STEM & Education

SKU: MR-CB-KT-FLASHLIGHT-1 | Brand: Modular Robotics

The Flashlight Cubelet is an action block for the Cubelets modular robotics system. It emits a focused beam of white light from a powerful LED, with brightness proportional to its input value — high input means bright...

SKU: MR-CB-KT-INVERSE-1 | Brand: Modular Robotics

The Inverse Cubelet is a "think" block in the Cubelets modular robotics system. It calculates the opposite of the values it receives — averaging its inputs and outputting one minus that average. Use it to create robot...

SKU: MR-BRIGHT | Brand: Modular Robotics

The Brightness Cubelet has an analog photocell that responds to varying light conditions and detects the amount of light hitting it’s sensor. Expect values near zero in a dark room, and values near one when the ...

SKU: MR-CB-KT-DISTANCE-1 | Brand: Modular Robotics

The Distance Cubelet detects how far it is from an object. It uses infrared light and is accurate between 10 and 80 cm. The sensor is directional, so outputs the distance to the object in front of the sensor. At...

SKU: DF-KIT0020 | Brand: DFRobot

An Ultrasonic sensor with scan capability is a must have feature for most robot application. This Ultrasonic scanner kit provides a cost effective way to have such feature for your robot application. This kit is...

SKU: DF-DFR0244-G | Brand: DFRobot

A panel-mount LED current meter that measures 0–9.99 A DC with 2% accuracy. The bright green 3-digit LED display is easy to read, and the meter requires no external circuitry — just connect four wires and it gives a r...

SKU: SF-SEN-11769 | Brand: SparkFun

The Line Follower sensor is an add-on for your RedBot that gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measurin...

SKU: DF-FIT0378 | Brand: DFRobot

Sumo Robots, roll out! Built for Sumo Robot fight, Sumo Bumper for MiniQ 2WD is a quick add-on that turns your miniQ into a sumo fighter. During the game, each little pusher will locate and knock its opponent right o...

SKU: SF-KIT-13053 | Brand: SparkFun

Holy Wattage, Batman! This Power Resistor Kit comes with 5 each of 5 different 10 Watt resistor values including 1, 2, 4, 8, and 16 Ohms. These resistors are capable of dissipating large amounts of power without damag...

SKU: DF-SEN0186 | Brand: DFRobot

INTRODUCTION  Ever want to build your own weather station? This iot weather station kit includess anemometer, wind vane and rain bucket. The serial communication method provides good compatibility and ma...

SKU: SF-PRT-12718 | Brand: SparkFun

PCB mount clip to hold a AAA battery. Sold in single units, you’ll need two for each battery. These work great for small, low power applications that need a battery to run. Low cost and easy to use!Documents:Datasheet