Standoffs & Screws

SKU: AF-1493 | Brand: Adafruit

A compact aluminium heat sink designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Its small footprint and tall fin design provide effective thermal dissi...

SKU: AF-2336 | Brand: Adafruit

11 millimeters that is! Our Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping the two boards separated, in particular the HDMI port. These...

SKU: DF-FIT0191 | Brand: DFRobot

A compact aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The ad...

SKU: SF-PRT-08433 | Brand: SparkFun

Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 300V @ 8A. Terminal ca...

SKU: DF-FIT0666 | Brand: DFRobot

The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass white nylon columns, for a total of 260 pieces. The M2-size screw set is suitable for motherboards, sensors or...

SKU: AF-1434 | Brand: Adafruit

A two-piece adjustable mount from Pimoroni for the Raspberry Pi Camera Module. The design allows multiple angle positions and includes a 1/4"-20 threaded hole for attaching to a standard camera tripod. Compatible wit...

SKU: AF-3658 | Brand: Adafruit

A comprehensive 420-piece white nylon screw and standoff set in M2.5 thread — the standard mounting size for most breakout boards, development boards, and single-board computers including Raspberry Pi, Feather, and si...

SKU: AF-1515 | Brand: Adafruit

A 10-pack of ultra-low-profile aluminium heat sinks designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Their tiny footprint and minimal height make them...

SKU: DF-FIT0184 | Brand: DFRobot

A 10-pack of M3 × 30mm hexagonal standoffs with matching screws and nuts. Use them to mount circuit boards, sensors, and other components with consistent 30mm spacing and secure mechanical support. The male/female de...

SKU: DF-FIT0224 | Brand: DFRobot

This mounting kit provides you different types of screws and nuts which are most commonly used in our projects here at DFRobot. We use them to mount circuit boards and help build robots. These screws and nuts ...

SKU: DF-FIT0270 | Brand: DFRobot

A 10-pack of M3 × 10mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: DF-FIT0269 | Brand: DFRobot

A 10-pack of M3 × 30mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: AF-3083 | Brand: Adafruit

A compact aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. Simply peel off the protective film and press firmly onto the processor — no...

SKU: PL-1076 | Brand: Pololu

This M3, pan-head screw is 8 mm long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: PL-1962 | Brand: Pololu

This #4-40, pan-head screw is 1/2″ (0.5″) long. It is made from steel, is zinc-plated, and comes in packs of 25.

SKU: AF-3816 | Brand: Adafruit

This bolt-on hardware kit provides M3 standoffs and screws for securely mounting a Circuit Playground Express, Circuit Playground Classic, micro:bit, Gemma M0, Flora, or other small circular/compact boards to your pro...

SKU: DF-FIT0182 | Brand: DFRobot

A 10-pack of M3 × 20mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking ...

SKU: DF-FIT0280 | Brand: DFRobot

A 10-pack of M3 × 12mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: SF-PRT-08235 | Brand: SparkFun

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal ...

SKU: SF-PRT-08084 | Brand: SparkFun

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal ...