Speakers

SKU: EF-EF04031 | Brand: ElecFreaks

The Octopus Passive Buzzer Brick is a plug-and-play buzzer module from the Elecfreaks Octopus series. Unlike an active buzzer, the passive design lets you control both tone and volume via PWM, making it ideal for gene...

SKU: SF-COM-15350 | Brand: SparkFun

If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.5W, 8Ohm speaker is only 40mm in diameter and just over 4mm thick, the same kind you might find in o...

SKU: SF-COM-27247 | Brand: SparkFun

A compact through-hole speaker that solders directly to your PCB. When you need better audio quality than a piezo buzzer but don't have room for a full-sized speaker, this 30mm unit hits the sweet spot – clear enough ...

SKU: AF-4367 | Brand: Adafruit

The TFT Gizmo adds a vibrant 1.54" colour display and audio output to your Circuit Playground board. It bolts directly onto the back of your Circuit Playground using M3 standoffs that provide both mechanical support a...

SKU: PR-PIM402 | Brand: Little Bird

This handy little speaker with onboard analogue amplifier works great with micro:bit, and it's sewable and croc-clippable!We use this little speaker in our MINI.MU kits, and it's an ideal way to add some sound to your...

SKU: KI-46124 | Brand: Kitronik

The MonkMakes Speaker Board is a compact, amplified speaker designed for the BBC micro:bit. Simply connect it with crocodile clips and start adding sound to your micro:bit projects — despite its small size, the speake...

SKU: LB-LS8359 | Brand: Little Bird

Add straightforward sound output to your electronics project with this 3W speaker fitted with an XH2.54 wired connection.It is a handy choice for maker builds that need basic audio alerts or playback, including small ...

SKU: PR-PIM485 | Brand: Little Bird

Pump out some mini beats with Pirate Audio Speaker! This diminutive sound system has an I2S DAC, amp, mini mono speaker, high-res display, and playback control buttons. Pirate Audio Speaker is perfect for making a ...

SKU: PI-COM1600 | Brand: Pimoroni

A 3-inch (77.8 mm) full-range speaker rated at 5 W with a 4 Ω impedance. Compact enough to embed in custom enclosures, arcade cabinets, internet radio builds, and other audio projects. Key Features 5 W Power – Soli...

SKU: LB-PT-30AUG | Brand: Little Bird

Introducing our 2-Inch 4-Ohm 3W Full Range Mini Speaker for Stereo Loudspeaker Box DIY Enthusiasts Unleash the power of crystal-clear sound with our 2-inch 4-ohm 3W Full Range Mini Speaker, the ultimate DIY access...

SKU: AF-3968 | Brand: Adafruit

Hear the good news! This speaker is a great addition to any audio project where you need a 4 Ohm impedance and 3W or less of power. At 40mm diameter it has a more square-ish shape, but a smaller face. Sound quality...

SKU: PI-MNK00060 | Brand: Pimoroni

The MonkMakes Speaker for micro:bit is a compact, amplified speaker that connects to your micro:bit using alligator clips. It's the easiest way to add sound output to your micro:bit projects — just clip on and start c...

SKU: LB-RECORD | Brand: Little Bird

Experience cutting-edge technology with our innovative sound-enhanced motion sensor device. Here's what sets it apart: Key Features: Advanced Motion Detection: Incorporates a high-quality external PIR motion ...

SKU: AF-4445 | Brand: Adafruit

A compact 2.8" × 1.2" enclosed mono speaker delivering clear audio output at 3W and 4 ohm impedance. The sealed enclosure provides improved sound quality and volume compared to bare speaker drivers of a similar size. ...

SKU: AF-1759 | Brand: Adafruit

Mod your stuffed toy to chirp, meow, or woof! This GEMMA parts pack makes it easy to add simple sounds to any plush toy, and especially the Sew-Your-Own Owl Kit (not included!) A tilt ball switch is used to trigger...

SKU: PR-PIM484 | Brand: Little Bird

Bring an old radio or set of speakers into the 21st century with Pirate Audio 3W Stereo Amp for Raspberry Pi! Get punchy digital audio through the push-fit terminals and control your music with the&nbsp...

SKU: PR-PIM350 | Brand: Little Bird

We designed this speaker kit as an add-on to our Pirate Radio Kit, for stereo sound, but it'll work with any small audio board that you want to add a speaker to. The kit comes with everything you need to put i...

SKU: PR-PIM263 | Brand: Little Bird

Turn your Pi into a Lilliputian ghetto blaster with Speaker pHAT!Speaker pHAT crams an I2S DAC and mono amplifier, a tiny 8Ω 2W speaker, and a 10 LED bar graph all onto one teeny little pHAT. It's the neatest way...

SKU: PR-PIM254 | Brand: Little Bird

Turn your Pi into a Lilliputian ghetto blaster with Speaker pHAT!Speaker pHAT crams an I2S DAC and mono amplifier, a tiny 8Ω 2W speaker, and a 10 LED bar graph all onto one teeny little pHAT. It's the neatest way...

SKU: PR-PIM261 | Brand: Little Bird

A complete internet radio project kit based on the Raspberry Pi Zero W. Includes a Pi Zero W, the pHAT BEAT DAC and stereo amplifier, a 5W speaker, and a retro-styled blue acrylic enclosure. Assembly takes approximate...