Resistors

An adjustable potentiometer can open up many interesting user interfaces. Turn the pot and the resistance changes. Connect VCC to an outer pin, GND...

ΩMG! You're not going to be able to resist these handy resistor packs! Well, axially, they do all of the resisting for you!These are  25 Packs of R...

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,...

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000...

This is a very common signal diode - 1N4148. Use this for signals up to 200mA of current. If you need a bunch of these, you can get good bulk dis...

Simple shrouded 10-pin connector. Good for preventing cable connection mishaps. Use for programming, data, power, or any other kind of connection. ...

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limi...

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 10K resistors make excellent pull-ups, pull-d...

These are very small surface mount quartz crystals used where size is a concern. Ideal for use with Phillips LPC ARM ICs. Note: Quite a few of the...

120R 1/2W -  Same size as standard 1/4W carbon film. Specifications Resistance level120Ωresistance tolerance1%Continuous Power0.5WComponent...

300R 1/2W -  Same size as standard 1/4W carbon film.  Specifications Resistance level ...

470R 1/2W -  Same size as standard 1/4W carbon film. Specifications Resistance level ...

1.0M Ohm, ¼th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards.We’ve opted for a new and more breadboard-frien...

10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Visha...

Resonators function like crystals but stick closer to their specified frequency over a full temperature range. These resonators are +/-0.5% or bett...

These are ¼th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 100 Ohm resistors make excellent pull-up...

These are ¼th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 1K Ohm resistors make excellent pull-ups...

1/6 Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limiters ...

This is a basic, general-purpose red LED in a standard T1 (3mm) package with 0.1" lead spacing.

Need to measure something damp? This epoxy-coated precision 1% 10K thermistor is an inexpensive way to measure temperature in weather or liquids. T...

This little piece of notched plastic is a Resistor Lead Bending Tool. Sometimes referred to as a “forming” tool, this little guy provides you with ...

A ceramic capactior is a fixed-value capactior in which ceramic material acts as the dielectric. It is constructed of two or more alternati...

If you ever find yourself connecting handfuls of resistors to the ground bus of your breadboard, you may consider these SIL-packaged resistors a...