Standoffs & Screws

SKU: AF-4255 | Brand: Adafruit

Brass heat-set inserts provide strong, reusable threaded connections in 3D-printed and injection-moulded plastic parts. Each insert has a knurled outer surface that grips the surrounding plastic when pressed in with a...

SKU: AF-3082 | Brand: Adafruit

A tall-profile aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. The taller 15mm height provides greater surface area for improved heat ...

SKU: AF-4256 | Brand: Adafruit

Wanna improve the connection strength between your project's 3D-printed parts, and also have nice clean surfaces? Instead of gluing bits together, or screwing plastic screws directly into your 3D prints, use strong an...

SKU: AF-3299 | Brand: Adafruit

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the...

SKU: LB-HS4342 | Brand: Little Bird

SKU: DF-FIT0665 | Brand: DFRobot

The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass hexagonal copper columns, for a total of 320 pieces. The M2-size screw set is suitable for motherboards, senso...

SKU: SF-PRT-10571 | Brand: SparkFun

These are simple 2-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. The 2.54mm pitch will line up with standard 0.1" perf boards.Documents: Datasheet

SKU: AF-1178 | Brand: Adafruit

Rollin' rollin' rollin', you can now roll around smooth as silk with these radial bearings. Often referred to as "skate bearings" They're good for supporting a rotating rod or as a wheel hub. However, these are higher...

SKU: AF-550 | Brand: Adafruit

Small self-adhesive rubber bumper feet for electronics boards and devices. Stick them to the bottom of any PCB to protect your desk, prevent sliding, and provide clearance for through-hole solder joints underneath. T...

SKU: SF-PRT-16499 | Brand: SparkFun

A 6-position PCB-mount screw terminal block with 2.54mm (0.1") pitch, compatible with standard perfboard and breadboard spacing. Accepts 30–18AWG wire for secure, solderless connections. Specifications Positions – ...

SKU: AF-2337 | Brand: Adafruit

Finally we get our very own super sweet sixteen... 16 millimeters that is! Our Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT or other Pi accessories w...

SKU: DF-FIT0225 | Brand: DFRobot

A comprehensive mounting kit containing a variety of M3 nylon and copper standoffs, screws, and nuts — all organised in an adjustable 24-compartment parts box. Everything you need to mount circuit boards, build robot ...

SKU: DF-FIT0274 | Brand: DFRobot

A 10-pack of M3 × 20mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: SF-PRT-08432 | Brand: SparkFun

Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 300V @ 8A. Terminal...

SKU: AF-5774 | Brand: Adafruit

The Adafruit Swirly Aluminum Mounting Grid provides a mechanical substrate for mounting small microcontroller boards, sensors, and Feathers that use STEMMA QT plug-and-play connections. When you're snapping boards tog...

SKU: AF-4685 | Brand: Adafruit

A comprehensive 420-piece set of black nylon M3 screws, nuts, and hex standoffs in a reusable storage container. Nylon fasteners are non-conductive, making them ideal for mounting PCBs and breakout boards without inte...

SKU: AF-2336 | Brand: Adafruit

11 millimeters that is! Our Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping the two boards separated, in particular the HDMI port. These...

SKU: DF-FIT0191 | Brand: DFRobot

A compact aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The ad...

SKU: SF-PRT-08433 | Brand: SparkFun

Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 300V @ 8A. Terminal ca...

SKU: DF-FIT0666 | Brand: DFRobot

The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass white nylon columns, for a total of 260 pieces. The M2-size screw set is suitable for motherboards, sensors or...