SparkFun

SKU: SF-COM-08285 | Brand: SparkFun

A pack of super bright green LEDs in the standard 5 mm (T1¾) package with clear lenses. At 12,000 mcd, these LEDs deliver exceptional brightness suitable for indicators, lighting effects, and high-visibility projects....

SKU: SF-COM-00107 | Brand: SparkFun

This is the basic L7805 voltage regulator, a three-terminal positive regulator with a 5V fixed output voltage. This fixed regulator provides a local regulation, internal current limiting, thermal shut-down control,...

SKU: SF-COM-10803 | Brand: SparkFun

PICAXE-08M2 microcontroller chip. PICAXE is a neat entry-level microcontroller system that is relatively cheap to get started with. The chip is programmed with a simple serial connection and the BASIC development e...

SKU: SF-COM-09590 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very basic 5mm LED with a red lens. It has a typical forward voltage of 2.0V and...

SKU: SF-PRT-17912 | Brand: SparkFun

This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. The cable insulation is made from a highly malleable material maki...

SKU: SF-WRL-17841 | Brand: SparkFun

A compact wide-band internal antenna covering 700–2700 MHz, suitable for 4G LTE, LoRa, BLE, and other RF applications. The FPC radiator element connects via a 100mm coaxial cable with an IPEX (u.FL equivalent) connect...

SKU: SF-PRT-14492 | Brand: SparkFun

These are your run-of-the-mill ¼ Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and other prototyping applications, these 1K ohm resistors make excellent pull-ups, pull-downs and current limiters....

SKU: SF-ROB-14391 | Brand: SparkFun

This is an easy-to-assemble pan/tilt bracket kit that utilizes servos to move on two axes fit for camera and helping-hand applications. This particular bracket kit is the same one we use in our SparkFun Raspberry P...

SKU: SF-COM-09190 | Brand: SparkFun

This is a standard 12mm square momentary button. What we really like is the large button head and good tactile feel (it ‘clicks’ really well). This button is great for user input on a PCB or a good, big reset button o...

SKU: SF-TOL-09161 | Brand: SparkFun

This is your basic spool of leaded solder with a 63/37 water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder....

SKU: SF-DEV-08776 | Brand: SparkFun

We designed this board to give the user a low profile button without any sharp edges. Button closes when you push it and opens when you release (momentary push button).LilyPad is a wearable e-textile technology develo...

SKU: SF-PRT-12047 | Brand: SparkFun

This black Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jumper...

SKU: SF-COM-12062 | Brand: SparkFun

We all know that you can never get too many LEDs. Don’t worry, we’ve got you covered. This is a pack of basic red, yellow, blue and green 5mm LEDs (5 of each) all conveniently packaged in a nice reusable ESD safe bag.

SKU: SF-PRT-12046 | Brand: SparkFun

This green Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jumper...

SKU: SF-COM-00526 | Brand: SparkFun

The LD1117V33 is a low-dropout (LDO) positive voltage regulator with a fixed 3.3V output. With on-chip trimming providing ±1% output voltage tolerance and built-in current and thermal limiting, it's a reliable choice ...

SKU: SF-DEV-10867 | Brand: SparkFun

This is 30 feet of conductive thread spun from stainless steel fiber and wound on a plastic bobbin. Use it to sew up all of your e-textile projects. This small bobbin is a great way to get into wearable electronics...

SKU: SF-SEN-10293 | Brand: SparkFun

A simple piezo element that can be used as both a sensor and a small audio transducer. When flexed or tapped, it generates a voltage that can be read by a microcontroller, making it ideal for knock and vibration detec...

SKU: SF-ROB-15324 | Brand: SparkFun

Does controlling door and cabinet access with the power of Electromagnetism interest you? Excellent! In effect, this latch / lock solenoid is an electronic lock. When powered with 12VDC source, the latch is pulled in,...

SKU: SF-PRT-14491 | Brand: SparkFun

A pack of 20 through-hole 10 kΩ resistors with thick leads designed for a snug fit in solderless breadboards. These are standard ¼ W, ±5% tolerance PTH resistors — ideal for pull-ups, pull-downs, current limiting, and...

SKU: SF-COM-13834 | Brand: SparkFun

Cherry MX Keyswitches are top-of-the-line mechanical keyboard switches. They’re satisfyingly “clicky”, reliable up to tens-of-millions of key presses, and a standard in gaming and programming keyboards across...