Tools & Equipment

SKU: AF-1599 | Brand: Adafruit

Save your scissors! Instead of using your nice shears (and dulling them) or wire cutters (not right for the job) - use these super scissors. They're meant for engineering/maker cutting jobs such as cutting plastic, le...

SKU: AF-1869 | Brand: Adafruit

The Quick 957D is a hot air soldering rework station with an internal pump and heater that delivers a steady stream of temperature-controlled hot air. It is designed for removing and replacing surface-mount components...

SKU: AF-2209 | Brand: Adafruit

The SEGGER J-Link BASE is an industry-standard JTAG/SWD debugger and programmer for ARM-based microcontrollers. It connects via USB and provides hardware debugging, flash programming, and real-time memory access acros...

SKU: AF-2457 | Brand: Adafruit

*Ka-thunk* Pin down that PCB with our Toggle Clamp, a sturdy and reliable way to quickly press and release with precision! A pogo-pin bed is a great way to connect and test boards without any soldering, but you have t...

SKU: AF-2459 | Brand: Adafruit

*Ka-thunk* Pin down that PCB with our Toggle Clamp, a sturdy and reliable way to quickly press and release with precision! A pogo-pin bed is a great way to connect and test boards without any soldering, but yo...

SKU: AF-2456 | Brand: Adafruit

This medium flip-up toggle clamp provides a quick, reliable way to press and hold PCBs firmly in place during testing, soldering, or pogo-pin bed operations. The rounded rubber tip grips securely without marring or da...

SKU: DF-DFR0130-G | Brand: DFRobot

This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading st...

SKU: DF-DFR0130-R | Brand: DFRobot

This is a standalone DC voltage meter. It measures 3V-30V with 1% accuracy. Best suited for battery level display. Just apply two wires on the power without any extra circuit or components, it gives the reading st...

SKU: SF-PRT-14313 | Brand: SparkFun

This Digital LED Voltmeter measures the voltage at a particular point of the system it has been hooked up to and then provides a readout on its three 7-segment LEDs. This voltmeter is able to provide a readout of volt...

SKU: SF-TOL-14235 | Brand: SparkFun

The Xcelite 8-in-1 Screwdriver Set provides eight high-quality bits in a single ergonomic tool. Each bit is easily accessible with a spring-loaded magnetic housing that holds the seven included bits you aren’t current...

SKU: DF-DFR0244-G | Brand: DFRobot

A panel-mount LED current meter that measures 0–9.99 A DC with 2% accuracy. The bright green 3-digit LED display is easy to read, and the meter requires no external circuitry — just connect four wires and it gives a r...

SKU: DF-DFR0245-G | Brand: DFRobot

This panel-mount LED current meter displays DC current readings from 0 to 50A on a bright green 3-digit LED display. It features reverse connection protection to prevent damage, and requires just four wires to install...

SKU: DF-DFR0245-R | Brand: DFRobot

This is a standard LED Current Meter 50A. The biggest feature is that the LED Current Meter have reversed connection protection to prevent from being burnted out. It measures 0-50A with 2% error. Best suitable...

SKU: DF-DFR0244-B | Brand: DFRobot

This is a standard LED Current Meter 10A. It measures 0-9.99A with 2% accuracy. Best suitable for current display in the circuit.Just apply four wires without any extra circuit or components, it gives the reading s...

SKU: DF-DFR0244-R | Brand: DFRobot

This is a standard LED Current Meter 10A. It measures 0-9.99A with 2% accuracy. Best suitable for current display in the circuit.Just apply four wires without any extra circuit or components, it gives the reading s...

SKU: AF-3596 | Brand: Adafruit

A set of 10 hot air rework nozzles for surface-mount soldering repair. The kit includes five round nozzles in various diameters for general-purpose work, plus five specialty nozzles designed for removing and reworking...

SKU: DF-FIT0339 | Brand: DFRobot

A 5-piece hex driver set with interchangeable screwdriver heads and an aluminium alloy CNC-machined handle. The HSS high-alloy steel tips are wear and distortion resistant, making this set ideal for precision work on ...

SKU: SF-PRT-00121 | Brand: SparkFun

A small black anodised aluminium heatsink designed for TO-220 package components. Bolts directly onto voltage regulators, transistors, and other TO-220 devices to help dissipate heat and keep them running within safe ...

SKU: AF-349 | Brand: Adafruit

Make cables and wiring harnesses with ease using the best crimping pliers we've used. These precision machined crimpers will turn you into a pro, no more painful struggles with pliers and generic crimpers that smoo...

SKU: AF-3197 | Brand: Adafruit

Are you still looking for that perfect PCB holder? The low profile PCB Stickvise might be just the thing you need! In performing the simple task of holding a PCB near table level, the Stickvise is...