Standoffs & Screws

SKU: LB-HS4342 | Brand: Little Bird

SKU: SF-PRT-10571 | Brand: SparkFun

These are simple 2-position screw terminals with 2.54mm pitch pins. Rated up to 150V @ 6A, this terminal can accept 30 to 18AWG wire. The 2.54mm pitch will line up with standard 0.1" perf boards.Documents: Datasheet

SKU: AF-1178 | Brand: Adafruit

Rollin' rollin' rollin', you can now roll around smooth as silk with these radial bearings. Often referred to as "skate bearings" They're good for supporting a rotating rod or as a wheel hub. However, these are higher...

SKU: AF-550 | Brand: Adafruit

Small self-adhesive rubber bumper feet for electronics boards and devices. Stick them to the bottom of any PCB to protect your desk, prevent sliding, and provide clearance for through-hole solder joints underneath. T...

SKU: SF-PRT-16499 | Brand: SparkFun

A 6-position PCB-mount screw terminal block with 2.54mm (0.1") pitch, compatible with standard perfboard and breadboard spacing. Accepts 30–18AWG wire for secure, solderless connections. Specifications Positions – ...

SKU: SF-PRT-08432 | Brand: SparkFun

Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 300V @ 8A. Terminal...

SKU: AF-5774 | Brand: Adafruit

The Adafruit Swirly Aluminum Mounting Grid provides a mechanical substrate for mounting small microcontroller boards, sensors, and Feathers that use STEMMA QT plug-and-play connections. When you're snapping boards tog...

SKU: AF-2336 | Brand: Adafruit

11 millimeters that is! Our Black Plated M/F Brass Standoffs are engineered specifically to keep your Pi HAT snug on your Pi while also keeping the two boards separated, in particular the HDMI port. These...

SKU: DF-FIT0191 | Brand: DFRobot

A compact aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. The ad...

SKU: SF-PRT-08433 | Brand: SparkFun

Screw Terminals with 5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 300V @ 8A. Terminal ca...

SKU: AF-1434 | Brand: Adafruit

A two-piece adjustable mount from Pimoroni for the Raspberry Pi Camera Module. The design allows multiple angle positions and includes a 1/4"-20 threaded hole for attaching to a standard camera tripod. Compatible wit...

SKU: AF-1515 | Brand: Adafruit

A 10-pack of ultra-low-profile aluminium heat sinks designed for surface-mount components such as SoCs, motor drivers, linear regulators, FETs, and other SMT packages. Their tiny footprint and minimal height make them...

SKU: DF-FIT0270 | Brand: DFRobot

A 10-pack of M3 × 10mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: DF-FIT0269 | Brand: DFRobot

A 10-pack of M3 × 30mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: AF-3083 | Brand: Adafruit

A compact aluminium heatsink with pre-applied thermal adhesive for easy installation on the Raspberry Pi 3 and other single board computers. Simply peel off the protective film and press firmly onto the processor — no...

SKU: AF-3816 | Brand: Adafruit

This bolt-on hardware kit provides M3 standoffs and screws for securely mounting a Circuit Playground Express, Circuit Playground Classic, micro:bit, Gemma M0, Flora, or other small circular/compact boards to your pro...

SKU: DF-FIT0182 | Brand: DFRobot

A 10-pack of M3 × 20mm nylon standoffs with matching screws and nuts. Nylon standoffs are non-conductive, making them ideal for isolating circuit boards from metal chassis or other conductive surfaces without risking ...

SKU: DF-FIT0280 | Brand: DFRobot

A 10-pack of M3 × 12mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: SF-PRT-08084 | Brand: SparkFun

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you need (4, 5, up to 20 without problems). Rated up to 125V @ 6A. Terminal ...

SKU: SF-PRT-10927 | Brand: SparkFun

These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy loo...