SparkFun

SKU: SF-ROB-11015 | Brand: SparkFun

Solenoids are a great way to induce linear motion for pushing, pulling or controlling switches and levers. This smaller solenoid is designed to work directly with 5V which makes it a great match for embedded projects....

SKU: SF-COM-00097 | Brand: SparkFun

We use these little buttons on everything! These Miniature Single Pole Single Throw switches have a good click to them and are breadboard friendly. Perfect as a tactile reset switch. These buttons are rated up to 5...

SKU: SF-COM-18488 | Brand: SparkFun

This is a tiny USB Microphone from Kinobo that plugs into your laptop, desktop, Raspberry Pi, Jetson Nano Dev kit, anything with a USB port you may be using as a computer to add microphone functionality. There is n...

SKU: SF-PRT-12045 | Brand: SparkFun

This blue Mini Breadboard is a great way to prototype your small projects! With 170 tie points there’s just enough room to build and test simple circuits; They’re also great for breaking out DIP package ICs to jumper ...

SKU: SF-TOL-18627 | Brand: SparkFun

An 8-channel USB logic analyser with sampling rates up to 24 MHz, ideal for debugging UART, I2C, SPI, and other digital communication protocols. Compatible with both 3.3 V and 5 V logic levels and powered directly via...

SKU: SF-CAB-10646 | Brand: SparkFun

Ribbon cable is really helpful in situations where you need to make a lot of connections without a big mess of wires. Nothing makes a project look more finished than a nice clean wiring harness. This is a 15ft. len...

SKU: SF-COM-09939 | Brand: SparkFun

An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND to the other, and the center pin will have a voltage that varies f...

SKU: SF-ROB-11696 | Brand: SparkFun

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things like making a fan or spinning something pretty fast without much res...

SKU: SF-PRT-12795 | Brand: SparkFun

These are 6" long jumper wires with male connectors on both ends. Use these to jumper from any female header on any board, to any other female header. Combine these with our female to female jumpers to create a mal...

SKU: SF-COM-09609 | Brand: SparkFun

This is a simple SPDT slide switch - great for use as an ON/OFF button, or just as a general control switch. The pins are spaced by 0.1", however they are incredibly thin making breadboard use not recommended. The swi...

SKU: SF-PRT-14490 | Brand: SparkFun

Standard 330 Ω through-hole resistors rated at ¼ W with ±5% tolerance. These thick-lead versions fit securely into breadboards with minimal movement, making them reliable for prototyping. 330 Ω resistors are commonly...

SKU: SF-TOL-09325 | Brand: SparkFun

This is your basic spool of lead free solder with a water soluble resin core. 0.031" gauge and 100 grams. This is a good spool for more advanced users that should last 6-12 months depending on how often you solder....

SKU: SF-COM-09181 | Brand: SparkFun

It’s the end of the world, and you need a button to press. This is it. A 100mm diameter (outside diameter) dome illuminated push button comes with an LED, securing nut and a pre-installed long life horizontal micro...

SKU: SF-DEV-11791 | Brand: SparkFun

This is about 360 yards of conductive thread spun from stainless steel fiber and wound on a spool. You can use it as a creative way to connect various electronics onto clothing projects. This large spool is a great...

SKU: SF-PRT-10007 | Brand: SparkFun

A set of stackable headers designed for the Arduino Uno, Arduino Pro, and other boards using the classic (pre-R3) pin layout. These female headers sit tall enough to clear the USB-B connector, making them ideal for st...

SKU: SF-PRT-13925 | Brand: SparkFun

These headers are made to work with the Teensy 3.2 and Teensy LC development boards. Each kit of headers makes your Teensy breadboard compatible and will allow for stacking a Teensy and Teensy-compatible shield boa...

SKU: SF-DEV-20360 | Brand: SparkFun

The Teensy 4.1 is the newest iteration of the astoundingly popular development platform that features an ARM Cortex-M7 processor at 600MHz, with a NXP iMXRT1062 chip, four times larger flash memory than the 4.0, an...

SKU: SF-WRL-17389 | Brand: SparkFun

This is the Antenna Kit for the Raspberry Pi 4 Compute Module wireless variants. The “duck” style antenna adds range to the wireless radio on the wireless enabled Compute Modules. Something quite desirable if you’r...

SKU: SF-SEN-11050 | Brand: SparkFun

This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire i...

SKU: SF-PRT-09547 | Brand: SparkFun

A 2×AA battery holder with a sliding cover secured by a Phillips head screw and a built-in ON/OFF switch for convenient power control. The 150mm tinned leads make it easy to solder into your projects. Key Features ...