SparkFun Qwiic Ecosystem

SKU: SF-GPS-22693 | Brand: SparkFun

This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, corr...

SKU: SF-SEN-27544 | Brand: SparkFun

When the ADC built into your microcontroller is not precise enough, this Qwiic breakout adds a high-resolution Texas Instruments ADS1219 for measuring very small analogue voltage changes.The board provides four channe...

SKU: SF-COM-28236 | Brand: SparkFun

This add-on board solves a common Raspberry Pi Pico HAT problem: fixed orientation. It takes the standard pinout for a Raspberry Pi Pico development board and flips it as if the Pico had been physically rotated over, ...

SKU: SF-SEN-29529 | Brand: SparkFun

This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for ...

SKU: SF-GPS-28019 | Brand: SparkFun

This high-precision positioning breakout is built around the Quectel LG580P GNSS module, giving projects centimetre-level RTK positioning plus instantaneous heading when used with two GNSS antennas. Unlike systems tha...

SKU: SF-GPS-30018 | Brand: SparkFun

Built around the u-blox SAM-M8Q module, this compact GNSS receiver is a straightforward way to add location tracking to a project. Plug in USB-C for power and configuration, or use the Qwiic connectors for solder-free...

SKU: SF-GPS-30975 | Brand: SparkFun

Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring e...

SKU: SF-WRL-17381 | Brand: SparkFun

Built around Espressif’s ESP32-WROOM-32UE module, this Thing Plus board gives you a compact foundation for connected projects that need WiFi, Bluetooth and a flexible antenna setup. The onboard U.FL connector lets you...

SKU: SF-SEN-23220 | Brand: SparkFun

Measure visible and near-infrared light with a compact Qwiic breakout based on the AS7343 multi-spectral sensor. It covers approximately 380nm to 1000nm and is suited to reflected, emitted and transmitted light measur...

SKU: SF-WRL-30678 | Brand: SparkFun

Built around Espressif’s ESP32-C5-WROOM-1 module, this Thing Plus board gives IoT projects a compact microcontroller platform with dual-band WiFi 6, Bluetooth 5 LE, Zigbee and Thread connectivity. It pairs a 32-bit RI...

SKU: AF-6365 | Brand: Adafruit

This compact breakout adds a 4-pin JST SH connector to a Raspberry Pi or compatible board, giving you a quick STEMMA QT/Qwiic connection for I2C sensors and devices. The 2x3 socket plugs onto the Pi’s I2C and power pi...

SKU: AF-6489 | Brand: Adafruit

This breakout makes it easy to add 3D Hall-effect magnetic sensing to a microcontroller project. The TMAG5273 integrates independent X, Y and Z Hall-effect sensors with a 12-bit ADC, giving you magnetic measurements o...

SKU: AF-6064 | Brand: Adafruit

Need approximate distance sensing over tens of centimetres to around a metre, plus ambient light measurement from the same board? This breakout carries Vishay’s VCNL4200, a two-in-one IR proximity and ambient light se...

SKU: AF-6490 | Brand: Adafruit

This breakout carries the TMAG5273 A2, a low-power linear 3D Hall-effect sensor for measuring magnetic fields across the X, Y and Z axes. Its built-in 12-bit ADC provides axis readings over I2C, and there is also an i...

SKU: SF-SEN-31437 | Brand: SparkFun

Monitor DC current and power over I2C with this Qwiic breakout based on the Texas Instruments INA237 digital power monitor. It measures current, bus voltage, internal temperature and power for an in-line DC input usin...

SKU: SF-SEN-31438 | Brand: SparkFun

This compact Qwiic breakout uses the Texas Instruments INA228 digital power monitor to measure DC current and power with high precision over I2C. The onboard 20-bit delta-sigma ADC supports readings for current, volta...

SKU: PI-PIM721 | Brand: Pimoroni

The Tiny 2350 is a postage-stamp-sized development board powered by the RP2350A — a dual ARM Cortex-M33 running at up to 150 MHz with 520 KB SRAM and 4 MB of QSPI flash. It's programmable via USB-C with C/C++ or Micro...

SKU: SF-DEV-17512 | Brand: SparkFun

The SparkFun Qwiic pHAT Extension for Raspberry Pi 400 provides access to the Pi 400's GPIO header while adding Qwiic I2C connectivity. The board connects via a 2×20 right-angle header and extends out to the edge of t...

SKU: SF-BOB-16784 | Brand: SparkFun

The SparkFun Qwiic Mux Breakout uses the TCA9548A to provide 8 independent I2C channels, solving the common problem of multiple sensors sharing the same address. Simply route each device to its own channel and communi...

SKU: SF-SEN-22494 | Brand: SparkFun

The STHS34PF80 sensor, from ST Microelectronics, is designed to measure the precise black-body radiation (as described by Planck's law) of an object; as well as monitor ambient temperature conditions within its 80° fi...