Storage & Memory

SKU: RP-SC1166 | Brand: Raspberry Pi Ltd

The Raspberry Pi M.2 HAT+ facilitates the connection of M.2 peripherals like NVMe drives and AI accelerators to the Raspberry Pi 5 through its PCIe 2.0 interface, offering quick data transfers up to 500 MB/s. Thi...

SKU: WS-26583 | Brand: Waveshare

Add high-speed NVMe storage to your Raspberry Pi 5 with this PCIe to M.2 adapter HAT from Waveshare. It connects via the Pi 5's dedicated PCIe interface using a 16-pin cable and supports M.2 NVMe SSDs in 2230 and 2242...

SKU: EC-RPI08239D | Brand: Elecrow

This SSD expansion board is specifically designed for the Raspberry Pi 5, featuring PCIe and M.2 M-key interfaces that enable the use of high-speed M.2 NVMe solid-state drives. This setup enhances storage performance ...

SKU: WS-31536 | Brand: Waveshare

Unleash the full potential of your Raspberry Pi 5 with the cutting-edge PCIe to M.2 Adapter with PoE Function (C). Designed with power users in mind, this highly adaptable expansion board offers seamless integration o...

SKU: DF-FIT0871 | Brand: DFRobot

The Argon ONE M.2 is a premium aluminium alloy case for the Raspberry Pi 4B, featuring an M.2 SATA SSD expansion slot for faster boot times and larger storage. With its Space Grey finish, full-size dual HDMI output, a...

SKU: WS-31436 | Brand: Waveshare

Unleash the true potential of your Raspberry Pi 5 with our cutting-edge PCIe to USB 3.2 Gen1 and M.2 HAT - the ultimate expansion device for tech enthusiasts and power users alike. This HAT+ Standard compliant hardwar...

SKU: WS-30535 | Brand: Waveshare

A PCIe adapter board for the Raspberry Pi 5 that supports up to four M.2 NVMe SSDs simultaneously. Connect via the Pi 5's PCIe interface using the included 16-pin cable and gain dramatically faster storage for NAS bui...

SKU: EC-RPA05036T | Brand: Elecrow

The 2-in-1 TF Card Dual System Switcher lets you install two MicroSD (TF) cards on a single Raspberry Pi and switch between them using a physical toggle. This allows you to run two different operating systems and swap...

SKU: AF-4395 | Brand: Adafruit

Stop fiddling with micro SD card sockets in the back of your latest gadget during development, and give yourself a little more elbow room with this Small Micro SD Card Extender. This is a great hack for length constra...

SKU: WS-21358 | Brand: Waveshare

Turn an M.2 SATA SSD into a portable USB-C flash drive. This compact adapter accepts M.2 NGFF (B-key / B+M-key) SSDs and connects to any USB-C port at USB 3.2 Gen 2 speeds — up to 6 Gbps (limited by SATA III interface...

SKU: AF-5447 | Brand: Adafruit

A short-profile microSD-to-SD card adapter that sits 11 mm shorter than a standard SD card (excluding the silver lip). It protrudes far less from the card slot, reducing the risk of accidental damage — ideal for lapto...

SKU: AF-6060 | Brand: Adafruit

Move an awkward card slot to somewhere easier to reach with this flexible SD to microSD extender. It gives you a long cable with a pseudo-card on one end and an SD card socket on the other, so you can plug into the ho...

SKU: PI-PIM699 | Brand: Pimoroni

Add super-fast NVMe storage to your Raspberry Pi 5 with the Pimoroni NVMe Base. This PCIe extension board mounts underneath your Pi and accepts M-key NVMe SSDs in 2230 to 2280 form factors, delivering lightning-fast b...

SKU: PR-PIM704 | Brand: Little Bird

Add two super-fast NVMe SSDs to your Raspberry Pi 5! Ideal if you need redundancy or just a load more storage on your RPi.NVMe Base Duo is a PCIe Gen 2 extension board for Raspberry Pi 5. Simply populate it with one o...

SKU: PI-CAB0907 | Brand: Pimoroni

A 15cm extension cable for a microSD card. Insert your microSD card into one end and then connect the other end to your Pi / PC / anything with a microSD socket and voila, you're connected!

SKU: PI-ADP001 | Brand: Pimoroni

Need more gigabytes on your Pi? Connect a SATA hard disk or SSD to your Raspberry Pi with this compact, high-performance USB 3.0 to SATA adapter.Great for storing media, games, data, or backing up your proje...

SKU: PI-TSX00004 | Brand: Pimoroni

Add a SD slot and prototyping area in a single shield The Arduino MKR SD Proto Shield allows you to easily connect an SD card to your MKR form factor board. Use it to enhance the IoT features of your MKR1000, as ...