SparkFun Qwiic Ecosystem

SKU: SF-SEN-30183 | Brand: SparkFun

This compact digital compass module is built around the HMC6343, a fully integrated electronic compass designed to deliver reliable heading data without making your main microcontroller do all the processing.Unlike ba...

SKU: SF-SEN-30480 | Brand: SparkFun

This capacitive soil moisture breakout is designed for plant monitoring projects where exposed metal probes can corrode after time in the dirt. It measures moisture using a capacitive plate embedded in the board, mana...

SKU: DF-DFR1256 | Brand: DFRobot

The Arduino UNO Q is a hybrid development board that combines a Qualcomm® Dragonwing™ MPU running Linux Debian with an STM32 real-time MCU. It is designed for projects that need both single-board-computer style proces...

SKU: SF-DEV-27874 | Brand: SparkFun

The Alchitry Au V2 is a powerful FPGA development board built around a Xilinx Artix 7 device. It is aimed at engineers, students and makers who are ready to move beyond microcontroller-style programming and into field...

SKU: SF-DEV-27875 | Brand: SparkFun

The Alchitry Cu V2 is an accessible FPGA development board for getting started with field-programmable gate arrays without stepping up to a higher-power board. It keeps the Cu concept in the newer Alchitry V2 format, ...

SKU: SF-BOB-31206 | Brand: SparkFun

Generate a real analogue output from your microcontroller instead of relying on PWM. This MCP4725 breakout is a 12-bit Digital-to-Analogue Converter (DAC) that outputs precise voltage levels over an I2C/Qwiic connecti...

SKU: SF-SEN-15191 | Brand: SparkFun

This Qwiic RFID reader breakout makes it much easier to add low-frequency 125kHz RFID scanning to a project. It is designed for ID Innovations ID-3LA, ID-12LA and ID-20LA reader modules, converting the module output i...

SKU: SF-SEN-29260 | Brand: SparkFun

Measure high concentrations of carbon dioxide with a Qwiic breakout built around Sensirion’s STC31 sensor. It is designed for CO2 measurements up to 100% volume, using a thermal conductivity measurement principle and ...

SKU: SF-SEN-29259 | Brand: SparkFun

Built around the Allegro ACS37800, this Qwiic power meter lets your project monitor voltage and current at the same time over I2C. It is designed for higher-demand loads such as 3D printers, UAVs and solar panels, wit...

SKU: SF-SEN-30282 | Brand: SparkFun

Build a connected weighing system without starting from low-level load cell code. OpenScale IoT is a wireless scale controller built around the ESP32-PICO-MINI, designed to turn a standard load cell setup into a confi...

SKU: AF-6407 | Brand: Adafruit

This Bosch BMP581 breakout is a precision barometric pressure, temperature and altimeter sensor for environmental sensing, drones, wearables and projects that need to track height above sea level. It offers much finer...

SKU: AF-6357 | Brand: Adafruit

Add rotational sensing without a mechanical connection using the AS5600 magnetic angle sensor. This breakout can sense a rotating north/south magnetic field up to 3mm away from the chip body, making it useful for fric...

SKU: AF-4503 | Brand: Adafruit

Add motion and orientation sensing to your project with this compact 6 Degree of Freedom IMU breakout built around the ST LSM6DS3TR-C. It combines a 3-axis accelerometer for measuring gravity and acceleration with a 3...

SKU: SF-GPS-19390 | Brand: SparkFun

This NEO-D9S breakout is an L-Band satellite correction data receiver designed to feed correction streams to a compatible multi-band, high-precision GNSS receiver such as the u-blox ZED-F9P. With a clear view of the s...

SKU: SF-WRL-18712 | Brand: SparkFun

Built for field deployments well beyond WiFi and mobile coverage, this compact tracker combines an Iridium 9603N Short Burst Data modem with the Arduino-compatible Artemis module. It can send and receive short satelli...

SKU: SF-GPS-29891 | Brand: SparkFun

Build high-accuracy GNSS projects on a Raspberry Pi with this GNSS Flex pHAT and matched LG290P plus IM19 module. It combines Quectel's quad-band LG290P RTK receiver with the Feyman IM19 IMU for centimetre-level posit...

SKU: SF-GPS-29887 | Brand: SparkFun

Bring high-precision GNSS to a Raspberry Pi with this GNSS Flex pHAT and u-blox ZED-X20P receiver module. It is built for centimetre-level positioning in demanding navigation and control projects such as UAVs, guidanc...

SKU: SF-GPS-29888 | Brand: SparkFun

Build high-accuracy positioning projects around a Raspberry Pi with this GNSS Flex pHAT and included ZED-X20P and IM19 module. It combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU for centim...

SKU: SF-GPS-28962 | Brand: SparkFun

This carrier board brings the GNSS Flex ecosystem out to a practical development breakout, so you can use your chosen GNSS Flex module on a breadboard, with a flight controller, or inside a custom navigation build. Th...

SKU: SF-GPS-29208 | Brand: SparkFun

Built around Septentrio’s mosaic-G5 P3, this compact GNSS RTK breakout is designed for projects that need survey-grade positioning without giving up space or power budget. It offers the same leading performance as the...