brand: Adafruit

Get that heat sink stuck on good and strong with 3M's thermal tape. Specifically designed for attaching heat sinks to ICs. Works better and is less messy than thermal glues or pastes because the thickness is even acro...

SKU: TB-TS1620 | Brand: Little Bird

An entry-level temperature-controlled soldering station ideal for hobbyists and beginners. The lightweight iron features an anti-slip grip and comes with a tip-cleaning sponge, while the base unit provides analogue te...

SKU: SF-PRT-12978 | Brand: SparkFun

A pack of 10 multicoloured alligator-to-alligator clip test leads — an essential for any electronics workbench. Whether you're making quick connections to test a circuit or extending your multimeter leads, these sprin...

SKU: TB-NS3046 | Brand: Little Bird

Ideal for surface mount work and rework, solder paste provides a quick and easy soldering solution. Supplied in a syringe for easy application, simply apply it to the soldering pads, put your components in place and h...

SKU: LB-LS7240-H | Brand: Little Bird

Introducing the perfect solution for prototyping - our Half-size Permanent Solder Breadboard PCB! With this board, you can easily transfer your circuit from a solderless breadboard to a more permanent solution wi...

SKU: SF-TOL-17235 | Brand: SparkFun

The Stickvise holds your PCB flat at table level, giving your hands a stable surface to rest on while soldering — a significant advantage over elevated, tilted vises when working on fine pitch components. The low-prof...

SKU: LB-LS2120 | Brand: Little Bird

This soldering station has 6 flexible arms with high quality silicon alligator clip  to hold your project while you solder.Specification:Lens Diameter:60mmMagnification:3XLED:42 SMD LED LightsCharge:Under 5V 1.5A...

SKU: AF-3836 | Brand: Adafruit

If you do a lot of soldering indoors, a Carbon Filter is essential for absorbing that solder smoke and leaving your air smelling fresh. These measure about 13 x 13cm but are easy to trim with scissors or ...

SKU: SF-TOL-09163 | Brand: SparkFun

A convenient 15-gram tube of lead-free solder, ideal for electronics projects, repairs, and prototyping. The SAC305 alloy (96.5% tin, 3.0% silver, 0.5% copper) provides strong, reliable joints with excellent wetting c...

SKU: DF-FIT0216 | Brand: DFRobot

A compact, spring-loaded desoldering pump (solder sucker) for removing solder from PCB joints and through-holes. The ProsKit DP-366D features a double oil-sealed piston for guaranteed leak-free suction and a soft foam...

SKU: AF-3057 | Brand: Adafruit

Polyimide Tape (sometimes referred to by the brand name Kapton Tape) is an interesting addition to your toolbox! Polyimide Tape remains stable across a wide range of temperatures from about −269°C to +400°C.&n...