SparkFun Qwiic Ecosystem

SKU: AF-6357 | Brand: Adafruit

Add rotational sensing without a mechanical connection using the AS5600 magnetic angle sensor. This breakout can sense a rotating north/south magnetic field up to 3mm away from the chip body, making it useful for fric...

SKU: AF-4503 | Brand: Adafruit

Add motion and orientation sensing to your project with this compact 6 Degree of Freedom IMU breakout built around the ST LSM6DS3TR-C. It combines a 3-axis accelerometer for measuring gravity and acceleration with a 3...

SKU: SF-GPS-19390 | Brand: SparkFun

This NEO-D9S breakout is an L-Band satellite correction data receiver designed to feed correction streams to a compatible multi-band, high-precision GNSS receiver such as the u-blox ZED-F9P. With a clear view of the s...

SKU: SF-GPS-29888 | Brand: SparkFun

Build high-accuracy positioning projects around a Raspberry Pi with this GNSS Flex pHAT and included ZED-X20P and IM19 module. It combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU for centim...

SKU: SF-GPS-28962 | Brand: SparkFun

This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. Th...

SKU: SF-GPS-29208 | Brand: SparkFun

Built around Septentrio’s mosaic-G5 P3, this compact GNSS RTK breakout is designed for projects that need survey-grade positioning without giving up space or power budget. It offers the same leading performance as the...

SKU: SF-KIT-15209 | Brand: SparkFun

This kit gives you the core hardware needed to start reading 125kHz RFID tags over I2C, without hunting for a separate reader module, antenna or wiring up a complex circuit. The box includes a SparkFun RFID Qwiic Read...

SKU: SF-COM-16916 | Brand: SparkFun

Add letters, numbers and symbols to your project with red fourteen-segment digits that are much more flexible than a basic seven-segment display. This Qwiic display connects over I2C, so you can plug it in without sol...

SKU: SF-GPS-26916 | Brand: SparkFun

This compact high-precision positioning board combines a Quectel LG290P GNSS RTK receiver with an Espressif ESP32-PICO-MINI-02 MCU module. It runs SparkFun’s RTK Everywhere firmware, letting it operate as a base stati...

SKU: SF-SEN-24409 | Brand: SparkFun

This compact breakout board measures moisture in soil and similar materials using two large exposed pads as conductivity probes. As the soil gets wetter, conductivity between the pads increases, resistance drops, and ...

SKU: SF-LCD-29530 | Brand: SparkFun

This compact OLED board gives your project a crisp monochrome white-on-black interface in a 1.5-inch square form factor. With 128x128 pixels and a 1:1 aspect ratio, it suits custom graphics, menus, status screens and ...

SKU: SF-COM-30416 | Brand: SparkFun

Control higher-power loads from a microcontroller over I2C with this Qwiic relay board. It is built around the Omron G6K-2F-Y DC3 dual-pole/dual-throw relay, letting a low-voltage logic system switch loads up to 1A at...

SKU: AF-5603 | Brand: Adafruit

Add a bright numeric display to your project without giving up a pile of microcontroller pins. This assembled Adafruit LED backpack pairs an ultra-bright green 4-digit, 0.56 inch seven-segment display with a driver bo...

SKU: SF-DEV-20748 | Brand: SparkFun

This single-board carrier lets you connect one MicroMod Processor Board to one MicroMod Function Board using SparkFun’s M.2-based MicroMod ecosystem. Align the keyed edge connector, fasten the boards with screws, and ...

SKU: SF-COM-16917 | Brand: SparkFun

Show numbers, letters, characters and symbols in bright blue with this compact four-character alphanumeric display. Each digit uses fourteen segments, giving you far more flexibility than a standard seven-segment disp...

SKU: SF-GPS-23288 | Brand: SparkFun

Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in ...

SKU: SF-GPS-26620 | Brand: SparkFun

Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout ...

SKU: SF-KIT-23452 | Brand: SparkFun

Get started with high-precision RTK GNSS and dead reckoning using u-blox's ZED-F9R module. This kit combines a sensor-fusion GPS breakout, a multiband SMA antenna and a USB cable so you have the core hardware needed f...

SKU: SF-WRL-21327 | Brand: SparkFun

This board is a low-power 2.4GHz BT beacon breakout built around the InPlay IN100 NanoBeacon. It is designed for fast deployment in wireless sensor monitoring, asset tracking, retail beaconing and real-time location t...

SKU: SF-GPS-22693 | Brand: SparkFun

This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, corr...