SparkFun Qwiic Ecosystem
The SparkFun Qwiic connector system makes I2C wiring simple — just plug in a cable and start reading sensors. No soldering, no jumper wires, no address headaches. Browse our range of Qwiic-compatible boards, environmental sensors, gas sensors, cables, and adapters.
Ideal for rapid prototyping, STEM education, and maker projects across Australia. Qwiic's daisy-chainable design lets hobbyists and professionals build complex sensor networks in minutes. We ship from Australia with fast local delivery.
SparkFun Digi XBee® Arduino Shield - USB-C (Qwiic)
SKU: SF-WRL-22131 | Brand: SparkFun
The SparkFun Digi XBee Arduino Shield connects Digi XBee 3 modules to your Arduino, enabling wireless communication via LTE-M/NB-IoT, cellular, and GNSS. Compatible with any through-hole Digi XBee module, this shield ...
Delivered by Fri 28 Aug
SparkFun MicroMod Qwiic Carrier Board - Single
SKU: SF-DEV-17723 | Brand: SparkFun
The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This boa...
Delivered by Fri 28 Aug
SparkFun QwiicBus - MidPoint
SKU: SF-COM-18000 | Brand: SparkFun
The SparkFun QwiicBus MidPoint extends the range of your I2C bus using differential signaling over standard Ethernet cables. Based on the NXP PCA9615 IC, it converts I2C signals (SCL and SDA) into four differential si...
Delivered by Fri 28 Aug
SparkFun Qwiic LED Stick - APA102C
SKU: SF-COM-18354 | Brand: SparkFun
The SparkFun Qwiic LED Stick features ten addressable APA102 LEDs, making it easy to add full color LED control using I2C. Write to individual LEDs to display a count in binary, or write to the whole strip for cool li...
Delivered by Fri 28 Aug
SparkFun GPS Breakout - NEO-M9N, SMA (Qwiic)
SKU: SF-GPS-17285 | Brand: SparkFun
The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options including SMA. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive sign...
Delivered by Fri 28 Aug
SparkFun Qwiic Dual Solid State Relay
SKU: SF-COM-16810 | Brand: SparkFun
The SparkFun Qwiic Dual Solid State Relay is a power delivery board that allows users to switch two AC loads from a low power microcontroller using the SparkFun Qwiic connect system. The board features two 25A/250VAC ...
Delivered by Fri 28 Aug
SparkFun GPS Breakout - NEO-M9N, U.FL (Qwiic)
SKU: SF-GPS-15712 | Brand: SparkFun
The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the ...
Delivered by Fri 28 Aug
SparkFun Power Delivery Board - USB-C (Qwiic)
SKU: SF-DEV-15801 | Brand: SparkFun
The SparkFun Power Delivery Board uses the STMicroelectronics STUSB4500 controller to negotiate USB Power Delivery (PD) contracts with compatible chargers and adapters. Instead of being limited to 5 V from a standard ...
Delivered by Fri 28 Aug
SparkFun Qwiic Button - Red LED
SKU: SF-BOB-15932 | Brand: SparkFun
The SparkFun Qwiic Button simplifies adding a tactile button to your I2C project. It handles debouncing, pull-up resistors, and polling internally, so you can focus on your application. A built-in red LED provides vis...
Delivered by Fri 28 Aug
SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic)
SKU: SF-GPS-15210 | Brand: SparkFun
The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positi...
Delivered by Fri 28 Aug
SparkFun GPS Breakout - ZOE-M8Q (Qwiic)
SKU: SF-GPS-15193 | Brand: SparkFun
The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constella...
Delivered by Fri 28 Aug
SparkFun GPS Breakout - XA1110 (Qwiic)
SKU: SF-GPS-14414 | Brand: SparkFun
The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chips...
Delivered by Wed 19 Aug
SparkFun Qwiic Single Relay
SKU: SF-COM-15093 | Brand: SparkFun
Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with...
Delivered by Fri 28 Aug
RedBoard Plus Arduino-Compatible Development Board
SKU: SF-DEV-18158 | Brand: SparkFun
This Arduino-compatible development board keeps the familiar Uno-style layout while adding a few genuinely handy upgrades for modern projects. Built around the ATmega328P, it works with the Arduino IDE and fits the Un...
Delivered by Fri 28 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
