SparkFun
Shop SparkFun Electronics products at Little Bird Electronics, Australia's trusted source for maker and electronics supplies. Browse our range of SparkFun development boards, Qwiic modules, sensors, displays, and accessories — all designed for easy prototyping and learning.
Whether you're building IoT projects, teaching STEM in the classroom, or prototyping professionally, SparkFun's well-documented ecosystem makes getting started straightforward. Fast shipping across Australia.
SparkFun ProDriver - Stepper Motor Driver (TC78H670FTG)
SKU: SF-ROB-16836 | Brand: SparkFun
The SparkFun ProDriver makes it easy to start developing with the TC78H670FTG bipolar stepper motor driver from Toshiba! Latch terminals provide instant solder-less connections to every feature offered. Use our extens...
Delivered by Mon 22 Jun
TFMini-S - Micro LiDAR Module
SKU: SF-SEN-16977 | Brand: SparkFun
The TFMini-S Micro LiDAR Module is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 10 centimeters (+/- 6cm up to 6m) and as far as 12 meters (+/-1% starting at 6m)! As wi...
Delivered by Mon 22 Jun
SparkFun Qwiic Thermocouple Amplifier - MCP9600 (PCC Connector)
SKU: SF-SEN-16294 | Brand: SparkFun
The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...
Delivered by Mon 22 Jun
Board to Board Double Slot Male Connector - 50 pin, 0.5mm
SKU: SF-PRT-16891 | Brand: SparkFun
This surface-mount 50-pin board-to-board connector with 0.5 mm pitch and double-slot male configuration is used on Alchitry FPGA boards. Soldered to the underside of a board, these connectors allow Alchitry FPGA board...
Delivered by Mon 22 Jun
SparkFun Digital Temperature Sensor - TMP102 (Qwiic)
SKU: SF-SEN-16304 | Brand: SparkFun
The SparkFun TMP102 Qwiic breakout provides accurate digital temperature readings over I2C with minimal wiring. Based on the Texas Instruments TMP102, the sensor delivers 0.0625 °C resolution and ±0.5 °C accuracy, com...
Delivered by Mon 22 Jun
Board to Board Double Slot Female Connector - 50 pin, 0.5mm
SKU: SF-PRT-16890 | Brand: SparkFun
These are the surface mount 50 pin 0.5mm Board to Board Double Slot Female Connectors found on the Alchitry FPGA boards. These headers allow for Alchitry FPGA Boards to stack on one another by being soldered to the to...
Delivered by Mon 22 Jun
SparkFun Humidity Sensor Breakout - SHTC3 (Qwiic)
SKU: SF-SEN-16467 | Brand: SparkFun
Looking to keep a log of the climate in your greenhouse, create a humidor control system or want to track temperature and humidity data for a weather station project? The SparkFun SHTC3 Humidity Sensor may be the perf...
Delivered by Mon 22 Jun
SparkFun Photodetector Breakout - MAX30101 (Qwiic)
SKU: SF-SEN-16474 | Brand: SparkFun
The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout includes the MAX30101, a highly sensitive optical sensor and successor to the MAX30105 and MAX30102. The MAX30101 Brea...
Delivered by Mon 22 Jun
SparkFun GPS Breakout - NEO-M9N, U.FL (Qwiic)
SKU: SF-GPS-15712 | Brand: SparkFun
The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the ...
Delivered by Mon 22 Jun
SparkFun GPS Dead Reckoning Breakout - NEO-M8U (Qwiic)
SKU: SF-GPS-16329 | Brand: SparkFun
The SparkFun NEO-M8U GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M8U takes advantage of u-blox's Untethered Dead Reckoning (UDR) technology. The module provides con...
Delivered by Mon 22 Jun
SparkFun Qwiic Shield for Thing Plus
SKU: SF-DEV-16790 | Brand: SparkFun
The SparkFun Qwiic Shield for Thing Plus adds four Qwiic connectors (two horizontal, two vertical) to any Thing Plus or Adafruit Feather-format development board. It breaks out the I²C bus (GND, 3.3 V, SDA, SCL) to st...
Delivered by Mon 22 Jun
Jumper Wires Premium 6in. M/M - 2 Pack (Red and Black)
SKU: SF-PRT-16662 | Brand: SparkFun
A 2-pack of premium 6" male-to-male jumper wires in red and black — handy for power and ground connections where colour coding matters. Stranded core for flexibility with solid male pins on both ends for a reliable fi...
Delivered by Mon 22 Jun
Poke Home Connector - 2-Pin
SKU: SF-PRT-16538 | Brand: SparkFun
Poke Home Connectors have been featured on a number of our boards over the last few years by providing a simple screw-terminal-type connector for easy wire connection purposes. Similar to screw terminals, Poke Home Co...
Delivered by Mon 22 Jun
Leopard Imaging Camera - 136 Degree FOV
SKU: SF-DEV-16260 | Brand: SparkFun
The Leopard Imaging Camera is a wide-angle camera module designed specifically for the NVIDIA Jetson Nano Developer Kit. With a 136° field of view, Sony IMX219 8.08 MP colour sensor, and CSI-2 MIPI 2-lane interface, i...
Delivered by Mon 22 Jun
SparkFun controller:bit - micro:bit Carrier Board (Qwiic)
SKU: SF-DEV-16129 | Brand: SparkFun
The SparkFun controller:bit is a fun-filled "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional controller system. Designed in a similar form factor to the cl...
Delivered by Thu 11 Jun
Latch Terminals - 5mm Pitch (4-Pin)
SKU: SF-PRT-15900 | Brand: SparkFun
You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...
Delivered by Mon 22 Jun
Latch Terminals - 5mm Pitch (3-Pin)
SKU: SF-PRT-15899 | Brand: SparkFun
You'll have no need for a screwdriver with this terminal! This is a 3-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...
Delivered by Mon 22 Jun
Latch Terminals - 5mm Pitch (2-Pin)
SKU: SF-PRT-15898 | Brand: SparkFun
You'll have no need for a screwdriver with this terminal! This is a 2-pin Latch Terminal with 5mm pitch pins. Each pin is rated up to 250V @ 11A and will line up well with the standard 0.1" spacing. Please note that t...
Delivered by Mon 22 Jun
SparkFun OpenLog with Headers
SKU: SF-DEV-13955 | Brand: SparkFun
The SparkFun OpenLog with Headers is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. The OpenLog can store or "log" huge amounts of serial data and act as a...
Delivered by Mon 22 Jun
SparkFun Power Delivery Board - USB-C (Qwiic)
SKU: SF-DEV-15801 | Brand: SparkFun
The SparkFun Power Delivery Board uses the STMicroelectronics STUSB4500 controller to negotiate USB Power Delivery (PD) contracts with compatible chargers and adapters. Instead of being limited to 5 V from a standard ...
Delivered by Mon 22 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
