SparkFun
Shop SparkFun Electronics products at Little Bird Electronics, Australia's trusted source for maker and electronics supplies. Browse our range of SparkFun development boards, Qwiic modules, sensors, displays, and accessories — all designed for easy prototyping and learning.
Whether you're building IoT projects, teaching STEM in the classroom, or prototyping professionally, SparkFun's well-documented ecosystem makes getting started straightforward. Fast shipping across Australia.
SparkFun controller:bit - micro:bit Carrier Board (Qwiic)
SKU: SF-DEV-16129 | Brand: SparkFun
The SparkFun controller:bit is a fun-filled "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional controller system. Designed in a similar form factor to the cl...
Delivered by Wed 10 Jun
SparkFun Artemis Module - Low Power Machine Learning BLE Cortex-M4F
SKU: SF-WRL-15484 | Brand: SparkFun
The SparkFun Artemis Module is a compact 10 × 15 mm wireless module built around the Ambiq Apollo3 Cortex-M4F processor with BLE 5.0. Running at 48 MHz (with 96 MHz turbo mode), it draws as little as 6 µA per MHz — ma...
Delivered by Wed 10 Jun
SparkFun Qwiic Kit for Raspberry Pi
SKU: SF-KIT-15367 | Brand: SparkFun
The SparkFun Qwiic Kit for Raspberry Pi provides everything you need to start using I2C sensors and displays with your Raspberry Pi via the Qwiic connector system. The kit includes a Qwiic HAT that adds four Qwiic con...
Delivered by Wed 10 Jun
iFixit Essential Electronics Toolkit
SKU: SF-TOL-15256 | Brand: SparkFun
The iFixit Essential Electronics Toolkit is a compact repair kit containing the precision tools needed for basic electronics maintenance and repair. It includes a selection of common and specialty driver bits, plastic...
Delivered by Wed 10 Jun
SparkFun Distance Sensor Breakout - 4 Meter, VL53L1X (Qwiic)
SKU: SF-SEN-14722 | Brand: SparkFun
This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X uses a VCSEL (V...
Delivered by Wed 10 Jun
SparkFun BlackBoard
SKU: SF-SPX-14669 | Brand: SparkFun
The SparkFun BlackBoard is an Arduino Uno-compatible development board with a range of improvements over the standard Uno. It features the CH340G USB-to-serial converter for broad driver compatibility, a reinforced th...
Delivered by Wed 10 Jun
Bend Labs Digital Flex Sensor - 1-Axis, 4 Inch
SKU: SF-SEN-15244 | Brand: SparkFun
The Bend Labs Digital Flex Sensors are an innovative solution for measuring motion, providing a unique alternative to existing sensor technologies for measuring a highly accurate and drift-free angular displacement in...
Delivered by Wed 10 Jun
Love to Code Chibi Clip Mounting Accessory
SKU: SF-DEV-14593 | Brand: SparkFun
The Chibi Clip is a clothespin-style mounting accessory for the Chibi Chip microcontroller board. It uses spring tension to press the Chip's electrodes onto copper tape circuits built on paper, allowing quick attachme...
Delivered by Wed 10 Jun
7.5 inch ePaper Bare Display
SKU: SF-SPX-14846 | Brand: SparkFun
This 7.5" tri-colour e-paper bare display features 640×385 pixels in black, white, and red. E-paper displays offer a paper-like viewing experience with excellent visibility from almost any angle, even in direct sunlig...
Delivered by Wed 10 Jun
Load Cell - 5kg, Straight Bar (TAL220B)
SKU: SF-SEN-14729 | Brand: SparkFun
A straight bar load cell (strain gauge) that translates up to 5kg of force into an electrical signal. Made from aluminium alloy with four strain gauges in a Wheatstone bridge configuration, it measures electrical resi...
Delivered by Wed 10 Jun
SparkFun GPS Breakout - XA1110 (Qwiic)
SKU: SF-GPS-14414 | Brand: SparkFun
The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chips...
Delivered by Wed 10 Jun
SparkFun IoT Starter Kit with Blynk Board
SKU: SF-KIT-14682 | Brand: SparkFun
The SparkFun IoT Starter Kit with Blynk Board provides a beginner-friendly introduction to the Internet of Things without any programming or soldering required. The Blynk Board comes pre-loaded with projects and conne...
Delivered by Wed 10 Jun
SparkFun gator:bit v2.0 - micro:bit Carrier Board
SKU: SF-DEV-15162 | Brand: SparkFun
The SparkFun gator:bit v2.0 is an all-in-one “carrier” board for your micro:bit that provides you with a fully functional development and prototyping platform. Almost every pin on the micro:bit is broken out to pads t...
Delivered by Wed 10 Jun
JST-PH Male to JST-SM Male Adapter - 100mm
SKU: SF-PRT-14998 | Brand: SparkFun
A short adapter cable with a JST-PH male connector on one end and a JST-SM male connector on the other. Use it to bridge between devices with different JST connector types, including EL wire and panel products. Key F...
Delivered by Wed 10 Jun
Raspberry Pi Display Adapter
SKU: SF-LCD-12088 | Brand: SparkFun
The Raspberry Pi Display Adapter is a simple Raspberry Pi adapter designed to provide a convenient interface to attach 4D Systems display modules to the Raspberry Pi platform, without having to use jumper wires on the...
Delivered by Wed 10 Jun
SparkFun Serial Controlled Motor Driver
SKU: SF-ROB-09571 | Brand: SparkFun
The SparkFun Serial Controlled Motor Driver allows you to control up to two DC motors using a serial command interface. The serial interface is easy to use and it lets the user select an individual motor, the directio...
Delivered by Wed 10 Jun
4-Way Tilt Sensor - RPI-1031
SKU: SF-SEN-10313 | Brand: SparkFun
The RPI-1031 is a 4-directional tilt sensor that detects orientation using internal infrared emitters and detectors. Unlike simple single-axis tilt switches, this sensor can distinguish between multiple orientations, ...
Delivered by Wed 10 Jun
SparkFun Quadstepper Motor Driver Board
SKU: SF-ROB-10507 | Brand: SparkFun
The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driver has an output drive capacity of 35V and 1Amps. The board is capable o...
Delivered by Wed 10 Jun
Motor Mount
SKU: SF-ROB-11278 | Brand: SparkFun
Our Mini Metal Gearmotors are great for small robots but they can be hard to mount. Luckily, our brilliant Ministry of Machinery has spun up these plastic motor mounts. Simply bolt the mount to the faceplate of the mo...
Delivered by Wed 10 Jun
Header - 6-pin Female (0.1, Right Angle)
SKU: SF-PRT-09429 | Brand: SparkFun
This is a through-hole 6-pin right-angle female header. This header connects perfectly with the 6-pin male header on Arduino Pros and LilyPad Main Boards. Pins are spaced by 0.1".Documents:Datasheet
Delivered by Wed 10 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
