SparkFun

SKU: SF-TOL-15295 | Brand: SparkFun

One ruler to rule them all. This is a basic 12 inch ruler, but made from a PCB. We have included a lots of useful information on each side of the ruler that you might use on a daily basis including Wire Gauge holes, t...

SKU: SF-LCD-15143 | Brand: SparkFun

The SparkFun TFT LCD Breakout features a 1.8″ colour display with 128 × 160 pixel resolution and a 4-wire SPI interface. A built-in microSD card holder on the same SPI bus provides storage for images and multimedia fi...

SKU: SF-GPS-15210 | Brand: SparkFun

The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positi...

SKU: SF-GPS-15193 | Brand: SparkFun

The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constella...

SKU: SF-SEN-14722 | Brand: SparkFun

This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X uses a VCSEL (V...

SKU: SF-SPX-14669 | Brand: SparkFun

The SparkFun BlackBoard is an Arduino Uno-compatible development board with a range of improvements over the standard Uno. It features the CH340G USB-to-serial converter for broad driver compatibility, a reinforced th...

SKU: SF-SEN-14599 | Brand: SparkFun

The LIDAR-Lite v3HP is a compact, high-performance optical distance measurement sensor from Garmin. Housed in a durable IPX7-rated enclosure, it delivers accurate range measurements from 5 cm to 40 m, making it an ide...

SKU: SF-ROB-14760 | Brand: SparkFun

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is able to take in 6 volts and deliver 44.4 oz-in. of maximum torque at 0.18 sec/60° This is a small servo with a standard 3 p...

SKU: SF-KIT-14719 | Brand: SparkFun

Do you own a micro:bit or micro:bit Go Bundle and want to expand your skills with the new microcontroller? You are in luck! The SparkFun Inventor’s Kit Bridge Pack for micro:bit was designed to provide you with a...

SKU: SF-SEN-15244 | Brand: SparkFun

The Bend Labs Digital Flex Sensors are an innovative solution for measuring motion, providing a unique alternative to existing sensor technologies for measuring a highly accurate and drift-free angular displacement in...

SKU: SF-COM-14977 | Brand: SparkFun

A convenient pack of 20 assorted 5mm LEDs with built-in resistors — no need to calculate or add external current-limiting resistors. Simply connect to 3.0–5.0V and you're ready to go, making these perfect for quick pr...

SKU: SF-DEV-14629 | Brand: SparkFun

The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shi...

SKU: SF-COM-15036 | Brand: SparkFun

The Bourns Absolute Encoder is a digital control knob that provides 128 unique results evenly spaced around a full circle. It is designed as a control panel knob but can be adapted for other uses. This can be a good a...

SKU: SF-DEV-13820 | Brand: SparkFun

The SparkFun ProtoShield Kit lets you customize your own Arduino shield using whatever circuit you can come up with and then test it to make sure everything is working the way it should! The SparkFun ProtoShield Kit i...

SKU: SF-COM-14889 | Brand: SparkFun

A replacement knob for small and medium sized linear slide potentiometers. The knob attaches via friction fit onto the slide pot's slider, providing a more comfortable and precise control surface for your project. Ke...

SKU: SF-COM-14561 | Brand: SparkFun

You don’t have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 yellow 5mm LEDs will help alleviate any frustrations you’ve had with accidentally burning them out ...

SKU: SF-COM-14562 | Brand: SparkFun

Blue 5 mm LEDs with a built-in current-limiting resistor. No external resistor needed — simply connect to 3.0–5 V and the integrated resistor prevents burnout. Packaged in reusable ESD-safe bags. Specifications Siz...

SKU: SF-COM-14560 | Brand: SparkFun

You don’t have to worry about adding a resistor to an LED if you get an LED with a built in resistor! This pack of 25 red 5mm LEDs will help alleviate any frustrations you’ve had with accidentally burning them out by ...

SKU: SF-CAB-14909 | Brand: SparkFun

USB C is quickly becoming more and more prominent in the maker community because, let’s be honest, who likes trying three times to insert USB into a port? This FTDI cable is a USB C to Serial converter which allows fo...

SKU: SF-CAB-14724 | Brand: SparkFun

This is a USB 3.0 type A to Micro-B cable. If you’re unfamiliar, this isn’t your typical micro USB cable, boasting a data transfer rate of up to 5GB/s making it a “SuperSpeed” USB option. This connector type is less c...