Tools & Accessories

SKU: SF-CAB-09556 | Brand: SparkFun

This is an interface cable for the Bus Pirate, designed to connect to its 2x5 I/O header. The cable’s connector is composed of two rows of five 0.1" spaced pins; it’s also polarized, as is the mating connector on-b...

SKU: AF-5910 | Brand: Adafruit

With the iFixit Soldering Splint by your side, you don't have to wish you had a third-hand. This board is perfect for when you are joining two wires together, also known as splinting! Compact enough to fit into a...

SKU: AF-5911 | Brand: Adafruit

This anti-static wrist strap is great for electronic work and repair, especially delicate or ESD-sensitive work. Ground yourself while working on sensitive electronics to prevent static charge build-up!The Anti-Static...

SKU: AF-4405 | Brand: Adafruit

This anti-static ESD rework mat provides a safe working surface for electronic repair and assembly, especially when handling ESD-sensitive components. The high-resistance coating (tens of megaohms) dissipates static c...

SKU: SF-TOL-09146 | Brand: SparkFun

This is just your basic reversible screwdriver - pocket sized! Both flat and phillips heads available. Comes with pin clip and snazzy SparkFun logo.

SKU: AF-146 | Brand: Adafruit

Simple needlenose pliers for twisting, pulling and pliering your project.

SKU: SF-TOL-10865 | Brand: SparkFun

There’s nothing worse than getting ready for a good hack and then realizing that you can’t even get the box open because you don’t have the right screwdriver. Sure, we all have a few Phillips-head drivers and maybe a ...

SKU: AF-2121 | Brand: Adafruit

A 1.1 mm carbide (tungsten steel) drill bit designed for drilling precise holes in PCBs. High hardness, wear resistance, and a sharp cutting edge ensure clean holes through copper-clad board without bending or breakin...

SKU: SF-TOL-25566 | Brand: SparkFun

Use this precision Phillips #00 screwdriver for DIY or professional small electronics repair. The Phillips #00 screw is the most commonly used fastener in the internals of consumer electronics, game consoles, laptops,...

SKU: AF-3929 | Brand: Adafruit

Cut through cardboard like butter with the Canary Box Cutter. This Japanese-made tool is perfectly engineered, way better than using scissors or a craft knife.This is the perfect tool for cardboard-crafting-trashbot e...

SKU: AF-3720 | Brand: Adafruit

Praise the sun! You will never have that awkward situation where your caliper battery dies just when you need to take a measurement. Sure, if you have the budget, we recommend these near-indestructable high-end Mitut...

SKU: SF-TOL-09316 | Brand: SparkFun

When working with small parts, sometimes you need magnification and some extra light. This is a monocle we use regularly in our production facility. It has a 10x lens with a working distance of about 1-½". The 1" diam...

SKU: SF-TOL-12033 | Brand: SparkFun

A parts kit for building or repairing an additional arm on the SparkFun Third Hand soldering helper. Includes alligator clips and the hardware needed to convert a coolant hose segment into a flexible helping hand. Id...

SKU: SF-SWG-11046 | Brand: SparkFun

These were really nice safety glasses. Then we decided to completely ruin them and slap the geek logo on there. Don’t worry, it doesn’t impair your vision… dangerously. Here our photographer, Juan, is helping our...

SKU: DF-FIT0400 | Brand: DFRobot

A compact 30× magnification loupe with built-in LED illumination for inspecting circuit boards, solder joints, fine print, and small components. The fold-out design is pocket-friendly, making it a handy tool for the w...

SKU: AF-396 | Brand: Adafruit

If you've ever had to remove a stripped bolt or screw, you know how incredibly frustrating it can be. Normal pliers slip when trying to grip onto the screw head. Unless you're careful, you can easily make the problem ...

SKU: SF-TOL-13114 | Brand: SparkFun

A dual-sided resistor lead forming tool for bending component leads to precise through-hole spacing. One side handles 1/4W resistors with spacing from 0.4" to 1.5" (10–38mm), and the other handles 1/2W resistors with ...

SKU: AF-3284 | Brand: Adafruit

The Adafruit Pocket Screwdriver is a compact dual-ended tool that clips onto your shirt or pant pocket so you always have a screwdriver on hand. The Phillips head fits 3.5 mm terminal blocks commonly found on electron...

SKU: SF-TOL-10602 | Brand: SparkFun

Precision curved tweezers with an ESD-safe coating, ideal for handling surface-mount components and other small electronic parts. The fine curved tip provides excellent control when placing or removing tiny components...

SKU: AF-734 | Brand: Adafruit

A 100 g (1/4 lb) spool of SAC305 lead-free solder with no-clean rosin core flux. At 0.031" (0.8 mm) diameter, it's a versatile gauge suited to through-hole soldering and larger SMT work. The industry-standard SAC305 f...