SparkFun Qwiic Ecosystem

SKU: SF-LCD-29530 | Brand: SparkFun

This compact OLED board gives your project a crisp monochrome white-on-black interface in a 1.5-inch square form factor. With 128x128 pixels and a 1:1 aspect ratio, it suits custom graphics, menus, status screens and ...

SKU: SF-COM-30416 | Brand: SparkFun

Control higher-power loads from a microcontroller over I2C with this Qwiic relay board. It is built around the Omron G6K-2F-Y DC3 dual-pole/dual-throw relay, letting a low-voltage logic system switch loads up to 1A at...

SKU: SF-DEV-20748 | Brand: SparkFun

This single-board carrier lets you connect one MicroMod Processor Board to one MicroMod Function Board using SparkFun’s M.2-based MicroMod ecosystem. Align the keyed edge connector, fasten the boards with screws, and ...

SKU: SF-COM-16917 | Brand: SparkFun

Show numbers, letters, characters and symbols in bright blue with this compact four-character alphanumeric display. Each digit uses fourteen segments, giving you far more flexibility than a standard seven-segment disp...

SKU: SF-GPS-23288 | Brand: SparkFun

Bring high-precision GNSS positioning to your project with the u-blox NEO-F9P engine and dual-band L1/L5 reception. L5 signals sit in the protected ARNS band, helping reduce RF interference and improve reliability in ...

SKU: SF-WRL-21327 | Brand: SparkFun

This board is a low-power 2.4GHz BT beacon breakout built around the InPlay IN100 NanoBeacon. It is designed for fast deployment in wireless sensor monitoring, asset tracking, retail beaconing and real-time location t...

SKU: SF-GPS-22693 | Brand: SparkFun

This high-precision GNSS breakout is built around the u-blox ZED-F9R, combining RTK positioning with Automotive Dead Reckoning (ADR) sensor fusion. It fuses a 3D IMU sensor, wheel ticks, a vehicle dynamics model, corr...

SKU: SF-GPS-28019 | Brand: SparkFun

This high-precision positioning breakout is built around the Quectel LG580P GNSS module, giving projects centimetre-level RTK positioning plus instantaneous heading when used with two GNSS antennas. Unlike systems tha...

SKU: SF-GPS-30018 | Brand: SparkFun

Built around the u-blox SAM-M8Q module, this compact GNSS receiver is a straightforward way to add location tracking to a project. Plug in USB-C for power and configuration, or use the Qwiic connectors for solder-free...

SKU: SF-GPS-30975 | Brand: SparkFun

Built around the u-blox ZED-F9T-20B receiver, this breakout is made for projects where precise time matters as much as location. Under clear skies it can provide five nanoseconds of timing accuracy without requiring e...

SKU: SF-WRL-17381 | Brand: SparkFun

Built around Espressif’s ESP32-WROOM-32UE module, this Thing Plus board gives you a compact foundation for connected projects that need WiFi, Bluetooth and a flexible antenna setup. The onboard U.FL connector lets you...

SKU: SF-WRL-30678 | Brand: SparkFun

Built around Espressif’s ESP32-C5-WROOM-1 module, this Thing Plus board gives IoT projects a compact microcontroller platform with dual-band WiFi 6, Bluetooth 5 LE, Zigbee and Thread connectivity. It pairs a 32-bit RI...

SKU: SF-ROB-30118 | Brand: SparkFun

Stepper motor builds often need a microcontroller, a separate driver, a 12V or 24V supply and plenty of wiring. This compact controller from Things by Josh brings that stack together in one unit designed to mount dire...

SKU: AF-6365 | Brand: Adafruit

This compact breakout adds a 4-pin JST SH connector to a Raspberry Pi or compatible board, giving you a quick STEMMA QT/Qwiic connection for I2C sensors and devices. The 2x3 socket plugs onto the Pi’s I2C and power pi...

SKU: AF-6064 | Brand: Adafruit

Need approximate distance sensing over tens of centimetres to around a metre, plus ambient light measurement from the same board? This breakout carries Vishay’s VCNL4200, a two-in-one IR proximity and ambient light se...

SKU: SF-SEN-22857 | Brand: SparkFun

Virtual reality is in, but you shouldn't have to drop hundreds of dollars to gain access to the technology behind it. Luckily, that's where the SparkFun VR IMU Breakout comes in. At its heart is CEVA’s BNO086, a combi...

SKU: SF-DEV-17512 | Brand: SparkFun

The SparkFun Qwiic pHAT Extension for Raspberry Pi 400 provides access to the Pi 400's GPIO header while adding Qwiic I2C connectivity. The board connects via a 2×20 right-angle header and extends out to the edge of t...

SKU: SF-SEN-24904 | Brand: SparkFun

The SparkFun Qwiic Optical Tracking Odometry Sensor empowers you to elevate your robot's navigation capabilities with exceptional precision and streamlined integration. This compact, all-in-one sensor leverages the po...

SKU: SF-BOB-16784 | Brand: SparkFun

The SparkFun Qwiic Mux Breakout uses the TCA9548A to provide 8 independent I2C channels, solving the common problem of multiple sensors sharing the same address. Simply route each device to its own channel and communi...

SKU: SF-SEN-22398 | Brand: SparkFun

The SparkFun BMI270 Micro 6DoF IMU Breakout is a Qwiic-enabled breakout board based on the ultra-low power BMI270 from Bosch. This chip is a highly integrated, low-power IMU optimized for wearables providing precise a...