SparkFun Qwiic Ecosystem
The SparkFun Qwiic connector system makes I2C wiring simple — just plug in a cable and start reading sensors. No soldering, no jumper wires, no address headaches. Browse our range of Qwiic-compatible boards, environmental sensors, gas sensors, cables, and adapters.
Ideal for rapid prototyping, STEM education, and maker projects across Australia. Qwiic's daisy-chainable design lets hobbyists and professionals build complex sensor networks in minutes. We ship from Australia with fast local delivery.
NEO-D9S GNSS Correction Data Receiver with Qwiic
SKU: SF-GPS-19390 | Brand: SparkFun
This NEO-D9S breakout is an L-Band satellite correction data receiver designed to feed correction streams to a compatible multi-band, high-precision GNSS receiver such as the u-blox ZED-F9P. With a clear view of the s...
Delivered by Fri 28 Aug
u-blox ZED-X20P Allband GNSS RTK Breakout (Qwiic)
SKU: SF-GPS-28871 | Brand: SparkFun
This GNSS RTK breakout brings the u-blox X20 engine to a maker-friendly board for high-precision positioning projects. It is designed around the ZED-X20P all-band receiver and can process signals from GPS, Galileo, Be...
Delivered by Fri 28 Aug
Qwiic Soil Moisture Sensor
SKU: SF-SEN-24409 | Brand: SparkFun
This compact breakout board measures moisture in soil and similar materials using two large exposed pads as conductivity probes. As the soil gets wetter, conductivity between the pads increases, resistance drops, and ...
Delivered by Fri 28 Aug
NEO-F9P GNSS-RTK L1/L5 Breakout with Qwiic
SKU: SF-GPS-23288 | Brand: SparkFun
Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in ...
Delivered by Fri 28 Aug
Quadband GNSS RTK Heading Breakout - LG580P (Qwiic)
SKU: SF-GPS-28019 | Brand: SparkFun
This high-precision positioning breakout is built around the Quectel LG580P GNSS module, giving projects centimetre-level RTK positioning plus instantaneous heading when used with two GNSS antennas. Unlike systems tha...
Delivered by Fri 28 Aug
Thing Plus ESP32 WROOM (U.FL)
SKU: SF-WRL-17381 | Brand: SparkFun
Built around Espressif’s ESP32-WROOM-32UE module, this Thing Plus board gives you a compact foundation for connected projects that need WiFi, Bluetooth and a flexible antenna setup. The onboard U.FL connector lets you...
Delivered by Fri 28 Aug
Thing Plus ESP32-C5 WiFi 6 Development Board
SKU: SF-WRL-30678 | Brand: SparkFun
Built around Espressif’s ESP32-C5-WROOM-1 module, this Thing Plus board gives IoT projects a compact microcontroller platform with dual-band WiFi 6, Bluetooth 5 LE, Zigbee and Thread connectivity. It pairs a 32-bit RI...
Delivered by Fri 28 Aug
SparkFun 16x2 SerLCD - RGB Backlight (Qwiic)
SKU: SF-LCD-16396 | Brand: SparkFun
The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Crystal Display into your project. We've seriously overhauled the PCB de...
Out of stock
SparkFun 6DoF IMU Breakout - ISM330DHCX (Qwiic)
SKU: SF-SEN-19764 | Brand: SparkFun
A Qwiic-compatible breakout board for the STMicroelectronics ISM330DHCX — a high-performance 3D accelerometer and 3D gyroscope designed for industrial applications. The 1" × 1" board communicates over I2C via the Qwii...
Out of stock
SparkFun Triple Axis Digital Accelerometer Breakout - ADXL313 (Qwiic)
SKU: SF-SEN-17241 | Brand: SparkFun
The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g. This breakout measures the static acceleration of gravity in tilt-sensing applications, as ...
Out of stock
LIS3DH Triple Axis Accelerometer Breakout (Qwiic)
SKU: SF-SEN-29528 | Brand: SparkFun
Add motion sensing to your project with this Qwiic-enabled LIS3DH breakout. The LIS3DH is a smart, low-power, three-axis capacitive micro-machined accelerometer with 12-bit resolution, suited to translation, motion, o...
Out of stock
Artemis Global Tracker Satellite GNSS Board
SKU: SF-WRL-18712 | Brand: SparkFun
Built for field deployments well beyond WiFi and mobile coverage, this compact tracker combines an Iridium 9603N Short Burst Data modem with the Arduino-compatible Artemis module. It can send and receive short satelli...
Out of stock
Qwiic OLED Display - 1.5in 128x128
SKU: SF-LCD-29530 | Brand: SparkFun
This compact OLED board gives your project a crisp monochrome white-on-black interface in a 1.5-inch square form factor. With 128x128 pixels and a 1:1 aspect ratio, it suits custom graphics, menus, status screens and ...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
