SparkFun

SKU: SF-BOB-13021 | Brand: SparkFun

This is the SparkFun RJ45 MagJack Breakout, a simple board that will provide you with a way to put an ethernet port into your breadboard. The SparkFun RJ45 MagJack Breakout is the same one found in our very own mbe...

SKU: SF-SEN-12969 | Brand: SparkFun

A 10-pack of disposable biomedical sensor pads (electrodes) for measuring EEG, ECG, and EMG signals. Each pad features integrated latex-free gel for strong skin adhesion and a snap connector that attaches easily to el...

SKU: SF-BOB-10680 | Brand: SparkFun

A breakout board for the SOIC version of the 74HC595 8-bit shift register IC. Shift registers let you expand the number of digital outputs available on your microcontroller by clocking in serial data and latching it t...

SKU: SF-COM-10635 | Brand: SparkFun

A 10 mm through-hole blue LED with a diffused lens. The opaque epoxy package produces a soft, even glow rather than a focused beam, making it ideal for indicators and decorative lighting where a wide viewing angle is ...

SKU: SF-WRL-10535 | Brand: SparkFun

These wireless transmitters work with our 315MHz receivers. They can easily fit into a breadboard and work well with microcontrollers to create a very simple wireless data link. Since these are only transmitters, they...

SKU: SF-PRT-10501 | Brand: SparkFun

This is a 2-pin JST RCY connector typically used for low-voltage applications running 10A or less. They are commonly found in RC vehicles. These come in a bag of 1 male plug, 1 female plug, plus pins to connect them b...

SKU: SF-PRT-10373 | Brand: SparkFun

This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST RE connector on both ends. These are simple jumper wires used on standard 0.1" breakaway he...

SKU: SF-CAB-10215 | Brand: SparkFun

A standard USB 2.0 Type-A to Micro-B cable, 1.8 m (6 ft) in length. Micro USB is the standard connector found on a wide range of development boards, microcontrollers, and electronics accessories. Key Features USB 2...

SKU: SF-DEV-12660 | Brand: SparkFun

The SparkFun MP3 Player Shield is an awesome MP3 decoder with the capabilities of storing music files onto a run-of-the-mill microSD card, thus giving you the ability toadd music or sound effects to any project. Wi...

SKU: SF-PRT-10158 | Brand: SparkFun

These are a longer version of our standard break away headers. They are 20mm long which allows you use them socket to socket. The plastic separator can be slid up or down to accommodate your needs. You will ge...

SKU: SF-PRT-10112 | Brand: SparkFun

This 2 mm pitch 10-pin header mates with 2 mm XBee sockets and is ideal for creating custom breakout boards, "dummy" XBee modules for testing, or any project requiring 2 mm pitch pin headers. Key Features 2 mm Pitc...

SKU: SF-PRT-09916 | Brand: SparkFun

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare cable on the opposite end. It also comes with the mating connector f...

SKU: SF-DEV-09716 | Brand: SparkFun

This is the newest revision of our FTDI Basic. We now use a SMD 6-pin header on the bottom, which makes it smaller and more compact. Functionality has remained the same. This is a basic breakout board for the FTDI...

SKU: SF-COM-09650 | Brand: SparkFun

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standard green LED. The lens is 3mm in diameter, and is diffused.

SKU: SF-COM-09483 | Brand: SparkFun

A basic 4-digit 7-segment display in red. This common anode display features one decimal point per digit, plus individually controllable apostrophe and colon points — perfect for clocks, counters, and numeric readouts...

SKU: SF-COM-09479 | Brand: SparkFun

The LN298 is a high voltage, high current, dual full-bridge motor driver designed to accept standard TTL logic levels and drive inductive loads such as relays, solenoids, DC and stepping motors. Comes in a stagge...

SKU: SF-PRT-09385 | Brand: SparkFun

A pack of 10 premium 12″ (30 cm) male-to-female jumper wires for breadboarding, prototyping, and connecting to 0.1″ pitch headers. Each wire has a male pin on one end and a female socket on the other, making them vers...

SKU: SF-COM-13326 | Brand: SparkFun

Sometimes when you have too many choices, it’s hard to make a good decision. In fact, there are times when you just want a bag of LEDs, just one of each, that’s all you want. Well here you go! The LED Mixed Bag con...

SKU: SF-PRT-10588 | Brand: SparkFun

Simple breakout board for the 3.5mm audio jack. Use this breakout (shipped bare) to allow breadboard or SIP access to the super-common 3.5mm audio jack. All five pins are broken out.

SKU: SF-COM-08890 | Brand: SparkFun

This is your standard fridge magnet, perfect for holding up quite a bit of weight. Grade C8, ceramic disk magnet. Magnetization is throughout the thickness of the magnet. We used this part with the SparkFun flame kits...