SparkFun Qwiic Ecosystem
The SparkFun Qwiic connector system makes I2C wiring simple — just plug in a cable and start reading sensors. No soldering, no jumper wires, no address headaches. Browse our range of Qwiic-compatible boards, environmental sensors, gas sensors, cables, and adapters.
Ideal for rapid prototyping, STEM education, and maker projects across Australia. Qwiic's daisy-chainable design lets hobbyists and professionals build complex sensor networks in minutes. We ship from Australia with fast local delivery.
SparkFun Qwiic Joystick
SKU: SF-COM-15168 | Brand: SparkFun
Now, you can easily add an HID/controller to your project! The SparkFun Qwiic Joystick combines the convenience of the Qwiic connection system and an analog joystick that feels reminiscent of the thumbstick from a Pla...
Delivered by Mon 26 Oct
SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic)
SKU: SF-GPS-15136 | Brand: SparkFun
With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...
Delivered by Mon 26 Oct
SparkFun Triad Spectroscopy Sensor - AS7265x (Qwiic)
SKU: SF-SEN-15050 | Brand: SparkFun
The SparkFun Triad Spectroscopy Sensor combines three AS7265x spectral sensors with onboard UV, visible, and IR LEDs to measure light across 18 individual frequencies — from 410 nm (UV) to 940 nm (IR). It brings light...
Delivered by Mon 26 Oct
SparkFun Human Presence Sensor Breakout - AK9753 (Qwiic)
SKU: SF-SEN-14349 | Brand: SparkFun
This is not your normal Passive Infrared (PIR) sensor! The SparkFun AK9753 Human Presence Sensor Breakout is a Qwiic-enabled, 4-channel Nondispersive Infrared (NDIR) sensor. Each channel has a different field of view...
Delivered by Mon 26 Oct
RedBoard Plus Arduino-Compatible Development Board
SKU: SF-DEV-18158 | Brand: SparkFun
This Arduino-compatible development board keeps the familiar Uno-style layout while adding a few genuinely handy upgrades for modern projects. Built around the ATmega328P, it works with the Arduino IDE and fits the Un...
Delivered by Mon 26 Oct
LIS3DH Triple Axis Accelerometer Breakout (Qwiic)
SKU: SF-SEN-29528 | Brand: SparkFun
Add motion sensing to your project with this Qwiic-enabled LIS3DH breakout. The LIS3DH is a smart, low-power, three-axis capacitive micro-machined accelerometer with 12-bit resolution, suited to translation, motion, o...
Delivered by Mon 26 Oct
FPC2534 Qwiic Fingerprint Sensor
SKU: SF-SEN-29854 | Brand: SparkFun
This breakout brings secure fingerprint authentication to embedded projects while keeping the complex biometric work on the sensor itself. Built around the FPC2534 from Fingerprint Cards AB, it handles enrolment, encr...
Delivered by Mon 26 Oct
RFID Qwiic Reader for ID Innovations Modules
SKU: SF-SEN-15191 | Brand: SparkFun
This Qwiic RFID reader breakout makes it much easier to add low-frequency 125kHz RFID scanning to a project. It is designed for ID Innovations ID-3LA, ID-12LA and ID-20LA reader modules, converting the module output i...
Delivered by Mon 26 Oct
Micro Proximity Sensor - 20 cm VCNL4040 (Qwiic)
SKU: SF-SEN-30161 | Brand: SparkFun
Built around the VCNL4040, this tiny Qwiic Micro breakout provides short-range presence detection for projects where space and weight are tight. It is designed for qualitative sensing: detecting whether an object is p...
Delivered by Mon 26 Oct
RFID Qwiic Kit with ID-12LA 125kHz Reader
SKU: SF-KIT-15209 | Brand: SparkFun
This kit gives you the core hardware needed to start reading 125kHz RFID tags over I2C, without hunting for a separate reader module, antenna or wiring up a complex circuit. The box includes a SparkFun RFID Qwiic Read...
Delivered by Mon 26 Oct
Qwiic Alphanumeric Display - Red
SKU: SF-COM-16916 | Brand: SparkFun
Add letters, numbers and symbols to your project with red fourteen-segment digits that are much more flexible than a basic seven-segment display. This Qwiic display connects over I2C, so you can plug it in without sol...
Delivered by Mon 26 Oct
Qwiic OLED Display - 1.5in 128x128
SKU: SF-LCD-29530 | Brand: SparkFun
This compact OLED board gives your project a crisp monochrome white-on-black interface in a 1.5-inch square form factor. With 128x128 pixels and a 1:1 aspect ratio, it suits custom graphics, menus, status screens and ...
Delivered by Mon 26 Oct
Qwiic Relay - 1x1A DPDT
SKU: SF-COM-30416 | Brand: SparkFun
Control higher-power loads from a microcontroller over I2C with this Qwiic relay board. It is built around the Omron G6K-2F-Y DC3 dual-pole/dual-throw relay, letting a low-voltage logic system switch loads up to 1A at...
Delivered by Mon 26 Oct
Qwiic Alphanumeric Display - Blue
SKU: SF-COM-16917 | Brand: SparkFun
Show numbers, letters, characters and symbols in bright blue with this compact four-character alphanumeric display. Each digit uses fourteen segments, giving you far more flexibility than a standard seven-segment disp...
Delivered by Mon 26 Oct
IN100 NanoBeacon Board with Qwiic
SKU: SF-WRL-21327 | Brand: SparkFun
This board is a low-power 2.4GHz BT beacon breakout built around the InPlay IN100 NanoBeacon. It is designed for fast deployment in wireless sensor monitoring, asset tracking, retail beaconing and real-time location t...
Delivered by Mon 26 Oct
LIS3DH Micro Triple Axis Accelerometer Breakout (Qwiic)
SKU: SF-SEN-29529 | Brand: SparkFun
This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for ...
Out of stock
AS7343 Qwiic Spectral Sensor
SKU: SF-SEN-23220 | Brand: SparkFun
Measure visible and near-infrared light with a compact Qwiic breakout based on the AS7343 multi-spectral sensor. It covers approximately 380nm to 1000nm and is suited to reflected, emitted and transmitted light measur...
Delivered by Mon 26 Oct
Pi STEMMA QT Breakout for Raspberry Pi
SKU: AF-6365 | Brand: Adafruit
This compact breakout adds a 4-pin JST SH connector to a Raspberry Pi or compatible board, giving you a quick STEMMA QT/Qwiic connection for I2C sensors and devices. The 2x3 socket plugs onto the Pi’s I2C and power pi...
Delivered by Thu 15 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
