Standoffs & Screws

SKU: LB-LR0309-36 | Brand: Little Bird

A 120-piece M2.5 brass standoff kit with a mix of female-female spacers, male-female spacers, stainless steel screws, and nuts — all organised in a reusable plastic storage box. M2.5 is the standard mounting size for ...

SKU: LB-PT9053 | Brand: Little Bird

A comprehensive assortment of 600 small stainless steel screws and nuts, perfect for repairing watches, glasses, electronics, and other precision devices. Sizes include M1, M1.2, M1.4, and M1.6 threads. All 12 variet...

SKU: LB-LS0513 | Brand: Little Bird

M3 Nylon Screw Black Hex Screw Nut Nylon PCB Standoff Assortment Kit 250pcs M3*6+6mm        25pcs M3*8+6mm        25pcs M3*10+6mm   &n...

SKU: AF-4255 | Brand: Adafruit

Brass heat-set inserts provide strong, reusable threaded connections in 3D-printed and injection-moulded plastic parts. Each insert has a knurled outer surface that grips the surrounding plastic when pressed in with a...

SKU: AF-3082 | Brand: Adafruit

A tall-profile aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. The taller 15mm height provides greater surface area for improved heat ...

SKU: AF-4256 | Brand: Adafruit

Wanna improve the connection strength between your project's 3D-printed parts, and also have nice clean surfaces? Instead of gluing bits together, or screwing plastic screws directly into your 3D prints, use strong an...

SKU: AF-3299 | Brand: Adafruit

Totaling 380 pieces, this M2.5 Screw Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! M2.5 size screws fit almost all of the...

SKU: LB-HS4342 | Brand: Little Bird

SKU: DF-FIT0665 | Brand: DFRobot

The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass hexagonal copper columns, for a total of 320 pieces. The M2-size screw set is suitable for motherboards, senso...

SKU: LB-LS2429 | Brand: Little Bird

Totalling 1080 pieces, this Stainless Steel Screws and Nuts Set is a must-have for your workstation. You'll have enough screws, nuts, and hex standoffs to fuel your maker tendencies for days on end! These screws will ...

SKU: SF-PRT-10571 | Brand: SparkFun

These are simple 2-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. The 2.54mm pitch will line up with standard 0.1" perf boards.Documents: Datasheet

SKU: AF-1178 | Brand: Adafruit

Rollin' rollin' rollin', you can now roll around smooth as silk with these radial bearings. Often referred to as "skate bearings" They're good for supporting a rotating rod or as a wheel hub. However, these are higher...

SKU: AF-550 | Brand: Adafruit

Small self-adhesive rubber bumper feet for electronics boards and devices. Stick them to the bottom of any PCB to protect your desk, prevent sliding, and provide clearance for through-hole solder joints underneath. T...

SKU: SF-PRT-16499 | Brand: SparkFun

A 6-position PCB-mount screw terminal block with 2.54mm (0.1") pitch, compatible with standard perfboard and breadboard spacing. Accepts 30–18AWG wire for secure, solderless connections. Specifications Positions – ...

SKU: AF-2337 | Brand: Adafruit

Finally we get our very own super sweet sixteen... 16 millimeters that is! Our Black Plated M/F Brass 16mm Standoffs are engineered specifically to keep your PiTFT or other Pi accessories w...

SKU: DF-FIT0225 | Brand: DFRobot

A comprehensive mounting kit containing a variety of M3 nylon and copper standoffs, screws, and nuts — all organised in an adjustable 24-compartment parts box. Everything you need to mount circuit boards, build robot ...

SKU: DF-FIT0274 | Brand: DFRobot

A 10-pack of M3 × 20mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: SF-PRT-08432 | Brand: SparkFun

Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 300V @ 8A. Terminal...

SKU: AF-5774 | Brand: Adafruit

The Adafruit Swirly Aluminum Mounting Grid provides a mechanical substrate for mounting small microcontroller boards, sensors, and Feathers that use STEMMA QT plug-and-play connections. When you're snapping boards tog...

SKU: AF-4685 | Brand: Adafruit

A comprehensive 420-piece set of black nylon M3 screws, nuts, and hex standoffs in a reusable storage container. Nylon fasteners are non-conductive, making them ideal for mounting PCBs and breakout boards without inte...