SparkFun

SKU: SF-COM-11452 | Brand: SparkFun

These color-changing LEDs take the work out of creating crazy, flashy, blinky… ness. Simply apply power and the LED will cycle through the RGB colorspace: no external controller necessary! These bright and festive LED...

SKU: SF-COM-11275 | Brand: SparkFun

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal micro...

SKU: SF-COM-11274 | Brand: SparkFun

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal micro...

SKU: SF-DEV-10899 | Brand: SparkFun

The LilyTiny is a compact LilyPad board with a built-in ATtiny85 microcontroller that drives four pre-programmed LED patterns. Simply sew on four LEDs and connect a battery — no programming or main board required. Ea...

SKU: SF-PRT-10811 | Brand: SparkFun

This DC power jack/connector is just like the other one that we carry except that it’s terminated with breadboard-friendly pins instead of wide solder terminals. These are also compatible with our DC wall supplies and...

SKU: SF-COM-12986 | Brand: SparkFun

We know these look like a lot of our other LEDs, but they’re not! These are PTH Addressable RGB LEDs with a WS2812 control IC built right into the them. This PTH version is incredibly similar to its SMD cousin, except...

SKU: SF-ROB-10398 | Brand: SparkFun

This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. We even used one to make our very own universal gripper using coffee grounds, balloon and some other parts. F...

SKU: SF-PRT-10288 | Brand: SparkFun

This adapter allows you to connect a barrel jack connector to bare wires. One end has screw terminals and the other has a 5.5x2.1mm, center-positive female barrel jack. If you have a power supply with a barrel jack an...

SKU: SF-WRL-18087 | Brand: SparkFun

This adhesive, dual band antenna is perfect for situations when you're trying to get a signal out from a transmitter that you've jammed down into an enclosure. Operating on the 2.4GHz or 5.8GHz band, it works great fo...

SKU: SF-BOB-16446 | Brand: SparkFun

The SparkFun Qwiic micro:bit Breakout is a board that connects to the BBC micro:bit and expands the capabilities of the development platform by providing access to more pins and allowing for connections to the I2C and...

SKU: SF-WRL-17146 | Brand: SparkFun

The ESP8266 WiFi Module is a self contained SOC with integrated TCP/IP protocol stack that can give any microcontroller access to your WiFi network. The ESP8266 is capable of either hosting an application or offloa...

SKU: SF-SEN-14727 | Brand: SparkFun

This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 100g of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that cha...

SKU: SF-WRL-14875 | Brand: SparkFun

A compact 1/4-wave rubber duck antenna for LoRa and other 860–960MHz communication. With a centre frequency of 915MHz and 2dBi gain, this 110mm antenna is ideal for space-constrained LoRa nodes where a smaller antenna...

SKU: SF-TOL-08639 | Brand: SparkFun

A USB-A to 5.5 × 2.1 mm barrel jack adapter cable for powering development boards and small devices from any USB port. Centre-positive polarity, delivering up to 5 V at 500 mA (per USB specification). Specifications ...

SKU: SF-ROB-08449 | Brand: SparkFun

A vibration motor! This itty-bitty, shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protecte...

SKU: SF-DEV-14014 | Brand: SparkFun

This is a simple pack of five Yellow LilyPad LEDs that are still attached to one another, letting you snap the LEDs apart at your leisure to sew into clothing or whatever else you can dream up.LilyPad is a wearable e-...

SKU: SF-ROB-13302 | Brand: SparkFun

These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and easy-to-use setup to get your wheels turning. Each Hobby Gearmotor als...

SKU: SF-DEV-11114 | Brand: SparkFun

It’s blue! It’s thin! It’s the Arduino Pro Mini! SparkFun’s minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz bootloader. Arduino Pro Mini does not come with connectors populated so tha...

SKU: SF-PRT-12978 | Brand: SparkFun

A pack of 10 multicoloured alligator-to-alligator clip test leads — an essential for any electronics workbench. Whether you're making quick connections to test a circuit or extending your multimeter leads, these sprin...

SKU: SF-COM-10632 | Brand: SparkFun

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow.