Standoffs & Screws

SKU: PL-1077 | Brand: Pololu

This M3, pan-head screw is 25 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: SF-PRT-10927 | Brand: SparkFun

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy loo...

SKU: PL-1960 | Brand: Pololu

Steel zinc-plated pan-head Phillips machine screws, #4-40 thread, ¼" (6.35mm) long. Sold in a pack of 25. Ideal for securing PCBs, standoffs, and enclosures in electronics projects. Specifications Thread: #4-40 Le...

SKU: DF-FIT0065 | Brand: DFRobot

A 10-pack of M3 × 6mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking s...

SKU: SF-PRT-25761 | Brand: SparkFun

A compact aluminium heatsink with self-adhesive backing for easy peel-and-stick installation. Efficiently draws heat away from electronic components including ICs, voltage regulators, and processor chips to promote op...

SKU: WS-24985 | Brand: Waveshare

Metal Flat Key Shaft Flange Plate, Suitable For Using with Serial Bus Servo, Compatible With Various Transmission Parts Metal Flat Key Shaft Flange Plate Using with serial bus servo for...

SKU: AF-5051 | Brand: Adafruit

Sleek black anodized aluminum bumper feet with embedded rubber grips for no-slip support. Originally designed for keyboard enclosures, these machined aluminium feet look great on any electronics project, enclosure, or...

SKU: AF-4206 | Brand: Adafruit

These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin so you can solder them in an oven or with a very pow...

SKU: AF-4207 | Brand: Adafruit

These brilliant solder-able standoffs will make your mechanical PCB mounting problems go away. They're super simple - round M3 standoffs that are coated with tin so you can solder them in an oven or with a very powerf...

SKU: AF-1043 | Brand: Adafruit

A compact aluminium heat sink from Cool Innovations, designed for surface-mount components such as SoCs, motor drivers, and other SMT packages. Trusted by engineers for its low cost, ease of use, and excellent thermal...

SKU: AF-1116 | Brand: Adafruit

Board edge mounting standoffs designed to grip standard 1.6 mm (0.062") thick PCBs by the edge or corner — no mounting holes required. An elegant solution for securing boards like the original Raspberry Pi or any PCB ...

SKU: AF-1155 | Brand: Adafruit

A sturdy cast aluminium corner brace for joining 20×20mm aluminium extrusion at 90° angles. Stronger than extruded corner supports, with two mounting holes for a secure connection between extrusion pieces. Key Featur...

SKU: AF-1160 | Brand: Adafruit

Cute as a button, these button-head hex screws are what we suggest for putting together a project with our slotted extruded aluminum. Use a 2.5mm hex wrench to attach/detach. This length is good for attaching somethin...

SKU: SF-PRT-10789 | Brand: SparkFun

Non-conductive nylon nuts in the 4-40 thread size. Ideal for securing PCBs and electronics without the risk of shorting traces or ground planes around mounting holes. Specifications Thread Size – 4-40 Material – N...

SKU: SF-PRT-10232 | Brand: SparkFun

A standard zinc-plated 4-40 UNC hex nut. Suitable for securing 4-40 machine screws in robotics assemblies, electronics enclosures, and prototyping builds. Sold individually. Specifications Thread – 4-40 UNC Materi...

SKU: DF-FIT0183 | Brand: DFRobot

A 10-pack of M3 × 20mm hexagonal standoffs with matching screws and nuts. Use them to mount circuit boards, sensors, and other components with consistent 20mm spacing and secure mechanical support. The male/female de...

SKU: DF-FIT0181 | Brand: DFRobot

This is a high quality 2-pin screw terminal. Very useful when you want to connect 24-18AWG wires to your circuits. SPECIFICATIONS Rated voltage: 300V Rated current: 10A Contact resistence: ...

SKU: DF-FIT0194 | Brand: DFRobot

A 10-pack of M3 × 30mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking ...

SKU: DF-FIT0195 | Brand: DFRobot

A 10-pack of M3 × 6mm clear nylon screws with matching nuts. Transparent and non-conductive, these fasteners are ideal for applications requiring electrical insulation, corrosion resistance, and a clean visual appeara...

SKU: AF-2392 | Brand: Adafruit

Whaddya got a screw loose or something?This 3/8" to 1/4" Adapter Screw is super handy if you're building projects that connect to a tripod or a camera. It's a simple fix for getting a tripod with a 1/4" machine screw ...