SparkFun

SKU: SF-WRL-09232 | Brand: SparkFun

This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth, Nordic, or XBee) or interface cables and will allow you to use an ant...

SKU: SF-WRL-09233 | Brand: SparkFun

The SMA Male to RP-SMA Male Adapter converts between SMA and RP-SMA connector types, making it easy to pair antennas and cables that use different threading configurations. One end features a standard SMA male connect...

SKU: SF-ROB-09238 | Brand: SparkFun

This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a Bipolar Motor. Features: Step Angle (degrees) :1.8 2 Phase Rated Voltage : 12V Rated Current : 0.33A Holding Torque : 2.3k...

SKU: SF-ROB-12285 | Brand: SparkFun

This compact micro gearmotor features a full metal gear train with a 298:1 ratio, delivering high torque in a small form factor. Operating from 6–12V, it provides up to 90 RPM and 70 oz·in of stall torque, making it i...

SKU: SF-TOL-14235 | Brand: SparkFun

The Xcelite 8-in-1 Screwdriver Set provides eight high-quality bits in a single ergonomic tool. Each bit is easily accessible with a spring-loaded magnetic housing that holds the seven included bits you aren’t current...

SKU: SF-COM-09179 | Brand: SparkFun

A 33 mm round momentary pushbutton in arcade style with a convex green cap. Features a simple screw-in design for easy panel mounting — ideal for arcade builds, interactive projects, and control panels. Specification...

SKU: SF-PRT-09174 | Brand: SparkFun

These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snug...

SKU: SF-TOL-14223 | Brand: SparkFun

This is a set of nine high-quality hex keys from Allen. Each key in this set is equipped with a ball end, allowing an entry angle up to 25° in the screw to work in hard-to-reach areas. These specific keys utilize the ...

SKU: SF-GPS-09123 | Brand: SparkFun

This is a 1 foot long JST SH communication cable which can be cut and hacked to your needs. Ideal if you have a UAV project where the GPS module may be a distance away from the controller board. Cable has two 6-pin JS...

SKU: SF-GPS-09129 | Brand: SparkFun

Communication cable, 1 foot in length, that connects with the EM408. The EM408 GPS modules come with a cable. Cable has two a 5-pin JST connectors with 1mm pitch. Wired pin 1 to pin 1.

SKU: SF-COM-09120 | Brand: SparkFun

This is the knob that connects to the linear slide potentiometer. Knob has a nice friction fit onto slide.Documents: Datasheet

SKU: SF-COM-14197 | Brand: SparkFun

The Clincher connector from Amphenol FCI provides a quick, tool-free way to terminate Flat Flexible Cables (FFCs) to standard 0.1" pin headers. Simply insert the end of the cable into the connector and press it closed...

SKU: SF-KIT-14180 | Brand: SparkFun

Robots are fun, and Arduinos are easy. So wouldn’t it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The SparkFun Ardumoto ...

SKU: SF-ROB-12205 | Brand: SparkFun

This micro gearmotor features full metal gears for exceptional durability and a 150:1 gear ratio that delivers up to 175 RPM at 12V with 45 oz-in of stall torque. The compact form factor and 3mm D-shaft make it ideal ...

SKU: SF-CAB-14166 | Brand: SparkFun

A pair of 24 AWG wires, each terminated with a female insulated spade connector at one end and a braided wire lead at the other. At 0.9 m (3 ft) long and rated for up to 300 VDC, these versatile cables are suitable fo...

SKU: SF-DEV-14134 | Brand: SparkFun

The Arduino Industrial 101 is a compact WiFi evaluation board based on the Arduino 101 LGA module. Combining an ATmega32U4 microcontroller with an Atheros AR9331 MIPS Linux processor, it provides a powerful platform f...

SKU: SF-PRT-08870 | Brand: SparkFun

These 33mm (1.3") spring loaded pogo pins are great for programming and applications where you don’t always want headers soldered onto your boards. We use them for our programming jigs in production. The pins fit snug...

SKU: SF-PRT-08866 | Brand: SparkFun

Standard 22 AWG stranded hook-up wire in white. Stranded wire is more flexible than solid core, making it ideal for projects where the wire needs to bend or will be subject to repeated movement and stress. Specificat...

SKU: SF-PRT-08865 | Brand: SparkFun

Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Comes in small spools of 25'.

SKU: SF-DEV-14129 | Brand: SparkFun

The Ardumoto Shield is a dual-motor controller for Arduino based on the L298 H-bridge. It can drive two DC motors at up to 2A per channel, making it an excellent platform for RC vehicles and small autonomous robots. ...