SparkFun Qwiic Ecosystem
The SparkFun Qwiic connector system makes I2C wiring simple — just plug in a cable and start reading sensors. No soldering, no jumper wires, no address headaches. Browse our range of Qwiic-compatible boards, environmental sensors, gas sensors, cables, and adapters.
Ideal for rapid prototyping, STEM education, and maker projects across Australia. Qwiic's daisy-chainable design lets hobbyists and professionals build complex sensor networks in minutes. We ship from Australia with fast local delivery.
SparkFun GNSS Receiver Breakout - MAX-M10S (Qwiic)
SKU: SF-GPS-18037 | Brand: SparkFun
The SparkFun MAX-M10S Breakout is an ultra-low-power, high performance, miniaturized GNSS board that is perfect for battery operated applications that don't possess a lot of space, such as asset trackers and wearable ...
Out of stock
SparkFun Micro 6DoF IMU - ISM330DHCX (Qwiic)
SKU: SF-SEN-20176 | Brand: SparkFun
The SparkFun Qwiic Micro ISM330DHCX Six Degrees of Freedom IMU is a micro-sized 0.75in. by 0.30in. sensor featuring STMicroelectronics' ISM330DHCX; a high-performance 3D digital accelerometer and 3D digital gyroscope ...
Out of stock
WM8960 Audio Codec Breakout with Headers (Qwiic)
SKU: SF-BOB-21772 | Brand: SparkFun
This WM8960 breakout is a low-power stereo audio codec board for adding audio input and output to digital projects. The WM8960 works as both a stereo audio ADC and DAC, using I2S for audio data while allowing settings...
Out of stock
Micro Proximity Sensor - 20 cm VCNL4040 (Qwiic)
SKU: SF-SEN-30161 | Brand: SparkFun
Built around the VCNL4040, this tiny Qwiic Micro breakout provides short-range presence detection for projects where space and weight are tight. It is designed for qualitative sensing: detecting whether an object is p...
Out of stock
u-blox ZED-X20P Allband GNSS RTK Breakout (Qwiic)
SKU: SF-GPS-28871 | Brand: SparkFun
This GNSS RTK breakout brings the u-blox X20 engine to a maker-friendly board for high-precision positioning projects. It is designed around the ZED-X20P all-band receiver and can process signals from GPS, Galileo, Be...
Out of stock
Qwiic Alphanumeric Display - Red
SKU: SF-COM-16916 | Brand: SparkFun
Add letters, numbers and symbols to your project with red fourteen-segment digits that are much more flexible than a basic seven-segment display. This Qwiic display connects over I2C, so you can plug it in without sol...
Out of stock
Qwiic Soil Moisture Sensor
SKU: SF-SEN-24409 | Brand: SparkFun
This compact breakout board measures moisture in soil and similar materials using two large exposed pads as conductivity probes. As the soil gets wetter, conductivity between the pads increases, resistance drops, and ...
Out of stock
LG290P Quadband GNSS RTK Breakout (Qwiic)
SKU: SF-GPS-26620 | Brand: SparkFun
Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout ...
Out of stock
Qwiic 24-Bit 4-Channel ADC Breakout - ADS1219
SKU: SF-SEN-27544 | Brand: SparkFun
When the ADC built into your microcontroller is not precise enough, this Qwiic breakout adds a high-resolution Texas Instruments ADS1219 for measuring very small analogue voltage changes.The board provides four channe...
Out of stock
LIS3DH Micro Triple Axis Accelerometer Breakout (Qwiic)
SKU: SF-SEN-29529 | Brand: SparkFun
This ultra-small Qwiic-enabled breakout adds three-axis acceleration sensing to compact projects using the LIS3DH, a smart, low-power capacitive micro-machined accelerometer with 12-bit resolution. It can be used for ...
Out of stock
AS7343 Qwiic Spectral Sensor
SKU: SF-SEN-23220 | Brand: SparkFun
Measure visible and near-infrared light with a compact Qwiic breakout based on the AS7343 multi-spectral sensor. It covers approximately 380nm to 1000nm and is suited to reflected, emitted and transmitted light measur...
Out of stock
TMAG5273 A1 3D Hall Effect Magnetometer Breakout
SKU: AF-6489 | Brand: Adafruit
This breakout makes it easy to add 3D Hall-effect magnetic sensing to a microcontroller project. The TMAG5273 integrates independent X, Y and Z Hall-effect sensors with a 12-bit ADC, giving you magnetic measurements o...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
