SparkFun
Shop SparkFun Electronics products at Little Bird Electronics, Australia's trusted source for maker and electronics supplies. Browse our range of SparkFun development boards, Qwiic modules, sensors, displays, and accessories — all designed for easy prototyping and learning.
Whether you're building IoT projects, teaching STEM in the classroom, or prototyping professionally, SparkFun's well-documented ecosystem makes getting started straightforward. Fast shipping across Australia.
Battery Holder - 2x18650 (wire leads)
SKU: SF-PRT-12900 | Brand: SparkFun
This is an incredibly simple two cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fair since that is what they have been primarily used for. However, with...
Delivered by Wed 18 Nov
LED - RGB Addressable, PTH, 8mm (5 Pack)
SKU: SF-COM-12877 | Brand: SparkFun
We know this looks like a lot of our other LEDs, but it’s not! This is a PTH Addressable RGB LED with a WS2812 control IC built right into the LED. This PTH version is incredibly similar to its SMD cousin, except it i...
Delivered by Wed 18 Nov
Big Easy Driver
SKU: SF-ROB-12859 | Brand: SparkFun
The Big Easy Driver is a stepper motor driver board for bipolar stepper motors up to 2 A per phase, based on the Allegro A4988 driver chip. Designed by Brian Schmalz, it's the successor to the popular Easy Driver boar...
Delivered by Wed 18 Nov
Needle Set
SKU: SF-TOL-10405 | Brand: SparkFun
This sewing needle set is designed for e-textile projects, with eye sizes large enough to easily thread conductive thread. The set includes both large and small needles to suit different stitching needs — from thick f...
Delivered by Wed 18 Nov
EasyDriver - Stepper Motor Driver
SKU: SF-ROB-12779 | Brand: SparkFun
The EasyDriver is a simple to use stepper motor driver, compatible with anything that can output a digital 0 to 5V pulse (or 0 to 3.3V pulse if you solder SJ2 closed on the EasyDriver). The EasyDriver requires a 6V to...
Delivered by Wed 18 Nov
Tilt Sensor - AT407
SKU: SF-SEN-10289 | Brand: SparkFun
This AT407 basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pins when the case is upright. Tilt the case over and the balls don’t touch, thus not making a...
Delivered by Wed 18 Nov
Audio Jack - 3.5mm TRRS (SMD)
SKU: SF-PRT-12639 | Brand: SparkFun
A 3.5mm TRRS (tip, ring, ring, sleeve) audio jack in a surface-mount package. Unlike standard stereo TRS connectors, TRRS provides three conductors plus ground, allowing it to carry stereo audio along with an addition...
Delivered by Wed 18 Nov
SparkFun FTDI Basic Breakout - 3.3V
SKU: SF-DEV-09873 | Brand: SparkFun
The SparkFun FTDI Basic Breakout provides USB-to-serial conversion using the FTDI FT232RL IC, operating at 3.3V logic levels. Its 6-pin header matches the standard FTDI pinout, making it compatible with Arduino Pro, L...
Delivered by Wed 18 Nov
Heatsink Compound
SKU: SF-PRT-09599 | Brand: SparkFun
A 5g syringe of white thermal compound (also known as thermal grease or thermal paste) for improving heat transfer between components and heatsinks. Essential for any project where heat dissipation is critical. Compo...
Delivered by Wed 18 Nov
SparkFun Pro Micro - RP2350
SKU: SF-DEV-24870 | Brand: SparkFun
The SparkFun RP2350 Pro Micro provides a powerful development platform in SparkFun's compact Pro Micro form factor, built around the RP2350 from the Raspberry Pi Foundation. This board uses the updated Pro Micro form ...
Delivered by Wed 18 Nov
Soldering Stand with Brass Sponge
SKU: SF-TOL-24061 | Brand: SparkFun
Keep your soldering iron secure and your tip clean with this practical Soldering Stand with Brass Sponge. The weighted metal base provides a stable resting place for your iron between tasks, reducing the risk of accid...
Delivered by Wed 18 Nov
SparkFun Indoor Air Quality Sensor - ENS160 (Qwiic)
SKU: SF-SEN-20844 | Brand: SparkFun
The SparkFun ENS160 Indoor Air Quality Sensor is a digital multi-gas sensor solution with four sensor elements that can be used in a wide range of applications including building automation, smart home, and HVAC. The ...
Delivered by Wed 18 Nov
Through-Hole Speaker
SKU: SF-PRT-20660 | Brand: SparkFun
This is a small 15mm round speaker that operates around the audible 2kHz range. You can use these speakers to create simple music or user interfaces.This through-hole speaker is great for projects where you don't have...
Delivered by Wed 18 Nov
Infrared Detector
SKU: SF-SEN-19018 | Brand: SparkFun
An Infrared detector is a detector that reacts to infrared (IR) radiation. These simple devices operate at 940nm and work well for generic IR systems including remote control and touch-less object sensing. Using a sim...
Delivered by Wed 18 Nov
Humidity and Temperature Sensor - DHT20
SKU: SF-SEN-18364 | Brand: SparkFun
The DHT20 is a factory-calibrated digital humidity and temperature sensor with an I²C interface. An upgrade to the popular DHT11/DHT22 series, it provides reliable environmental measurements without requiring addition...
Delivered by Wed 18 Nov
SparkFun Qwiic Shield for Teensy - Extended
SKU: SF-DEV-17156 | Brand: SparkFun
An extended Qwiic shield that adds four Qwiic connectors to Teensy 4.1, Teensy 3.6, and Teensy 3.5 boards. Connects the I²C bus (GND, 3.3 V, SDA, SCL) to two horizontal and two vertical Qwiic ports for easy daisy-chai...
Delivered by Wed 18 Nov
SparkFun Inventor's Kit for Arduino Uno - v4.1
SKU: SF-KIT-15631 | Brand: SparkFun
The SparkFun Inventor's Kit (SIK) for Arduino Uno is a great way to get started with programming and hardware interaction with the Arduino programming language. The SIK includes everything you need to complete five ov...
Delivered by Wed 18 Nov
Reversible USB A to C Cable - 2m
SKU: SF-CAB-15424 | Brand: SparkFun
USB-C is fantastic. What makes this cable even better is that one of the features we love so much about USB-C has been replicated to the USB-A 2.0 plug! These cables have minor, yet genius modifications that allow the...
Delivered by Wed 18 Nov
Alligator Clip with Female Header (10 Pack)
SKU: SF-CAB-15186 | Brand: SparkFun
A 10-pack of cables with an alligator clip on one end and a female header on the other. These cables bridge the gap between clip-based prototyping and standard 0.1" pin headers, making it easy to connect alligator cli...
Delivered by Wed 18 Nov
Multicolor Buttons - 4-pack
SKU: SF-PRT-14460 | Brand: SparkFun
This is a simple 4-pack of multicolor buttons, great for all sorts of projects! Unlike previous iterations of multicolor buttons, this pack’s tactile switches are actually recessed into the housing so they don’t ac...
Delivered by Wed 18 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
